aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--ubi-utils/tests/Makefile40
-rw-r--r--ubi-utils/tests/README.udev19
-rw-r--r--ubi-utils/tests/common.c336
-rw-r--r--ubi-utils/tests/common.h103
-rw-r--r--ubi-utils/tests/integ.c783
-rw-r--r--ubi-utils/tests/io_basic.c182
-rw-r--r--ubi-utils/tests/io_paral.c251
-rw-r--r--ubi-utils/tests/io_read.c398
-rw-r--r--ubi-utils/tests/io_update.c370
-rw-r--r--ubi-utils/tests/mkvol_bad.c304
-rw-r--r--ubi-utils/tests/mkvol_basic.c253
-rw-r--r--ubi-utils/tests/mkvol_paral.c112
-rw-r--r--ubi-utils/tests/rsvol.c310
-rwxr-xr-xubi-utils/tests/runtests.pl30
-rwxr-xr-xubi-utils/tests/runtests.sh41
15 files changed, 0 insertions, 3532 deletions
diff --git a/ubi-utils/tests/Makefile b/ubi-utils/tests/Makefile
deleted file mode 100644
index 1b17f81..0000000
--- a/ubi-utils/tests/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-
-INCLUDE1=../inc
-INCLUDE2=../../include
-LIB=.
-
-CC := $(CROSS)gcc
-
-ALL_FILES=libubi.a io_update
-ALL_FILES+=io_paral io_read io_basic mkvol_basic mkvol_bad mkvol_paral rsvol
-ALL_FILES+=integ
-
-CFLAGS += -Wall -I$(INCLUDE1) -I$(INCLUDE2) -L$(LIB) -ggdb
-
-all: $(ALL_FILES)
-
-libubi.a: ../src/libubi.c ../inc/libubi.h ../src/libubi_int.h
- $(CC) $(CFLAGS) -c ../src/libubi.c -o libubi.o
- ar cr libubi.a libubi.o
-
-io_paral: io_paral.c common.c
- $(CC) $(CFLAGS) $^ -lubi -lpthread -o $@
-io_update: io_update.c common.c
- $(CC) $(CFLAGS) $^ -lubi -o $@
-io_read: io_read.c common.c
- $(CC) $(CFLAGS) $^ -lubi -o $@
-io_basic: io_basic.c common.c
- $(CC) $(CFLAGS) $^ -lubi -o $@
-mkvol_basic: mkvol_basic.c common.c
- $(CC) $(CFLAGS) $^ -lubi -o $@
-mkvol_bad: mkvol_bad.c common.c
- $(CC) $(CFLAGS) $^ -lubi -o $@
-mkvol_paral: mkvol_paral.c common.c
- $(CC) $(CFLAGS) $^ -lubi -lpthread -o $@
-rsvol: rsvol.c common.c
- $(CC) $(CFLAGS) $^ -lubi -o $@
-integ: integ.c
- $(CC) $(CFLAGS) $^ -lubi -o $@
-
-clean:
- rm -rf $(ALL_FILES) $(addsuffix .o, $(ALL_FILES))
diff --git a/ubi-utils/tests/README.udev b/ubi-utils/tests/README.udev
deleted file mode 100644
index a4ff9c5..0000000
--- a/ubi-utils/tests/README.udev
+++ /dev/null
@@ -1,19 +0,0 @@
-There is a problem with udev: when a volume is created, there is a delay
-before corresponding /dev/ubiX_Y device node is created by udev, so some
-tests fail because of this. The symptom is error messages like
-"cannot open /dev/ubi0_0".
-
-One possible solution of this problem is to pre-create UBI device and volume
-nodes. there is even a script which may be used for this in ubi-utils/scripts/.
-But this is not enough because udev will still remove and re-create the nodes
-and tests will still fail. So you need to stop removing device nodes using
-the following udev rule:
-
- KERNEL=="ubi*_*", ACTION=="remove", OPTIONS+="ignore_device"
-
-In our Ubuntu distribution we put that to new file:
-/etc/udev/rules.d/50-local.rules
-
-Another possibility is to call udevsettle utility in libubi after the volume
-has been created See src/libubi.c - the call is there but is commented out.
-This is anyway an ugly hack, but works, although makes the tests slower.
diff --git a/ubi-utils/tests/common.c b/ubi-utils/tests/common.c
deleted file mode 100644
index cb63e77..0000000
--- a/ubi-utils/tests/common.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * The stuff which is common for many tests.
- */
-
-#include <stdarg.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#include "common.h"
-
-/**
- * __initial_check - check that common prerequisites which are required to run
- * tests.
- *
- * @test test name
- * @argc count of command-line arguments
- * @argv command-line arguments
- *
- * This function returns %0 if all is fine and test may be run and %-1 if not.
- */
-int __initial_check(const char *test, int argc, char * const argv[])
-{
- libubi_t libubi;
- struct ubi_dev_info dev_info;
-
- /*
- * All tests require UBI character device name as the first parameter,
- * check this.
- */
- if (argc < 2) {
- __err_msg(test, __FUNCTION__, __LINE__,
- "UBI character device node is not specified");
- return -1;
- }
-
- libubi = libubi_open();
- if (libubi == NULL) {
- __failed(test, __FUNCTION__, __LINE__, "libubi_open");
- return -1;
- }
-
- if (ubi_get_dev_info(libubi, argv[1], &dev_info)) {
- __failed(test, __FUNCTION__, __LINE__, "ubi_get_dev_info");
- goto close;
- }
-
- if (dev_info.avail_ebs < MIN_AVAIL_EBS) {
- __err_msg(test, __FUNCTION__, __LINE__,
- "insufficient available eraseblocks %d on UBI "
- "device, required %d",
- dev_info.avail_ebs, MIN_AVAIL_EBS);
- goto close;
- }
-
- if (dev_info.vol_count != 0) {
- __err_msg(test, __FUNCTION__, __LINE__,
- "device %s is not empty", argv[1]);
- goto close;
- }
-
- libubi_close(libubi);
- return 0;
-
-close:
- libubi_close(libubi);
- return -1;
-}
-
-/**
- * __err_msg - print a message to stderr.
- *
- * @test test name
- * @func function name
- * @line line number
- * @fmt format string
- */
-void __err_msg(const char *test, const char *func, int line,
- const char *fmt, ...)
-{
- va_list args;
-
- fprintf(stderr, "[%s] %s():%d: ", test, func, line);
- va_start(args, fmt);
- vfprintf(stderr, fmt, args);
- fprintf(stderr, "\n");
- va_end(args);
-}
-
-/**
- * __failed - print function fail message.
- *
- * @test test name
- * @func calling function name
- * @line line number
- * @failed failed function name
- */
-void __failed(const char *test, const char *func, int line,
- const char *failed)
-{
- fprintf(stderr, "[%s] %s():%d: function %s() failed with error %d (%s)\n",
- test, func, line, failed, errno, strerror(errno));
-}
-
-/**
- * __check_volume - check volume information.
- *
- * @libubi libubi descriptor
- * @dev_info UBI device description
- * @test test name
- * @func function name
- * @line line number
- * @vol_id ID of existing volume to check
- * @req volume creation request to compare with
- *
- * This function checks if a volume created using @req request has exactly the
- * requested characteristics. Returns 0 in case of success and %-1 in case of
- * error.
- */
-int __check_volume(libubi_t libubi, struct ubi_dev_info *dev_info,
- const char *test, const char *func, int line, int vol_id,
- const struct ubi_mkvol_request *req)
-{
- int ret;
- struct ubi_vol_info vol_info;
- int eb_size;
- long long rsvd_bytes;
-
- ret = ubi_get_vol_info1(libubi, dev_info->dev_num, vol_id, &vol_info);
- if (ret) {
- __failed(test, func, line, "ubi_get_vol_info");
- return -1;
- }
-
- if (req->alignment != vol_info.alignment) {
- __err_msg(test, func, line,
- "bad alignment: requested %d, got %d",
- req->alignment, vol_info.alignment);
- return -1;
- }
- if (req->vol_type != vol_info.type) {
- __err_msg(test, func, line, "bad type: requested %d, got %d",
- req->vol_type, vol_info.type);
- return -1;
- }
- if (strlen(req->name) != strlen(&vol_info.name[0]) ||
- strcmp(req->name, &vol_info.name[0]) != 0) {
- __err_msg(test, func, line,
- "bad name: requested \"%s\", got \"%s\"",
- req->name, &vol_info.name[0]);
- return -1;
- }
- if (vol_info.corrupted) {
- __err_msg(test, func, line, "corrupted new volume");
- return -1;
- }
-
- eb_size = dev_info->eb_size - (dev_info->eb_size % req->alignment);
- if (eb_size != vol_info.eb_size) {
- __err_msg(test, func, line,
- "bad usable LEB size %d, should be %d",
- vol_info.eb_size, eb_size);
- return -1;
- }
-
- rsvd_bytes = req->bytes;
- if (rsvd_bytes % eb_size)
- rsvd_bytes += eb_size - (rsvd_bytes % eb_size);
-
- if (rsvd_bytes != vol_info.rsvd_bytes) {
- __err_msg(test, func, line,
- "bad reserved bytes %lld, should be %lld",
- vol_info.rsvd_bytes, rsvd_bytes);
- return -1;
- }
-
- return 0;
-}
-
-/**
- * __check_vol_patt - check that volume contains certain data
- *
- * @libubi libubi descriptor
- * @dev_info UBI device description
- * @test test name
- * @func function name
- * @line line number
- * @node volume character device node
- * @byte data pattern to check
- *
- * This function returns %0 if the volume contains only @byte bytes, and %-1 if
- * not.
- */
-int __check_vol_patt(libubi_t libubi, struct ubi_dev_info *dev_info,
- const char *test, const char *func, int line,
- const char *node, uint8_t byte)
-{
- int ret, fd;
- long long bytes = 0;
- struct ubi_vol_info vol_info;
- unsigned char buf[512];
-
- fd = open(node, O_RDONLY);
- if (fd == -1) {
- __failed(test, func, line, "open");
- __err_msg(test, func, line, "cannot open \"%s\"\n", node);
- return -1;
- }
-
- ret = ubi_get_vol_info(libubi, node, &vol_info);
- if (ret) {
- __failed(test, func, line, "ubi_get_vol_info");
- goto close;
- }
-
- while (bytes < vol_info.data_bytes) {
- int i;
-
- memset(&buf[0], ~byte, 512);
- ret = read(fd, &buf[0], 512);
- if (ret == -1) {
- __failed(test, func, line, "read");
- __err_msg(test, func, line, "bytes = %lld, ret = %d",
- bytes, ret);
- goto close;
- }
-
- if (ret == 0 && bytes + ret < vol_info.data_bytes) {
- __err_msg(test, func, line,
- "EOF, but read only %lld bytes of %lld",
- bytes + ret, vol_info.data_bytes);
- goto close;
- }
-
- for (i = 0; i < ret; i++)
- if (buf[i] != byte) {
- __err_msg(test, func, line,
- "byte at %lld is not %#x but %#x",
- bytes + i, byte, (int)buf[i]);
- goto close;
- }
-
- bytes += ret;
- }
-
- close(fd);
- return 0;
-
-close:
- close(fd);
- return -1;
-}
-
-/**
- * __update_vol_patt - update volume using a certain byte pattern
- *
- * @libubi libubi descriptor
- * @dev_info UBI device description
- * @test test name
- * @func function name
- * @line line number
- * @node volume character device node
- * @byte data pattern to check
- *
- * This function returns %0 in case of success, and %-1 if in case of failure.
- */
-int __update_vol_patt(libubi_t libubi, const char *test, const char *func,
- int line, const char *node, long long bytes, uint8_t byte)
-{
- int ret, fd;
- long long written = 0;
- unsigned char buf[512];
-
- fd = open(node, O_RDWR);
- if (fd == -1) {
- __failed(test, func, line, "open");
- __err_msg(test, func, line, "cannot open \"%s\"\n", node);
- return -1;
- }
-
- if (ubi_update_start(libubi, fd, bytes)) {
- __failed(test, func, line, "ubi_update_start");
- __err_msg(test, func, line, "bytes = %lld", bytes);
- goto close;
- }
-
- memset(&buf[0], byte, 512);
-
- while (written != bytes) {
- ret = write(fd, &buf[0], 512);
- if (ret == -1) {
- __failed(test, func, line, "write");
- __err_msg(test, func, line, "written = %lld, ret = %d",
- written, ret);
- goto close;
- }
- written += ret;
-
- if (written > bytes) {
- __err_msg(test, func, line, "update length %lld bytes, "
- "but %lld bytes are already written",
- bytes, written);
- goto close;
- }
- }
-
- close(fd);
- return 0;
-
-close:
- close(fd);
- return -1;
-}
diff --git a/ubi-utils/tests/common.h b/ubi-utils/tests/common.h
deleted file mode 100644
index 3e8ada8..0000000
--- a/ubi-utils/tests/common.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * The stuff which is common for many tests.
- */
-
-#ifndef __COMMON_H__
-#define __COMMON_H__
-
-#include <string.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define UBI_VOLUME_PATTERN "/dev/ubi%d_%d"
-#define MIN_AVAIL_EBS 5
-#define PAGE_SIZE 4096
-
-#define min(a, b) ((a) < (b) ? (a) : (b))
-
-#define err_msg(fmt, ...) \
- __err_msg(TESTNAME, __FUNCTION__, __LINE__, fmt, ##__VA_ARGS__)
-
-#define failed(name) \
- __failed(TESTNAME, __FUNCTION__, __LINE__, name)
-
-#define initial_check(argc, argv) \
- __initial_check(TESTNAME, argc, argv)
-
-#define check_volume(vol_id, req) \
- __check_volume(libubi, &dev_info, TESTNAME, __FUNCTION__, \
- __LINE__, vol_id, req)
-
-#define check_vol_patt(node, byte) \
- __check_vol_patt(libubi, &dev_info, TESTNAME, __FUNCTION__, __LINE__, \
- node, byte)
-
-#define update_vol_patt(node, bytes, byte) \
- __update_vol_patt(libubi, TESTNAME, __FUNCTION__, __LINE__, \
- node, bytes, byte)
-
-#define check_failed(ret, error, func, fmt, ...) ({ \
- int __ret; \
- \
- if (!ret) { \
- err_msg("%s() returned success but should have failed", func); \
- err_msg(fmt, ##__VA_ARGS__); \
- __ret = -1; \
- } \
- if (errno != (error)) { \
- err_msg("%s failed with error %d (%s), expected %d (%s)", \
- func, errno, strerror(errno), error, strerror(error)); \
- err_msg(fmt, ##__VA_ARGS__); \
- __ret = -1; \
- } \
- __ret = 0; \
-})
-
-/* Alignments to test, @s is eraseblock size */
-#define ALIGNMENTS(s) \
- {3, 5, 27, 666, 512, 1024, 2048, (s)/2-3, (s)/2-2, (s)/2-1, (s)/2+1, \
- (s)/2+2, (s)/2+3, (s)/3-3, (s)/3-2, (s)/3-1, (s)/3+1, (s)/3+2, \
- (s)/3+3, (s)/4-3, (s)/4-2, (s)/4-1, (s)/4+1, (s)/4+2, (s)/4+3, \
- (s)/5-3, (s)/5-2, (s)/5-1, (s)/5+1, (s)/5+2, (s)/5+3, (s)-17, (s)-9, \
- (s)-8, (s)-6, (s)-4, (s)-1, (s)};
-
-extern void __err_msg(const char *test, const char *func, int line,
- const char *fmt, ...);
-void __failed(const char *test, const char *func, int line,
- const char *failed);
-int __initial_check(const char *test, int argc, char * const argv[]);
-int __check_volume(libubi_t libubi, struct ubi_dev_info *dev_info,
- const char *test, const char *func, int line, int vol_id,
- const struct ubi_mkvol_request *req);
-int __check_vol_patt(libubi_t libubi, struct ubi_dev_info *dev_info,
- const char *test, const char *func, int line,
- const char *node, uint8_t byte);
-int __update_vol_patt(libubi_t libubi, const char *test, const char *func,
- int line, const char *node, long long bytes,
- uint8_t byte);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* !__COMMON_H__ */
diff --git a/ubi-utils/tests/integ.c b/ubi-utils/tests/integ.c
deleted file mode 100644
index 4da7121..0000000
--- a/ubi-utils/tests/integ.c
+++ /dev/null
@@ -1,783 +0,0 @@
-#define _LARGEFILE64_SOURCE
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <string.h>
-#include <errno.h>
-
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-
-#include "libubi.h"
-
-struct erase_block_info;
-struct volume_info;
-struct ubi_device_info;
-
-struct write_info
-{
- struct write_info *next;
- struct erase_block_info *erase_block;
- int offset_within_block; /* Offset within erase block */
- off64_t offset; /* Offset within volume */
- int size;
- int random_seed;
-};
-
-struct erase_block_info
-{
- struct volume_info *volume;
- int block_number;
- off64_t offset; /* Offset within volume */
- off64_t top_of_data;
- int touched; /* Have we done anything at all with this erase block */
- int erased; /* This erased block is currently erased */
- struct write_info *writes;
-};
-
-struct volume_fd
-{
- struct volume_fd *next;
- struct volume_info *volume;
- int fd;
-};
-
-struct volume_info
-{
- struct volume_info *next;
- struct ubi_device_info *ubi_device;
- struct volume_fd *fds;
- struct erase_block_info *erase_blocks;
- const char *device_file_name;
- struct ubi_vol_info info;
-};
-
-struct ubi_device_info
-{
- struct volume_info *volumes;
- const char *device_file_name;
- struct ubi_dev_info info;
-};
-
-struct open_volume_fd
-{
- struct open_volume_fd *next;
- struct volume_fd *vol_fd;
-};
-
-#define MAX_UBI_DEVICES 64
-
-static libubi_t libubi;
-
-static struct ubi_info info;
-static struct ubi_device_info ubi_array[MAX_UBI_DEVICES];
-
-static uint64_t total_written = 0;
-static uint64_t total_space = 0;
-
-static struct open_volume_fd *open_volumes;
-static size_t open_volume_count = 0;
-
-static const char *ubi_module_load_string;
-
-static unsigned char *write_buffer = NULL;
-static unsigned char *read_buffer = NULL;
-
-static long long max_ebs_per_vol = 0; /* max number of ebs per vol (zero => no max) */
-
-static unsigned long next_seed = 1;
-
-static unsigned get_next_seed()
-{
- next_seed = next_seed * 1103515245 + 12345;
- return ((unsigned) (next_seed / 65536) % 32768);
-}
-
-static void error_exit(const char *msg)
-{
- int eno = errno;
- fprintf(stderr,"UBI Integrity Test Error: %s\n",msg);
- if (eno) {
- fprintf(stderr, "errno = %d\n", eno);
- fprintf(stderr, "strerror = %s\n", strerror(eno));
- }
- exit(1);
-}
-
-static void *allocate(size_t n)
-{
- void *p = malloc(n);
- if (!p)
- error_exit("Memory allocation failure");
- memset(p, 0, n);
- return p;
-}
-
-static unsigned get_random_number(unsigned n)
-{
- uint64_t r, b;
-
- if (n < 1)
- return 0;
- r = rand();
- r *= n;
- b = RAND_MAX;
- b += 1;
- r /= b;
- return r;
-}
-
-static struct volume_fd *open_volume(struct volume_info *vol)
-{
- struct volume_fd *s;
- struct open_volume_fd *ofd;
- int fd;
-
- if (vol->fds) {
- /* If already open dup it */
- fd = dup(vol->fds->fd);
- if (fd == -1)
- error_exit("Failed to dup volume device file des");
- } else {
- fd = open(vol->device_file_name, O_RDWR | O_LARGEFILE);
- if (fd == -1)
- error_exit("Failed to open volume device file");
- }
- s = allocate(sizeof(*s));
- s->fd = fd;
- s->volume = vol;
- s->next = vol->fds;
- vol->fds = s;
- /* Add to open volumes list */
- ofd = allocate(sizeof(*ofd));
- ofd->vol_fd = s;
- ofd->next = open_volumes;
- open_volumes = ofd;
- open_volume_count += 1;
- return 0;
-}
-
-static void close_volume(struct volume_fd *vol_fd)
-{
- struct volume_fd *vfd, *vfd_last;
- struct open_volume_fd *ofd, *ofd_last;
- int fd = vol_fd->fd;
-
- /* Remove from open volumes list */
- ofd_last = NULL;
- ofd = open_volumes;
- while (ofd) {
- if (ofd->vol_fd == vol_fd) {
- if (ofd_last)
- ofd_last->next = ofd->next;
- else
- open_volumes = ofd->next;
- free(ofd);
- open_volume_count -= 1;
- break;
- }
- ofd_last = ofd;
- ofd = ofd->next;
- }
- /* Remove from volume fd list */
- vfd_last = NULL;
- vfd = vol_fd->volume->fds;
- while (vfd) {
- if (vfd == vol_fd) {
- if (vfd_last)
- vfd_last->next = vfd->next;
- else
- vol_fd->volume->fds = vfd->next;
- free(vfd);
- break;
- }
- vfd_last = vfd;
- vfd = vfd->next;
- }
- /* Close volume device file */
- if (close(fd) == -1)
- error_exit("Failed to close volume file descriptor");
-}
-
-static void set_random_data(unsigned seed, unsigned char *buf, int size)
-{
- int i;
- unsigned r;
-
- r = rand();
- srand(seed);
- for (i = 0; i < size; ++i)
- buf[i] = rand();
- srand(r);
-}
-
-#if 0
-static void print_write_info(struct write_info *w)
-{
- printf("Offset: %lld Size:%d Seed:%u\n", w->offset, w->size, w->random_seed);
- fflush(stdout);
-}
-#endif
-
-static void check_erase_block(struct erase_block_info *erase_block, int fd)
-{
- struct write_info *w;
- off64_t gap_end;
- int eb_size = erase_block->volume->info.eb_size;
- ssize_t bytes_read;
-
- w = erase_block->writes;
- gap_end = erase_block->offset + eb_size;
- while (w) {
- if (w->offset + w->size < gap_end) {
- /* There is a gap. Check all 0xff */
- off64_t gap_start = w->offset + w->size;
- size_t size = gap_end - gap_start;
- if (lseek64(fd, gap_start, SEEK_SET) != gap_start)
- error_exit("lseek64 failed");
- memset(read_buffer, 0 , size);
- errno = 0;
- bytes_read = read(fd, read_buffer, size);
- if (bytes_read != size)
- error_exit("read failed in gap");
- while (size)
- if (read_buffer[--size] != 0xff) {
- fprintf(stderr, "block no. = %d\n" , erase_block->block_number);
- fprintf(stderr, "offset = %lld\n" , (long long) gap_start);
- fprintf(stderr, "size = %ld\n" , (long) bytes_read);
- error_exit("verify 0xff failed");
- }
- }
- if (lseek64(fd, w->offset, SEEK_SET) != w->offset)
- error_exit("lseek64 failed");
- memset(read_buffer, 0 , w->size);
- errno = 0;
- bytes_read = read(fd, read_buffer, w->size);
- if (bytes_read != w->size) {
- fprintf(stderr, "offset = %lld\n" , (long long) w->offset);
- fprintf(stderr, "size = %ld\n" , (long) w->size);
- fprintf(stderr, "bytes_read = %ld\n" , (long) bytes_read);
- error_exit("read failed");
- }
- set_random_data(w->random_seed, write_buffer, w->size);
- if (memcmp(read_buffer, write_buffer, w->size))
- error_exit("verify failed");
- gap_end = w->offset;
- w = w->next;
- }
- if (gap_end > erase_block->offset) {
- /* Check all 0xff */
- off64_t gap_start = erase_block->offset;
- size_t size = gap_end - gap_start;
- if (lseek64(fd, gap_start, SEEK_SET) != gap_start)
- error_exit("lseek64 failed");
- memset(read_buffer, 0 , size);
- errno = 0;
- bytes_read = read(fd, read_buffer, size);
- if (bytes_read != size)
- error_exit("read failed in gap");
- while (size)
- if (read_buffer[--size] != 0xff) {
- fprintf(stderr, "block no. = %d\n" , erase_block->block_number);
- fprintf(stderr, "offset = %lld\n" , (long long) gap_start);
- fprintf(stderr, "size = %ld\n" , (long) bytes_read);
- error_exit("verify 0xff failed!");
- }
- }
-}
-
-static int write_to_erase_block(struct erase_block_info *erase_block, int fd)
-{
- int page_size = erase_block->volume->ubi_device->info.min_io_size;
- int eb_size = erase_block->volume->info.eb_size;
- int next_offset = 0;
- int space, size;
- off64_t offset;
- unsigned seed;
- struct write_info *w;
-
- if (erase_block->writes)
- next_offset = erase_block->writes->offset_within_block + erase_block->writes->size;
- space = eb_size - next_offset;
- if (space <= 0)
- return 0; /* No space */
- if (!get_random_number(10)) {
- /* 1 time in 10 leave a gap */
- next_offset += get_random_number(space);
- next_offset = (next_offset / page_size) * page_size;
- space = eb_size - next_offset;
- }
- if (get_random_number(2))
- size = 1 * page_size;
- else if (get_random_number(2))
- size = 2 * page_size;
- else if (get_random_number(2))
- size = 3 * page_size;
- else if (get_random_number(2))
- size = 4 * page_size;
- else {
- if (get_random_number(4))
- size = get_random_number(space);
- else
- size = space;
- size = (size / page_size) * page_size;
- }
- if (size == 0 || size > space)
- size = page_size;
- if (next_offset + size > eb_size)
- error_exit("internal error");
- offset = erase_block->offset + next_offset;
- if (offset < erase_block->top_of_data)
- error_exit("internal error!");
- if (lseek64(fd, offset, SEEK_SET) != offset)
- error_exit("lseek64 failed");
- /* Do write */
- seed = get_next_seed();
- if (!seed)
- seed = 1;
- set_random_data(seed, write_buffer, size);
- if (write(fd, write_buffer, size) != size)
- error_exit("write failed");
- erase_block->top_of_data = offset + size;
- /* Make write info and add to eb */
- w = allocate(sizeof(*w));
- w->offset_within_block = next_offset;
- w->offset = offset;
- w->size = size;
- w->random_seed = seed;
- w->next = erase_block->writes;
- erase_block->writes = w;
- erase_block->touched = 1;
- erase_block->erased = 0;
- total_written += size;
- return 1;
-}
-
-static void erase_erase_block(struct erase_block_info *erase_block, int fd)
-{
- struct write_info *w;
- uint32_t eb_no;
- int res;
-
- eb_no = erase_block->block_number;
- res = ioctl(fd, UBI_IOCEBER, &eb_no);
- if (res)
- error_exit("Failed to erase an erase block");
- /* Remove writes from this eb */
- while (erase_block->writes) {
- w = erase_block->writes;
- erase_block->writes = erase_block->writes->next;
- free(w);
- }
- erase_block->erased = 1;
- erase_block->touched = 1;
- erase_block->top_of_data = erase_block->offset;
-}
-
-static void operate_on_erase_block(struct erase_block_info *erase_block, int fd)
-{
- /*
- Possible operations:
- read from it and verify
- write to it
- erase it
- */
- int work_done = 1;
- static int no_work_done_count = 0;
-
- if (!get_random_number(10) && no_work_done_count <= 5) {
- check_erase_block(erase_block, fd);
- work_done = 0;
- } else if (get_random_number(100)) {
- if (!write_to_erase_block(erase_block, fd)) {
- /* The erase block was full */
- if (get_random_number(2) || no_work_done_count > 5)
- erase_erase_block(erase_block, fd);
- else
- work_done = 0;
- }
- } else
- erase_erase_block(erase_block, fd);
- if (work_done)
- no_work_done_count = 0;
- else
- no_work_done_count += 1;
-}
-
-static void operate_on_open_volume(struct volume_fd *vol_fd)
-{
- /*
- Possible operations:
- operate on an erase block
- close volume
- */
- if (get_random_number(100) == 0)
- close_volume(vol_fd);
- else {
- /* Pick an erase block at random */
- int eb_no = get_random_number(vol_fd->volume->info.rsvd_ebs);
- operate_on_erase_block(&vol_fd->volume->erase_blocks[eb_no], vol_fd->fd);
- }
-}
-
-static void operate_on_volume(struct volume_info *vol)
-{
- /*
- Possible operations:
- open it
- resize it (must close fd's first) <- TODO
- delete it (must close fd's first) <- TODO
- */
- open_volume(vol);
-}
-
-static int ubi_major(const char *device_file_name)
-{
- struct stat buf;
- static int maj = 0;
-
- if (maj)
- return maj;
- if (stat(device_file_name, &buf) == -1)
- error_exit("Failed to stat ubi device file");
- maj = major(buf.st_rdev);
- return maj;
-}
-
-static void operate_on_ubi_device(struct ubi_device_info *ubi_device)
-{
- /*
- TODO:
- Possible operations:
- create a new volume
- operate on existing volume
- */
- /*
- Simplified operation (i.e. only have 1 volume):
- If there are no volumes create 1 volumne
- Then operate on the volume
- */
- if (ubi_device->info.vol_count == 0) {
- /* Create the one-and-only volume we will use */
- char dev_name[1024];
- int i, n, maj, fd;
- struct volume_info *s;
- struct ubi_mkvol_request req;
-
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.alignment = 1; /* TODO: What is this? */
- req.bytes = ubi_device->info.eb_size * max_ebs_per_vol;
- if (req.bytes == 0 || req.bytes > ubi_device->info.avail_bytes)
- req.bytes = ubi_device->info.avail_bytes;
- req.vol_type = UBI_DYNAMIC_VOLUME;
- req.name = "integ-test-vol";
- if (ubi_mkvol(libubi, ubi_device->device_file_name, &req))
- error_exit("ubi_mkvol failed");
- s = allocate(sizeof(*s));
- s->ubi_device = ubi_device;
- if (ubi_get_vol_info1(libubi, ubi_device->info.dev_num, req.vol_id, &s->info))
- error_exit("ubi_get_vol_info failed");
- n = s->info.rsvd_ebs;
- s->erase_blocks = allocate(sizeof(struct erase_block_info) * n);
- for (i = 0; i < n; ++i) {
- s->erase_blocks[i].volume = s;
- s->erase_blocks[i].block_number = i;
- s->erase_blocks[i].offset = i * (off64_t) s->info.eb_size;
- s->erase_blocks[i].top_of_data = s->erase_blocks[i].offset;
- }
- /* FIXME: Correctly get device file name */
- sprintf(dev_name, "%s_%d", ubi_device->device_file_name, req.vol_id);
- s->device_file_name = strdup(dev_name);
- ubi_device->volumes = s;
- ubi_device->info.vol_count += 1;
- sleep(1);
- fd = open(s->device_file_name, O_RDONLY);
- if (fd == -1) {
- /* FIXME: Correctly make node */
- maj = ubi_major(ubi_device->device_file_name);
- sprintf(dev_name, "mknod %s c %d %d", s->device_file_name, maj, req.vol_id + 1);
- system(dev_name);
- } else if (close(fd) == -1)
- error_exit("Failed to close volume device file");
- }
- operate_on_volume(ubi_device->volumes);
-}
-
-static void do_an_operation(void)
-{
- int too_few = (open_volume_count < info.dev_count * 3);
- int too_many = (open_volume_count > info.dev_count * 5);
-
- if (too_many || (!too_few && get_random_number(1000) > 0)) {
- /* Operate on an open volume */
- size_t pos;
- struct open_volume_fd *ofd;
- pos = get_random_number(open_volume_count);
- for (ofd = open_volumes; pos && ofd && ofd->next; --pos)
- ofd = ofd->next;
- operate_on_open_volume(ofd->vol_fd);
- } else if (info.dev_count > 0) {
- /* Operate on a ubi device */
- size_t ubi_pos = 0;
- if (info.dev_count > 1)
- ubi_pos = get_random_number(info.dev_count - 1);
- operate_on_ubi_device(&ubi_array[ubi_pos]);
- } else
- error_exit("Internal error");
-}
-
-static void get_ubi_devices_info(void)
-{
- int i, ubi_pos = 0;
- char dev_name[1024];
- size_t buf_size = 1024 * 128;
-
- if (ubi_get_info(libubi, &info))
- error_exit("ubi_get_info failed");
- if (info.dev_count > MAX_UBI_DEVICES)
- error_exit("Too many ubi devices");
- for (i = info.lowest_dev_num; i <= info.highest_dev_num; ++i) {
- struct ubi_device_info *s;
- s = &ubi_array[ubi_pos++];
- if (ubi_get_dev_info1(libubi, i, &s->info))
- error_exit("ubi_get_dev_info1 failed");
- if (s->info.vol_count)
- error_exit("There are existing volumes");
- /* FIXME: Correctly get device file name */
- sprintf(dev_name, "/dev/ubi%d", i);
- s->device_file_name = strdup(dev_name);
- if (buf_size < s->info.eb_size)
- buf_size = s->info.eb_size;
- if (max_ebs_per_vol && s->info.eb_size * max_ebs_per_vol < s->info.avail_bytes)
- total_space += s->info.eb_size * max_ebs_per_vol;
- else
- total_space += s->info.avail_bytes;
- }
- write_buffer = allocate(buf_size);
- read_buffer = allocate(buf_size);
-}
-
-static void load_ubi(void)
-{
- system("rmmod ubi");
- if (system(ubi_module_load_string) != 0)
- error_exit("Failed to load UBI module");
- sleep(1);
-}
-
-static void do_some_operations(void)
-{
- unsigned i = 0;
- total_written = 0;
- printf("Total space: %llu\n", (unsigned long long) total_space);
- while (total_written < total_space * 3) {
- do_an_operation();
- if (i++ % 10000 == 0)
- printf("Total written: %llu\n", (unsigned long long) total_written);
- }
- printf("Total written: %llu\n", (unsigned long long) total_written);
-}
-
-static void reload_ubi(void)
-{
- /* Remove module */
- if (system("rmmod ubi") != 0)
- error_exit("Failed to remove UBI module");
- /* Install module */
- if (system(ubi_module_load_string) != 0)
- error_exit("Failed to load UBI module");
- sleep(1);
-}
-
-static void check_volume(struct volume_info *vol)
-{
- struct erase_block_info *eb = vol->erase_blocks;
- int pos;
- int fd;
-
- fd = open(vol->device_file_name, O_RDWR | O_LARGEFILE);
- if (fd == -1)
- error_exit("Failed to open volume device file");
- for (pos = 0; pos < vol->info.rsvd_ebs; ++pos)
- check_erase_block(eb++, fd);
- if (close(fd) == -1)
- error_exit("Failed to close volume device file");
-}
-
-static void check_ubi_device(struct ubi_device_info *ubi_device)
-{
- struct volume_info *vol;
-
- vol = ubi_device->volumes;
- while (vol) {
- check_volume(vol);
- vol = vol->next;
- }
-}
-
-static void check_ubi(void)
-{
- int i;
-
- for (i = 0; i < info.dev_count; ++i)
- check_ubi_device(&ubi_array[i]);
-}
-
-static int is_all_digits(const char *s)
-{
- const char *digits = "0123456789";
- if (!s || !*s)
- return 0;
- for (;*s;++s)
- if (!strchr(digits,*s))
- return 0;
- return 1;
-}
-
-static int get_short_arg(int *pos,const char *name,long long *result,int argc,char *argv[])
-{
- const char *p = NULL;
- int i = *pos;
- size_t n = strlen(name);
-
- if (strlen(argv[i]) > n)
- p = argv[i] + n;
- else if (++i < argc)
- p = argv[i];
- if (!is_all_digits(p))
- return 1;
- *result = atoll(p);
- *pos = i;
- return 0;
-}
-
-static int get_long_arg(int *pos,const char *name,long long *result,int argc,char *argv[])
-{
- const char *p = NULL;
- int i = *pos;
- size_t n = strlen(name);
-
- if (strlen(argv[i]) > n)
- p = argv[i] + n;
- else if (++i < argc)
- p = argv[i];
- if (p && *p == '=') {
- p += 1;
- if (!*p && ++i < argc)
- p = argv[i];
- }
- if (!is_all_digits(p))
- return 1;
- *result = atoll(p);
- *pos = i;
- return 0;
-}
-
-static int remove_all_volumes(void)
-{
- int i;
-
- for (i = 0; i < info.dev_count; ++i) {
- struct ubi_device_info *ubi_device = &ubi_array[i];
- struct volume_info *vol;
- vol = ubi_device->volumes;
- while (vol) {
- int res = ubi_rmvol(libubi,
- ubi_device->device_file_name,
- vol->info.vol_id);
- if (res)
- return res;
- vol = vol->next;
- }
- }
- return 0;
-}
-
-int main(int argc,char *argv[])
-{
- int i;
- long long r, repeat = 1;
- int initial_seed = 1, args_ok = 1;
-
- printf("UBI Integrity Test\n");
-
- /* Get arguments */
- ubi_module_load_string = 0;
- for (i = 1; i < argc; ++i) {
- if (strncmp(argv[i], "-h", 2) == 0)
- args_ok = 0;
- else if (strncmp(argv[i], "--help", 6) == 0)
- args_ok = 0;
- else if (strncmp(argv[i], "-n", 2) == 0) {
- if (get_short_arg(&i, "-n", &repeat, argc, argv))
- args_ok = 0;
- } else if (strncmp(argv[i], "--repeat", 8) == 0) {
- if (get_long_arg(&i, "--repeat", &repeat, argc, argv))
- args_ok = 0;
- } else if (strncmp(argv[i], "-m", 2) == 0) {
- if (get_short_arg(&i,"-m", &max_ebs_per_vol, argc, argv))
- args_ok = 0;
- } else if (strncmp(argv[i], "--maxebs", 8) == 0) {
- if (get_long_arg(&i, "--maxebs", &max_ebs_per_vol, argc, argv))
- args_ok = 0;
- } else if (!ubi_module_load_string)
- ubi_module_load_string = argv[i];
- else
- args_ok = 0;
- }
- if (!args_ok || !ubi_module_load_string) {
- fprintf(stderr, "Usage is: ubi_integ [<options>] <UBI Module load command>\n");
- fprintf(stderr, " Options: \n");
- fprintf(stderr, " -h, --help Help\n");
- fprintf(stderr, " -n arg, --repeat=arg Repeat test arg times\n");
- fprintf(stderr, " -m arg, --maxebs=arg Max no. of erase blocks\n");
- return 1;
- }
-
- initial_seed = getpid();
- printf("Initial seed = %u\n", (unsigned) initial_seed);
- next_seed = initial_seed;
- srand(initial_seed);
- load_ubi();
-
- libubi = libubi_open();
- if (!libubi)
- error_exit("Failed to open libubi");
-
- get_ubi_devices_info();
-
- r = 0;
- while (repeat == 0 || r++ < repeat) {
- printf("Cycle %lld\n", r);
- do_some_operations();
-
- /* Close all volumes */
- while (open_volumes)
- close_volume(open_volumes->vol_fd);
-
- check_ubi();
-
- libubi_close(libubi);
-
- reload_ubi();
-
- libubi = libubi_open();
- if (!libubi)
- error_exit("Failed to open libubi");
-
- check_ubi();
- }
-
- if (remove_all_volumes())
- error_exit("Failed to remove all volumes");
-
- libubi_close(libubi);
-
- printf("UBI Integrity Test completed ok\n");
- return 0;
-}
diff --git a/ubi-utils/tests/io_basic.c b/ubi-utils/tests/io_basic.c
deleted file mode 100644
index 2e8809a..0000000
--- a/ubi-utils/tests/io_basic.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test basic UBI volume I/O capabilities.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "io_basic"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_basic(int type);
-static int test_aligned(int type);
-
-int main(int argc, char * const argv[])
-{
- if (initial_check(argc, argv))
- return 1;
-
- node = argv[1];
-
- libubi = libubi_open();
- if (libubi == NULL) {
- failed("libubi_open");
- return 1;
- }
-
- if (ubi_get_dev_info(libubi, node, &dev_info)) {
- failed("ubi_get_dev_info");
- goto close;
- }
-
- if (test_basic(UBI_DYNAMIC_VOLUME))
- goto close;
- if (test_basic(UBI_STATIC_VOLUME))
- goto close;
- if (test_aligned(UBI_DYNAMIC_VOLUME))
- goto close;
- if (test_aligned(UBI_STATIC_VOLUME))
- goto close;
-
- libubi_close(libubi);
- return 0;
-
-close:
- libubi_close(libubi);
- return 1;
-}
-
-/**
- * test_basic - check basic volume read and update capabilities.
- *
- * @type volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_basic(int type)
-{
- struct ubi_mkvol_request req;
- const char *name = TESTNAME ":test_basic()";
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.alignment = 1;
- req.bytes = dev_info.avail_bytes;
- req.vol_type = type;
- req.name = name;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num, req.vol_id);
-
- /* Make sure newly created volume contains only 0xFF bytes */
- if (check_vol_patt(&vol_node[0], 0xFF))
- goto remove;
-
- /* Write 0xA5 bytes to the volume */
- if (update_vol_patt(&vol_node[0], dev_info.avail_bytes, 0xA5))
- goto remove;
- if (check_vol_patt(&vol_node[0], 0xA5))
- goto remove;
-
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
-
- return 0;
-
-remove:
- ubi_rmvol(libubi, node, req.vol_id);
- return -1;
-}
-
-/**
- * test_aligned - test volume alignment feature.
- *
- * @type volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_aligned(int type)
-{
- int i, ebsz;
- struct ubi_mkvol_request req;
- const char *name = TESTNAME ":test_aligned()";
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
- int alignments[] = ALIGNMENTS(dev_info.eb_size);
-
- req.vol_type = type;
- req.name = name;
-
- for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
- req.vol_id = UBI_VOL_NUM_AUTO;
-
- req.alignment = alignments[i];
- req.alignment -= req.alignment % dev_info.min_io_size;
- if (req.alignment == 0)
- req.alignment = dev_info.min_io_size;
-
- ebsz = dev_info.eb_size - dev_info.eb_size % req.alignment;
- req.bytes = MIN_AVAIL_EBS * ebsz;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num, req.vol_id);
-
- /* Make sure newly created volume contains only 0xFF bytes */
- if (check_vol_patt(&vol_node[0], 0xFF))
- goto remove;
-
- /* Write 0xA5 bytes to the volume */
- if (update_vol_patt(&vol_node[0], req.bytes, 0xA5))
- goto remove;
- if (check_vol_patt(&vol_node[0], 0xA5))
- goto remove;
-
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
- }
-
- return 0;
-
-remove:
- ubi_rmvol(libubi, node, req.vol_id);
- return -1;
-}
diff --git a/ubi-utils/tests/io_paral.c b/ubi-utils/tests/io_paral.c
deleted file mode 100644
index 4857bf8..0000000
--- a/ubi-utils/tests/io_paral.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * This test does a lot of I/O to volumes in parallel.
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <pthread.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "io_paral"
-#include "common.h"
-
-#define THREADS_NUM 3
-#define ITERATIONS 100
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-static int iterations = ITERATIONS;
-int total_bytes;
-
-static void * the_thread(void *ptr);
-
-static long long memory_limit(void)
-{
- long long result = 0;
- FILE *f;
-
- f = fopen("/proc/meminfo", "r");
- if (!f)
- return 0;
- fscanf(f, "%*s %lld", &result);
- fclose(f);
- return result * 1024 / 4;
-}
-
-int main(int argc, char * const argv[])
-{
- int i, ret;
- pthread_t threads[THREADS_NUM];
- struct ubi_mkvol_request req;
- long long mem_limit;
-
- if (initial_check(argc, argv))
- return 1;
-
- node = argv[1];
-
- libubi = libubi_open();
- if (libubi == NULL) {
- failed("libubi_open");
- return 1;
- }
-
- if (ubi_get_dev_info(libubi, node, &dev_info)) {
- failed("ubi_get_dev_info");
- goto close;
- }
-
- req.alignment = 1;
- mem_limit = memory_limit();
- if (mem_limit && mem_limit < dev_info.avail_bytes)
- total_bytes = req.bytes =
- (mem_limit / dev_info.eb_size / THREADS_NUM)
- * dev_info.eb_size;
- else
- total_bytes = req.bytes =
- ((dev_info.avail_ebs - 3) / THREADS_NUM)
- * dev_info.eb_size;
- for (i = 0; i < THREADS_NUM; i++) {
- char name[100];
-
- req.vol_id = i;
- sprintf(&name[0], TESTNAME":%d", i);
- req.name = &name[0];
- req.vol_type = (i & 1) ? UBI_STATIC_VOLUME : UBI_DYNAMIC_VOLUME;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- goto remove;
- }
- }
-
- /* Create one volume with static data to make WL work more */
- req.vol_id = THREADS_NUM;
- req.name = TESTNAME ":static";
- req.vol_type = UBI_DYNAMIC_VOLUME;
- req.bytes = 3*dev_info.eb_size;
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- goto remove;
- }
-
- for (i = 0; i < THREADS_NUM; i++) {
- ret = pthread_create(&threads[i], NULL, &the_thread, (void*)i);
- if (ret) {
- failed("pthread_create");
- goto remove;
- }
- }
-
- for (i = 0; i < THREADS_NUM; i++)
- pthread_join(threads[i], NULL);
-
- for (i = 0; i <= THREADS_NUM; i++) {
- if (ubi_rmvol(libubi, node, i)) {
- failed("ubi_rmvol");
- goto remove;
- }
- }
-
- libubi_close(libubi);
- return 0;
-
-remove:
- for (i = 0; i <= THREADS_NUM; i++)
- ubi_rmvol(libubi, node, i);
-
-close:
- libubi_close(libubi);
- return 1;
-}
-
-/**
- * the_thread - the testing thread.
- *
- * @ptr thread number
- */
-static void * the_thread(void *ptr)
-{
- int fd, iter = iterations, vol_id = (int)ptr;
- unsigned char *wbuf, *rbuf;
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-
- wbuf = malloc(total_bytes);
- rbuf = malloc(total_bytes);
- if (!wbuf || !rbuf) {
- failed("malloc");
- goto free;
- }
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num, vol_id);
-
- while (iter--) {
- int i, ret, written = 0, rd = 0;
- int bytes = (random() % (total_bytes - 1)) + 1;
-
- fd = open(vol_node, O_RDWR);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", node);
- goto free;
- }
-
- for (i = 0; i < bytes; i++)
- wbuf[i] = random() % 255;
- memset(rbuf, '\0', bytes);
-
- do {
- ret = ubi_update_start(libubi, fd, bytes);
- if (ret && errno != EBUSY) {
- failed("ubi_update_start");
- err_msg("vol_id %d", vol_id);
- goto close;
- }
- } while (ret);
-
- while (written < bytes) {
- int to_write = random() % (bytes - written);
-
- if (to_write == 0)
- to_write = 1;
-
- ret = write(fd, wbuf, to_write);
- if (ret != to_write) {
- failed("write");
- err_msg("failed to write %d bytes at offset %d "
- "of volume %d", to_write, written,
- vol_id);
- err_msg("update: %d bytes", bytes);
- goto close;
- }
-
- written += to_write;
- }
-
- close(fd);
-
- fd = open(vol_node, O_RDONLY);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", node);
- goto free;
- }
-
- /* read data back and check */
- while (rd < bytes) {
- int to_read = random() % (bytes - rd);
-
- if (to_read == 0)
- to_read = 1;
-
- ret = read(fd, rbuf, to_read);
- if (ret != to_read) {
- failed("read");
- err_msg("failed to read %d bytes at offset %d "
- "of volume %d", to_read, rd, vol_id);
- goto close;
- }
-
- rd += to_read;
- }
-
- close(fd);
-
- }
-
- free(wbuf);
- free(rbuf);
- return NULL;
-
-close:
- close(fd);
-free:
- free(wbuf);
- free(rbuf);
- return NULL;
-}
diff --git a/ubi-utils/tests/io_read.c b/ubi-utils/tests/io_read.c
deleted file mode 100644
index c5d1da7..0000000
--- a/ubi-utils/tests/io_read.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test UBI volume read.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "io_basic"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_static(void);
-static int test_read(int type);
-
-int main(int argc, char * const argv[])
-{
- if (initial_check(argc, argv))
- return 1;
-
- node = argv[1];
-
- libubi = libubi_open();
- if (libubi == NULL) {
- failed("libubi_open");
- return 1;
- }
-
- if (ubi_get_dev_info(libubi, node, &dev_info)) {
- failed("ubi_get_dev_info");
- goto close;
- }
-
- if (test_static())
- goto close;
- if (test_read(UBI_DYNAMIC_VOLUME))
- goto close;
- if (test_read(UBI_STATIC_VOLUME))
- goto close;
-
- libubi_close(libubi);
- return 0;
-
-close:
- libubi_close(libubi);
- return 1;
-}
-
-/**
- * test_static - test static volume-specific features.
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_static(void)
-{
- struct ubi_mkvol_request req;
- const char *name = TESTNAME ":io_basic()";
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
- struct ubi_vol_info vol_info;
- int fd, ret;
- char buf[20];
-
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.alignment = 1;
- req.bytes = dev_info.avail_bytes;
- req.vol_type = UBI_STATIC_VOLUME;
- req.name = name;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num, req.vol_id);
-
- fd = open(vol_node, O_RDWR);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", node);
- goto remove;
- }
-
- if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
- failed("ubi_get_vol_info");
- goto close;
- }
-
- /* Make sure new static volume contains no data */
- if (vol_info.data_bytes != 0) {
- err_msg("data_bytes = %lld, not zero", vol_info.data_bytes);
- goto close;
- }
-
- /* Ensure read returns EOF */
- ret = read(fd, &buf[0], 1);
- if (ret < 0) {
- failed("read");
- goto close;
- }
- if (ret != 0) {
- err_msg("read data from free static volume");
- goto close;
- }
-
- if (ubi_update_start(libubi, fd, 10)) {
- failed("ubi_update_start");
- goto close;
- }
-
- ret = write(fd, &buf[0], 10);
- if (ret < 0) {
- failed("write");
- goto close;
- }
- if (ret != 10) {
- err_msg("written %d bytes", ret);
- goto close;
- }
-
- if (lseek(fd, 0, SEEK_SET) != 0) {
- failed("seek");
- goto close;
- }
- ret = read(fd, &buf[0], 20);
- if (ret < 0) {
- failed("read");
- goto close;
- }
- if (ret != 10) {
- err_msg("read %d bytes", ret);
- goto close;
- }
-
- close(fd);
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
-
- return 0;
-
-close:
- close(fd);
-remove:
- ubi_rmvol(libubi, node, req.vol_id);
- return -1;
-}
-
-static int test_read1(struct ubi_vol_info *vol_info);
-
-/**
- * test_read - test UBI volume reading from different offsets.
- *
- * @type volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_read(int type)
-{
- const char *name = TESTNAME ":test_read()";
- int alignments[] = ALIGNMENTS(dev_info.eb_size);
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
- struct ubi_mkvol_request req;
- int i;
-
- for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
- int eb_size;
- struct ubi_vol_info vol_info;
-
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.vol_type = type;
- req.name = name;
-
- req.alignment = alignments[i];
- req.alignment -= req.alignment % dev_info.min_io_size;
- if (req.alignment == 0)
- req.alignment = dev_info.min_io_size;
-
- eb_size = dev_info.eb_size - dev_info.eb_size % req.alignment;
- req.bytes = MIN_AVAIL_EBS * eb_size;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
- req.vol_id);
-
- if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
- failed("ubi_get_vol_info");
- goto remove;
- }
-
- if (test_read1(&vol_info)) {
- err_msg("alignment = %d", req.alignment);
- goto remove;
- }
-
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
- }
-
- return 0;
-
-remove:
- ubi_rmvol(libubi, node, req.vol_id);
- return -1;
-}
-
-static int test_read2(const struct ubi_vol_info *vol_info, int len);
-
-static int fd;
-
-/* Data lengthes to test, @io - minimal I/O unit size, @s - eraseblock size */
-#define LENGTHES(io, s) \
- {1, (io), (io)+1, 2*(io), 3*(io)-1, 3*(io), \
- PAGE_SIZE-1, PAGE_SIZE-(io), 2*PAGE_SIZE, 2*PAGE_SIZE-(io), \
- (s)/2-1, (s)/2, (s)/2+1, (s)-1, (s), (s)+1, 2*(s)-(io), 2*(s), \
- 2*(s)+(io), 3*(s), 3*(s)+(io)};
-
-/*
- * A helper function for test_read().
- */
-static int test_read1(struct ubi_vol_info *vol_info)
-{
- int i, written = 0;
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
- int lengthes[] = LENGTHES(dev_info.min_io_size, vol_info->eb_size);
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
- vol_info->vol_id);
-
- fd = open(vol_node, O_RDWR);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", node);
- return -1;
- }
-
- /* Write some pattern to the volume */
- if (ubi_update_start(libubi, fd, vol_info->rsvd_bytes)) {
- failed("ubi_update_start");
- err_msg("bytes = %lld", vol_info->rsvd_bytes);
- goto close;
- }
-
- while (written < vol_info->rsvd_bytes) {
- int i, ret;
- unsigned char buf[512];
-
- for (i = 0; i < 512; i++)
- buf[i] = (unsigned char)(written + i);
-
- ret = write(fd, &buf[0], 512);
- if (ret == -1) {
- failed("write");
- err_msg("written = %d, ret = %d", written, ret);
- goto close;
- }
- written += ret;
- }
-
- close(fd);
-
- if (ubi_get_vol_info(libubi, vol_node, vol_info)) {
- failed("ubi_get_vol_info");
- return -1;
- }
-
- fd = open(vol_node, O_RDONLY);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", node);
- return -1;
- }
-
- for (i = 0; i < sizeof(lengthes)/sizeof(int); i++) {
- if (test_read2(vol_info, lengthes[i])) {
- err_msg("length = %d", lengthes[i]);
- goto close;
- }
- }
-
- close(fd);
- return 0;
-
-close:
- close(fd);
- return -1;
-}
-
-static int test_read3(const struct ubi_vol_info *vol_info, int len, off_t off);
-
-/*
- * Offsets to test, @io - minimal I/O unit size, @s - eraseblock size, @sz -
- * volume size.
- */
-#define OFFSETS(io, s, sz) \
- {0, (io)-1, (io), (io)+1, 2*(io)-1, 2*(io), 3*(io)-1, 3*(io), \
- PAGE_SIZE-1, PAGE_SIZE-(io), 2*PAGE_SIZE, 2*PAGE_SIZE-(io), \
- (s)/2-1, (s)/2, (s)/2+1, (s)-1, (s), (s)+1, 2*(s)-(io), 2*(s), \
- 2*(s)+(io), 3*(s), (sz)-(s)-1, (sz)-(io)-1, (sz)-PAGE_SIZE-1};
-
-/*
- * A helper function for test_read1().
- */
-static int test_read2(const struct ubi_vol_info *vol_info, int len)
-{
- int i;
- off_t offsets[] = OFFSETS(dev_info.min_io_size, vol_info->eb_size,
- vol_info->data_bytes);
-
- for (i = 0; i < sizeof(offsets)/sizeof(off_t); i++) {
- if (test_read3(vol_info, len, offsets[i])) {
- err_msg("offset = %d", offsets[i]);
- return -1;
- }
- }
-
- return 0;
-}
-
-/*
- * A helper function for test_read2().
- */
-static int test_read3(const struct ubi_vol_info *vol_info, int len, off_t off)
-{
- int i, len1;
- unsigned char ck_buf[len], buf[len];
- off_t new_off;
-
- if (off + len > vol_info->data_bytes)
- len1 = vol_info->data_bytes - off;
- else
- len1 = len;
-
- if (lseek(fd, off, SEEK_SET) != off) {
- failed("seek");
- err_msg("len = %d", len);
- return -1;
- }
- if (read(fd, &buf[0], len) != len1) {
- failed("read");
- err_msg("len = %d", len);
- return -1;
- }
-
- new_off = lseek(fd, 0, SEEK_CUR);
- if (new_off != off + len1) {
- if (new_off == -1)
- failed("lseek");
- else
- err_msg("read %d bytes from %lld, but resulting "
- "offset is %lld", len1, (long long) off, (long long) new_off);
- return -1;
- }
-
- for (i = 0; i < len1; i++)
- ck_buf[i] = (unsigned char)(off + i);
-
- if (memcmp(&buf[0], &ck_buf[0], len1)) {
- err_msg("incorrect data read from offset %lld",
- (long long)off);
- err_msg("len = %d", len);
- return -1;
- }
-
- return 0;
-}
diff --git a/ubi-utils/tests/io_update.c b/ubi-utils/tests/io_update.c
deleted file mode 100644
index 2e3422a..0000000
--- a/ubi-utils/tests/io_update.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test UBI volume update.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "io_update"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_update(int type);
-static int test_update_ff(void);
-
-int main(int argc, char * const argv[])
-{
- if (initial_check(argc, argv))
- return 1;
-
- node = argv[1];
-
- libubi = libubi_open();
- if (libubi == NULL) {
- failed("libubi_open");
- return 1;
- }
-
- if (ubi_get_dev_info(libubi, node, &dev_info)) {
- failed("ubi_get_dev_info");
- goto close;
- }
-
- if (test_update(UBI_DYNAMIC_VOLUME))
- goto close;
- if (test_update(UBI_STATIC_VOLUME))
- goto close;
- if (test_update_ff())
- goto close;
-
- libubi_close(libubi);
- return 0;
-
-close:
- libubi_close(libubi);
- return 1;
-}
-
-static int test_update1(struct ubi_vol_info *vol_info);
-
-/**
- * test_update - check volume update capabilities.
- *
- * @type volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * This function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_update(int type)
-{
- struct ubi_mkvol_request req;
- const char *name = TESTNAME ":io_update()";
- int alignments[] = ALIGNMENTS(dev_info.eb_size);
- struct ubi_vol_info vol_info;
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
- int i;
-
- for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
- int eb_size;
-
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.vol_type = type;
- req.name = name;
-
- req.alignment = alignments[i];
- req.alignment -= req.alignment % dev_info.min_io_size;
- if (req.alignment == 0)
- req.alignment = dev_info.min_io_size;
-
- eb_size = dev_info.eb_size - dev_info.eb_size % req.alignment;
- req.bytes = MIN_AVAIL_EBS * eb_size;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
- req.vol_id);
- if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
- failed("ubi_get_vol_info");
- goto remove;
- }
-
- if (test_update1(&vol_info)) {
- err_msg("alignment = %d", req.alignment);
- goto remove;
- }
-
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
- }
-
- return 0;
-
-remove:
- ubi_rmvol(libubi, node, req.vol_id);
- return -1;
-}
-
-#define SEQUENCES(io, s) { \
- {3*(s)-(io)-1, 1}, \
- {512}, \
- {666}, \
- {2048}, \
- {(io), (io), PAGE_SIZE}, \
- {(io)+1, (io)+1, PAGE_SIZE}, \
- {PAGE_SIZE}, \
- {PAGE_SIZE-1}, \
- {PAGE_SIZE+(io)}, \
- {(s)}, \
- {(s)-1}, \
- {(s)+1}, \
- {(io), (s)+1}, \
- {(s)+(io), PAGE_SIZE}, \
- {2*(s), PAGE_SIZE}, \
- {PAGE_SIZE, 2*(s), 1}, \
- {PAGE_SIZE, 2*(s)}, \
- {2*(s)-1, 2*(s)-1}, \
- {3*(s), PAGE_SIZE + 1}, \
- {1, PAGE_SIZE}, \
- {(io), (s)} \
-}
-#define SEQ_SZ 21
-
-/*
- * test_update1 - helper function for test_update().
- */
-static int test_update1(struct ubi_vol_info *vol_info)
-{
- int sequences[SEQ_SZ][3] = SEQUENCES(dev_info.min_io_size,
- vol_info->eb_size);
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
- unsigned char buf[vol_info->rsvd_bytes];
- int fd, i, j;
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
- vol_info->vol_id);
-
- for (i = 0; i < vol_info->rsvd_bytes; i++)
- buf[i] = (unsigned char)i;
-
- fd = open(vol_node, O_RDWR);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", node);
- return -1;
- }
-
- for (i = 0; i < SEQ_SZ; i++) {
- int ret, stop = 0, len;
- off_t off = 0;
- unsigned char buf1[vol_info->rsvd_bytes];
-
- if (ubi_update_start(libubi, fd, vol_info->rsvd_bytes)) {
- failed("ubi_update_start");
- goto close;
- }
-
- for (j = 0; off < vol_info->rsvd_bytes; j++) {
- if (!stop) {
- if (sequences[i][j] != 0)
- len = sequences[i][j];
- else
- stop = 1;
- }
-
- ret = write(fd, &buf[off], len);
- if (ret < 0) {
- failed("write");
- err_msg("failed to write %d bytes at offset "
- "%lld", len, (long long) off);
- goto close;
- }
- if (off + len > vol_info->rsvd_bytes)
- len = vol_info->rsvd_bytes - off;
- if (ret != len) {
- err_msg("failed to write %d bytes at offset "
- "%lld, wrote %d", len, (long long) off, ret);
- goto close;
- }
- off += len;
- }
-
- /* Check data */
- if ((ret = lseek(fd, SEEK_SET, 0)) != 0) {
- if (ret < 0)
- failed("lseek");
- err_msg("cannot seek to 0");
- goto close;
- }
- memset(&buf1[0], 0x01, vol_info->rsvd_bytes);
- ret = read(fd, &buf1[0], vol_info->rsvd_bytes + 1);
- if (ret < 0) {
- failed("read");
- err_msg("failed to read %d bytes",
- vol_info->rsvd_bytes + 1);
- goto close;
- }
- if (ret != vol_info->rsvd_bytes) {
- err_msg("failed to read %d bytes, read %d",
- vol_info->rsvd_bytes, ret);
- goto close;
- }
- if (memcmp(&buf[0], &buf1[0], vol_info->rsvd_bytes)) {
- err_msg("data corruption");
- goto close;
- }
- }
-
- close(fd);
- return 0;
-
-close:
- close(fd);
- return -1;
-}
-
-/**
- * test_update_ff - check volume with 0xFF data
- *
- * This function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_update_ff(void)
-{
- struct ubi_mkvol_request req;
- const char *name = TESTNAME ":io_update()";
- struct ubi_vol_info vol_info;
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
- int i, fd, ret, types[2];
- int upd_len = MIN_AVAIL_EBS * dev_info.eb_size;
- char buf[upd_len], buf1[upd_len];
-
- for(i = 0; i < MIN_AVAIL_EBS; i++) {
- if (i % 1)
- memset(&buf[0], 0xAB, upd_len);
- else
- memset(&buf[0], 0xFF, upd_len);
- }
-
- types[0] = UBI_DYNAMIC_VOLUME;
- types[1] = UBI_STATIC_VOLUME;
-
- for (i = 0; i < 2; i++) {
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.vol_type = types[i];
- req.name = name;
-
- req.alignment = 1;
- req.bytes = upd_len;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
- req.vol_id);
- if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
- failed("ubi_get_vol_info");
- goto remove;
- }
-
- fd = open(vol_node, O_RDWR);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", node);
- goto remove;
- }
-
- if (ubi_update_start(libubi, fd, upd_len)) {
- failed("ubi_update_start");
- goto close;
- }
-
-
- ret = write(fd, &buf[0], upd_len);
- if (ret < 0 || ret != upd_len) {
- failed("write");
- err_msg("failed to write %d bytes", upd_len);
- goto close;
- }
-
- /* Check data */
- if ((ret = lseek(fd, SEEK_SET, 0)) != 0) {
- if (ret < 0)
- failed("lseek");
- err_msg("cannot seek to 0");
- goto close;
- }
-
- close(fd);
-
- fd = open(vol_node, O_RDWR);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", node);
- goto remove;
- }
-
- memset(&buf1[0], 0x00, upd_len);
- ret = read(fd, &buf1[0], upd_len);
- if (ret < 0) {
- failed("read");
- err_msg("failed to read %d bytes", upd_len);
- goto close;
- }
- if (ret != upd_len) {
- err_msg("failed to read %d bytes, read %d",
- upd_len, ret);
- goto close;
- }
- if (memcmp(&buf[0], &buf1[0], upd_len)) {
- err_msg("data corruption");
- goto close;
- }
-
- close(fd);
-
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
- }
-
- return 0;
-
-close:
- close(fd);
-remove:
- ubi_rmvol(libubi, node, req.vol_id);
- return -1;
-}
diff --git a/ubi-utils/tests/mkvol_bad.c b/ubi-utils/tests/mkvol_bad.c
deleted file mode 100644
index 023b06b..0000000
--- a/ubi-utils/tests/mkvol_bad.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test UBI volume creation and deletion ioctl()s with bad input and in case of
- * incorrect usage.
- */
-
-#include <string.h>
-#include <errno.h>
-#include <stdio.h>
-#include "libubi.h"
-#define TESTNAME "mkvol_bad"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_mkvol(void);
-static int test_rmvol(void);
-
-int main(int argc, char * const argv[])
-{
- if (initial_check(argc, argv))
- return 1;
-
- node = argv[1];
-
- libubi = libubi_open();
- if (libubi == NULL) {
- failed("libubi_open");
- return 1;
- }
-
- if (ubi_get_dev_info(libubi, node, &dev_info)) {
- failed("ubi_get_dev_info");
- goto close;
- }
-
- if (test_mkvol())
- goto close;
-
- if (test_rmvol())
- goto close;
-
- libubi_close(libubi);
- return 0;
-
-close:
- libubi_close(libubi);
- return 1;
-}
-
-/**
- * test_mkvol - test that UBI mkvol ioctl rejects bad input parameters.
- *
- * This function returns %0 if the test passed and %-1 if not.
- */
-static int test_mkvol(void)
-{
- int ret, i;
- struct ubi_mkvol_request req;
- const char *name = TESTNAME ":test_mkvol()";
-
- req.alignment = 1;
- req.bytes = dev_info.avail_bytes;
- req.vol_type = UBI_DYNAMIC_VOLUME;
- req.name = name;
-
- /* Bad volume ID */
- req.vol_id = -2;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "vol_id = %d", req.vol_id))
- return -1;
-
- req.vol_id = dev_info.max_vol_count;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "vol_id = %d", req.vol_id))
- return -1;
-
- /* Bad alignment */
- req.vol_id = 0;
- req.alignment = 0;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "alignment = %d",
- req.alignment))
- return -1;
-
- req.alignment = -1;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "alignment = %d",
- req.alignment))
- return -1;
-
- req.alignment = dev_info.eb_size + 1;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "alignment = %d",
- req.alignment))
- return -1;
-
- if (dev_info.min_io_size > 1) {
- req.alignment = dev_info.min_io_size + 1;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "alignment = %d",
- req.alignment))
- return -1;
- }
-
- /* Bad bytes */
- req.alignment = 1;
- req.bytes = -1;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "bytes = %lld", req.bytes))
- return -1;
-
- req.bytes = 0;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "bytes = %lld", req.bytes))
- return -1;
-
- req.bytes = dev_info.avail_bytes + 1;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, ENOSPC, "ubi_mkvol", "bytes = %lld", req.bytes))
- return -1;
-
- req.alignment = dev_info.eb_size - dev_info.min_io_size;
- req.bytes = (dev_info.eb_size - dev_info.eb_size % req.alignment) *
- dev_info.avail_ebs + 1;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, ENOSPC, "ubi_mkvol", "bytes = %lld", req.bytes))
- return -1;
-
- /* Bad vol_type */
- req.alignment = 1;
- req.bytes = dev_info.eb_size;
- req.vol_type = UBI_DYNAMIC_VOLUME + UBI_STATIC_VOLUME;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "vol_type = %d",
- req.vol_type))
- return -1;
-
- req.vol_type = UBI_DYNAMIC_VOLUME;
-
- /* Too long name */
- {
- char name[UBI_VOL_NAME_MAX + 5];
-
- memset(&name[0], 'x', UBI_VOL_NAME_MAX + 1);
- name[UBI_VOL_NAME_MAX + 1] = '\0';
-
- req.name = &name[0];
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EINVAL, "ubi_mkvol", "name_len = %d",
- UBI_VOL_NAME_MAX + 1))
- return -1;
- }
-
- /* Try to create 2 volumes with the same ID and name */
- req.name = name;
- req.vol_id = 0;
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EEXIST, "ubi_mkvol",
- "volume with ID 0 created twice"))
- return -1;
-
- req.vol_id = 1;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EEXIST, "ubi_mkvol",
- "volume with name \"%s\" created twice", name))
- return -1;
-
- if (ubi_rmvol(libubi, node, 0)) {
- failed("ubi_rmvol");
- return -1;
- }
-
- /* Try to use too much space */
- req.vol_id = 0;
- req.bytes = dev_info.avail_bytes;
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- req.bytes = 1;
- req.vol_id = 1;
- ret = ubi_mkvol(libubi, node, &req);
- if (check_failed(ret, EEXIST, "ubi_mkvol",
- "created volume of maximum size %lld, but still "
- "can create more volumes", dev_info.avail_bytes))
- return -1;
-
- if (ubi_rmvol(libubi, node, 0)) {
- failed("ubi_rmvol");
- return -1;
- }
-
- /* Try to create too many volumes */
- for (i = 0; i < dev_info.max_vol_count; i++) {
- char nm[strlen(name) + 50];
-
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.alignment = 1;
- req.bytes = 1;
- req.vol_type = UBI_STATIC_VOLUME;
-
- sprintf(&nm[0], "%s:%d", name, i);
- req.name = &nm[0];
-
- if (ubi_mkvol(libubi, node, &req)) {
- /*
- * Note, because of gluebi we may be unable to create
- * dev_info.max_vol_count devices (MTD restrictions).
- */
- if (errno == ENFILE)
- break;
- failed("ubi_mkvol");
- err_msg("vol_id %d", i);
- goto remove;
- }
- }
-
- for (i = 0; i < dev_info.max_vol_count + 1; i++)
- ubi_rmvol(libubi, node, i);
-
- return 0;
-
-remove:
- for (i = 0; i < dev_info.max_vol_count + 1; i++)
- ubi_rmvol(libubi, node, i);
- return -1;
-}
-
-/**
- * test_rmvol - test that UBI rmvol ioctl rejects bad input parameters.
- *
- * This function returns %0 if the test passed and %-1 if not.
- */
-static int test_rmvol(void)
-{
- int ret;
- struct ubi_mkvol_request req;
- const char *name = TESTNAME ":test_rmvol()";
-
- /* Bad vol_id */
- ret = ubi_rmvol(libubi, node, -1);
- if (check_failed(ret, EINVAL, "ubi_rmvol", "vol_id = -1"))
- return -1;
-
- ret = ubi_rmvol(libubi, node, dev_info.max_vol_count);
- if (check_failed(ret, EINVAL, "ubi_rmvol", "vol_id = %d",
- dev_info.max_vol_count))
- return -1;
-
- /* Try to remove non-existing volume */
- ret = ubi_rmvol(libubi, node, 0);
- if (check_failed(ret, ENODEV, "ubi_rmvol",
- "removed non-existing volume 0"))
- return -1;
-
- /* Try to remove volume twice */
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.alignment = 1;
- req.bytes = dev_info.avail_bytes;
- req.vol_type = UBI_DYNAMIC_VOLUME;
- req.name = name;
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
-
- ret = ubi_rmvol(libubi, node, req.vol_id);
- if (check_failed(ret, ENODEV, "ubi_rmvol", "volume %d removed twice",
- req.vol_id))
- return -1;
-
- return 0;
-}
diff --git a/ubi-utils/tests/mkvol_basic.c b/ubi-utils/tests/mkvol_basic.c
deleted file mode 100644
index e2120e9..0000000
--- a/ubi-utils/tests/mkvol_basic.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test test checks basic volume creation and deletion capabilities.
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <string.h>
-#include "libubi.h"
-#define TESTNAME "mkvol_basic"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int mkvol_basic(void);
-static int mkvol_alignment(void);
-static int mkvol_multiple(void);
-
-int main(int argc, char * const argv[])
-{
- if (initial_check(argc, argv))
- return 1;
-
- node = argv[1];
-
- libubi = libubi_open();
- if (libubi == NULL) {
- failed("libubi_open");
- return 1;
- }
-
- if (ubi_get_dev_info(libubi, node, &dev_info)) {
- failed("ubi_get_dev_info");
- goto close;
- }
-
- if (mkvol_basic())
- goto close;
-
- if (mkvol_alignment())
- goto close;
-
- if (mkvol_multiple())
- goto close;
-
- libubi_close(libubi);
- return 0;
-
-close:
- libubi_close(libubi);
- return 1;
-}
-
-/**
- * mkvol_alignment - create volumes with different alignments.
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int mkvol_alignment(void)
-{
- struct ubi_mkvol_request req;
- int i, vol_id, ebsz;
- const char *name = TESTNAME ":mkvol_alignment()";
- int alignments[] = ALIGNMENTS(dev_info.eb_size);
-
- for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
- req.vol_id = UBI_VOL_NUM_AUTO;
-
- /* Alignment should actually be multiple of min. I/O size */
- req.alignment = alignments[i];
- req.alignment -= req.alignment % dev_info.min_io_size;
- if (req.alignment == 0)
- req.alignment = dev_info.min_io_size;
-
- /* Bear in mind alignment reduces EB size */
- ebsz = dev_info.eb_size - dev_info.eb_size % req.alignment;
- req.bytes = dev_info.avail_ebs * ebsz;
-
- req.vol_type = UBI_DYNAMIC_VOLUME;
- req.name = name;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- err_msg("alignment %d", req.alignment);
- return -1;
- }
-
- vol_id = req.vol_id;
- if (check_volume(vol_id, &req))
- goto remove;
-
- if (ubi_rmvol(libubi, node, vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
- }
-
- return 0;
-
-remove:
- ubi_rmvol(libubi, node, vol_id);
- return -1;
-}
-
-/**
- * mkvol_basic - simple test that checks basic volume creation capability.
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int mkvol_basic(void)
-{
- struct ubi_mkvol_request req;
- struct ubi_vol_info vol_info;
- int vol_id, ret;
- const char *name = TESTNAME ":mkvol_basic()";
-
- /* Create dynamic volume of maximum size */
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.alignment = 1;
- req.bytes = dev_info.avail_bytes;
- req.vol_type = UBI_DYNAMIC_VOLUME;
- req.name = name;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- vol_id = req.vol_id;
- if (check_volume(vol_id, &req))
- goto remove;
-
- if (ubi_rmvol(libubi, node, vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
-
- /* Create static volume of maximum size */
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.alignment = 1;
- req.bytes = dev_info.avail_bytes;
- req.vol_type = UBI_STATIC_VOLUME;
- req.name = name;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- vol_id = req.vol_id;
- if (check_volume(vol_id, &req))
- goto remove;
-
- if (ubi_rmvol(libubi, node, vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
-
- /* Make sure volume does not exist */
- ret = ubi_get_vol_info1(libubi, dev_info.dev_num, vol_id, &vol_info);
- if (ret == 0) {
- err_msg("removed volume %d exists", vol_id);
- goto remove;
- }
-
- return 0;
-
-remove:
- ubi_rmvol(libubi, node, vol_id);
- return -1;
-}
-
-/**
- * mkvol_multiple - test multiple volumes creation
- *
- * Thus function returns %0 if the test passed and %-1 if not.
- */
-static int mkvol_multiple(void)
-{
- struct ubi_mkvol_request req;
- int i, ret, max = dev_info.max_vol_count;
- const char *name = TESTNAME ":mkvol_multiple()";
-
- /* Create maximum number of volumes */
- for (i = 0; i < max; i++) {
- char nm[strlen(name) + 50];
-
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.alignment = 1;
- req.bytes = 1;
- req.vol_type = UBI_STATIC_VOLUME;
-
- sprintf(&nm[0], "%s:%d", name, i);
- req.name = &nm[0];
-
- if (ubi_mkvol(libubi, node, &req)) {
- if (errno == ENFILE) {
- max = i;
- break;
- }
- failed("ubi_mkvol");
- err_msg("vol_id %d", i);
- goto remove;
- }
-
- if (check_volume(req.vol_id, &req)) {
- err_msg("vol_id %d", i);
- goto remove;
- }
- }
-
- for (i = 0; i < max; i++) {
- struct ubi_vol_info vol_info;
-
- if (ubi_rmvol(libubi, node, i)) {
- failed("ubi_rmvol");
- return -1;
- }
-
- /* Make sure volume does not exist */
- ret = ubi_get_vol_info1(libubi, dev_info.dev_num, i, &vol_info);
- if (ret == 0) {
- err_msg("removed volume %d exists", i);
- goto remove;
- }
- }
-
- return 0;
-
-remove:
- for (i = 0; i < dev_info.max_vol_count + 1; i++)
- ubi_rmvol(libubi, node, i);
- return -1;
-}
diff --git a/ubi-utils/tests/mkvol_paral.c b/ubi-utils/tests/mkvol_paral.c
deleted file mode 100644
index faf085c..0000000
--- a/ubi-utils/tests/mkvol_paral.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * This test creates and deletes volumes in parallel.
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <string.h>
-#include <pthread.h>
-#include "libubi.h"
-#define TESTNAME "mkvol_paral"
-#include "common.h"
-
-#define THREADS_NUM 4
-#define ITERATIONS 500
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-static int iterations = ITERATIONS;
-
-static void * the_thread(void *ptr);
-
-int main(int argc, char * const argv[])
-{
- int i, ret;
- pthread_t threads[THREADS_NUM];
-
- if (initial_check(argc, argv))
- return 1;
-
- node = argv[1];
-
- libubi = libubi_open();
- if (libubi == NULL) {
- failed("libubi_open");
- return 1;
- }
-
- if (ubi_get_dev_info(libubi, node, &dev_info)) {
- failed("ubi_get_dev_info");
- goto close;
- }
-
- for (i = 0; i < THREADS_NUM; i++) {
- ret = pthread_create(&threads[i], NULL, &the_thread, (void*)i);
- if (ret) {
- failed("pthread_create");
- goto close;
- }
- }
-
- for (i = 0; i < THREADS_NUM; i++)
- pthread_join(threads[i], NULL);
-
- libubi_close(libubi);
- return 0;
-
-close:
- libubi_close(libubi);
- return 1;
-}
-
-/**
- * the_thread - the testing thread.
- *
- * @ptr thread number
- */
-static void * the_thread(void *ptr)
-{
- int n = (int)ptr, iter = iterations;
- struct ubi_mkvol_request req;
- const char *name = TESTNAME ":the_thread()";
- char nm[strlen(name) + 50];
-
- req.alignment = 1;
- req.bytes = dev_info.avail_bytes/ITERATIONS;
- req.vol_type = UBI_DYNAMIC_VOLUME;
- sprintf(&nm[0], "%s:%d", name, n);
- req.name = &nm[0];
-
- while (iter--) {
- req.vol_id = UBI_VOL_NUM_AUTO;
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return NULL;
- }
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return NULL;
- }
- }
-
- return NULL;
-}
diff --git a/ubi-utils/tests/rsvol.c b/ubi-utils/tests/rsvol.c
deleted file mode 100644
index 7a9e5ea..0000000
--- a/ubi-utils/tests/rsvol.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Tes UBI volume re-size.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "rsvol"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_basic(int type);
-static int test_rsvol(int type);
-
-int main(int argc, char * const argv[])
-{
- if (initial_check(argc, argv))
- return 1;
-
- node = argv[1];
-
- libubi = libubi_open();
- if (libubi == NULL) {
- failed("libubi_open");
- return 1;
- }
-
- if (ubi_get_dev_info(libubi, node, &dev_info)) {
- failed("ubi_get_dev_info");
- goto close;
- }
-
- if (test_basic(UBI_DYNAMIC_VOLUME))
- goto close;
- if (test_basic(UBI_STATIC_VOLUME))
- goto close;
- if (test_rsvol(UBI_DYNAMIC_VOLUME))
- goto close;
- if (test_rsvol(UBI_STATIC_VOLUME))
- goto close;
-
- libubi_close(libubi);
- return 0;
-
-close:
- libubi_close(libubi);
- return 1;
-}
-
-/**
- * test_basic - check volume re-size capability.
- *
- * @type volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_basic(int type)
-{
- struct ubi_mkvol_request req;
- const char *name = TESTNAME ":test_basic()";
-
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.alignment = 1;
- req.bytes = MIN_AVAIL_EBS * dev_info.eb_size;
- req.vol_type = type;
- req.name = name;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- req.bytes = dev_info.eb_size;
- if (ubi_rsvol(libubi, node, req.vol_id, req.bytes)) {
- failed("ubi_rsvol");
- goto remove;
- }
-
- if (check_volume(req.vol_id, &req))
- goto remove;
-
- req.bytes = (MIN_AVAIL_EBS + 1) * dev_info.eb_size;
- if (ubi_rsvol(libubi, node, req.vol_id, req.bytes)) {
- failed("ubi_rsvol");
- goto remove;
- }
-
- if (check_volume(req.vol_id, &req))
- goto remove;
-
- req.bytes -= 1;
- if (ubi_rsvol(libubi, node, req.vol_id, req.bytes)) {
- failed("ubi_rsvol");
- goto remove;
- }
-
- if (check_volume(req.vol_id, &req))
- goto remove;
-
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
-
- return 0;
-
-remove:
- ubi_rmvol(libubi, node, req.vol_id);
- return -1;
-}
-
-static int test_rsvol1(struct ubi_vol_info *vol_info);
-
-/**
- * test_rsvol - test UBI volume re-size.
- *
- * @type volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_rsvol(int type)
-{
- const char *name = TESTNAME "test_rsvol:()";
- int alignments[] = ALIGNMENTS(dev_info.eb_size);
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
- struct ubi_mkvol_request req;
- int i;
-
- for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
- int eb_size;
- struct ubi_vol_info vol_info;
-
- req.vol_id = UBI_VOL_NUM_AUTO;
- req.vol_type = type;
- req.name = name;
-
- req.alignment = alignments[i];
- req.alignment -= req.alignment % dev_info.min_io_size;
- if (req.alignment == 0)
- req.alignment = dev_info.min_io_size;
-
- eb_size = dev_info.eb_size - dev_info.eb_size % req.alignment;
- req.bytes = MIN_AVAIL_EBS * eb_size;
-
- if (ubi_mkvol(libubi, node, &req)) {
- failed("ubi_mkvol");
- return -1;
- }
-
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
- req.vol_id);
-
- if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
- failed("ubi_get_vol_info");
- goto remove;
- }
-
- if (test_rsvol1(&vol_info)) {
- err_msg("alignment = %d", req.alignment);
- goto remove;
- }
-
- if (ubi_rmvol(libubi, node, req.vol_id)) {
- failed("ubi_rmvol");
- return -1;
- }
- }
-
- return 0;
-
-remove:
- ubi_rmvol(libubi, node, req.vol_id);
- return -1;
-}
-
-/*
- * Helper function for test_rsvol().
- */
-static int test_rsvol1(struct ubi_vol_info *vol_info)
-{
- long long bytes;
- struct ubi_vol_info vol_info1;
- char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
- unsigned char buf[vol_info->rsvd_bytes];
- int fd, i, ret;
-
- /* Make the volume smaller and check basic volume I/O */
- bytes = vol_info->rsvd_bytes - vol_info->eb_size;
- if (ubi_rsvol(libubi, node, vol_info->vol_id, bytes - 1)) {
- failed("ubi_rsvol");
- return -1;
- }
-
- if (ubi_get_vol_info1(libubi, vol_info->dev_num, vol_info->vol_id,
- &vol_info1)) {
- failed("ubi_get_vol_info");
- return -1;
- }
-
- if (vol_info1.rsvd_bytes != bytes) {
- err_msg("rsvd_bytes %lld, must be %lld",
- vol_info1.rsvd_bytes, bytes);
- return -1;
- }
-
- if (vol_info1.rsvd_ebs != vol_info->rsvd_ebs - 1) {
- err_msg("rsvd_ebs %d, must be %d",
- vol_info1.rsvd_ebs, vol_info->rsvd_ebs - 1);
- return -1;
- }
-
- /* Write data to the volume */
- sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
- vol_info->vol_id);
-
- fd = open(vol_node, O_RDWR);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", vol_node);
- return -1;
- }
-
- bytes = vol_info->rsvd_bytes - vol_info->eb_size - 1;
- if (ubi_update_start(libubi, fd, bytes)) {
- failed("ubi_update_start");
- goto close;
- }
-
- for (i = 0; i < bytes; i++)
- buf[i] = (unsigned char)i;
-
- ret = write(fd, &buf[0], bytes);
- if (ret != bytes) {
- failed("write");
- goto close;
- }
-
- close(fd);
-
- if (ubi_rsvol(libubi, node, vol_info->vol_id, bytes)) {
- failed("ubi_rsvol");
- return -1;
- }
-
- if (ubi_rsvol(libubi, node, vol_info->vol_id,
- vol_info->eb_size * dev_info.avail_ebs)) {
- failed("ubi_rsvol");
- return -1;
- }
-
- fd = open(vol_node, O_RDWR);
- if (fd == -1) {
- failed("open");
- err_msg("cannot open \"%s\"\n", vol_node);
- return -1;
- }
-
- /* Read data back */
- if (lseek(fd, 0, SEEK_SET) != 0) {
- failed("seek");
- goto close;
- }
- memset(&buf[0], 0, bytes);
- ret = read(fd, &buf[0], bytes);
- if (ret != bytes) {
- failed("read");
- goto close;
- }
-
- for (i = 0; i < bytes; i++) {
- if (buf[i] != (unsigned char)i) {
- err_msg("bad data");
- goto close;
- }
- }
-
- close(fd);
- return 0;
-
-close:
- close(fd);
- return -1;
-}
diff --git a/ubi-utils/tests/runtests.pl b/ubi-utils/tests/runtests.pl
deleted file mode 100755
index 8005716..0000000
--- a/ubi-utils/tests/runtests.pl
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/usr/bin/perl -w
-
-sub usage;
-
-my @tests = ("mkvol_basic", "mkvol_bad", "mkvol_paral", "rsvol",
- "io_basic", "io_read", "io_update", "io_paral");
-
-if (not defined @ARGV) {
- usage();
- exit;
-}
-
-foreach (@ARGV) {
- -c or die "Error: $_ is not character device\n";
-}
-
-my $dev;
-foreach $dev (@ARGV) {
- foreach (@tests) {
- print "Running: $_ $dev";
- system "./$_ $dev" and die;
- print "\tSUCCESS\n";
- }
-}
-
-sub usage
-{
- print "Usage:\n";
- print "$0 <UBI device 1> <UBI device 2> ...\n";
-}
diff --git a/ubi-utils/tests/runtests.sh b/ubi-utils/tests/runtests.sh
deleted file mode 100755
index f993bc0..0000000
--- a/ubi-utils/tests/runtests.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-
-ubidev="$1"
-ubiloadcmd="$2"
-tests="mkvol_basic mkvol_bad mkvol_paral rsvol io_basic io_read io_update io_paral"
-
-if test -z "$ubidev" || test -z "$ubiloadcmd";
-then
- echo "Usage:"
- echo "$0 <UBI device> <ubi module load command>"
- exit 1
-fi
-
-ubiname=`echo $ubidev | cut -d/ -f3`
-
-major=`cat /sys/class/ubi/$ubiname/dev | cut -d: -f1`
-
-for minor in `seq 0 4`; do
- if test ! -e ${ubidev}_${minor} ;
- then
- mknod ${ubidev}_${minor} c $major $(($minor + 1))
- fi
-done
-
-if ! test -c "$ubidev";
-then
- echo "Error: $ubidev is not character device"
- exit 1
-fi
-
-for t in `echo $tests`;
-do
- echo "Running $t $ubidev"
- "./$t" "$ubidev" || exit 1
-done
-
-./integ "$ubiloadcmd" || exit 1
-
-echo SUCCESS
-
-exit 0