Remove redundant tests

Sorry for this mess in the history, but I hope this is the
last ugly commit. I accidentally copies the tests from
mtd-utils.git/tests/ubi-tests/ to here. Remove them.

Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>

15 files changed, 0 insertions, 3532 deletions

diff --git a/ubi-utils/tests/Makefile b/ubi-utils/tests/Makefile
deleted file mode 100644
index 1b17f81..0000000
--- a/ubi-utils/tests/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-
-INCLUDE1=../inc
-INCLUDE2=../../include
-LIB=.
-
-CC := $(CROSS)gcc
-
-ALL_FILES=libubi.a io_update
-ALL_FILES+=io_paral io_read io_basic mkvol_basic mkvol_bad mkvol_paral rsvol
-ALL_FILES+=integ
-
-CFLAGS += -Wall -I$(INCLUDE1) -I$(INCLUDE2) -L$(LIB) -ggdb
-
-all: $(ALL_FILES)
-
-libubi.a: ../src/libubi.c  ../inc/libubi.h  ../src/libubi_int.h
-	$(CC) $(CFLAGS) -c ../src/libubi.c -o libubi.o
-	ar cr libubi.a libubi.o
-
-io_paral: io_paral.c common.c
-	$(CC) $(CFLAGS) $^ -lubi -lpthread -o $@
-io_update: io_update.c common.c
-	$(CC) $(CFLAGS) $^ -lubi -o $@
-io_read: io_read.c common.c
-	$(CC) $(CFLAGS) $^ -lubi -o $@
-io_basic: io_basic.c common.c
-	$(CC) $(CFLAGS) $^ -lubi -o $@
-mkvol_basic: mkvol_basic.c common.c
-	$(CC) $(CFLAGS) $^ -lubi -o $@
-mkvol_bad: mkvol_bad.c common.c
-	$(CC) $(CFLAGS) $^ -lubi -o $@
-mkvol_paral: mkvol_paral.c common.c
-	$(CC) $(CFLAGS) $^ -lubi -lpthread -o $@
-rsvol: rsvol.c common.c
-	$(CC) $(CFLAGS) $^ -lubi -o $@
-integ: integ.c
-	$(CC) $(CFLAGS) $^ -lubi -o $@
-
-clean:
-	rm -rf $(ALL_FILES) $(addsuffix .o, $(ALL_FILES))
diff --git a/ubi-utils/tests/README.udev b/ubi-utils/tests/README.udev
deleted file mode 100644
index a4ff9c5..0000000
--- a/ubi-utils/tests/README.udev
+++ /dev/null
@@ -1,19 +0,0 @@
-There is a problem with udev: when a volume is created, there is a delay
-before corresponding /dev/ubiX_Y device node is created by udev, so some
-tests fail because of this. The symptom is error messages like
-"cannot open /dev/ubi0_0".
-
-One possible solution of this problem is to pre-create UBI device and volume
-nodes. there is even a script which may be used for this in ubi-utils/scripts/.
-But this is not enough because udev will still remove and re-create the nodes
-and tests will still fail. So you need to stop removing device nodes using
-the following udev rule:
-
-	KERNEL=="ubi*_*", ACTION=="remove", OPTIONS+="ignore_device"
-
-In our Ubuntu distribution we put that to new file:
-/etc/udev/rules.d/50-local.rules
-
-Another possibility is to call udevsettle utility in libubi after the volume
-has been created See src/libubi.c - the call is there but is commented out.
-This is anyway an ugly hack, but works, although makes the tests slower.
diff --git a/ubi-utils/tests/common.c b/ubi-utils/tests/common.c
deleted file mode 100644
index cb63e77..0000000
--- a/ubi-utils/tests/common.c
+++ /dev/null
@@ -1,336 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * The stuff which is common for many tests.
- */
-
-#include <stdarg.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#include "common.h"
-
-/**
- * __initial_check - check that common prerequisites which are required to run
- * tests.
- *
- * @test  test name
- * @argc  count of command-line arguments
- * @argv  command-line arguments
- *
- * This function returns %0 if all is fine and test may be run and %-1 if not.
- */
-int __initial_check(const char *test, int argc, char * const argv[])
-{
-	libubi_t libubi;
-	struct ubi_dev_info dev_info;
-
-	/*
-	 * All tests require UBI character device name as the first parameter,
-	 * check this.
-	 */
-	if (argc < 2) {
-		__err_msg(test, __FUNCTION__, __LINE__,
-			  "UBI character device node is not specified");
-		return -1;
-	}
-
-	libubi = libubi_open();
-	if (libubi == NULL) {
-		__failed(test, __FUNCTION__, __LINE__, "libubi_open");
-		return -1;
-	}
-
-	if (ubi_get_dev_info(libubi, argv[1], &dev_info)) {
-		__failed(test, __FUNCTION__, __LINE__, "ubi_get_dev_info");
-		goto close;
-	}
-
-	if (dev_info.avail_ebs < MIN_AVAIL_EBS) {
-		__err_msg(test, __FUNCTION__, __LINE__,
-			  "insufficient available eraseblocks %d on UBI "
-			  "device, required %d",
-			  dev_info.avail_ebs, MIN_AVAIL_EBS);
-		goto close;
-	}
-
-	if (dev_info.vol_count != 0) {
-		__err_msg(test, __FUNCTION__, __LINE__,
-			  "device %s is not empty", argv[1]);
-		goto close;
-	}
-
-	libubi_close(libubi);
-	return 0;
-
-close:
-	libubi_close(libubi);
-	return -1;
-}
-
-/**
- * __err_msg - print a message to stderr.
- *
- * @test  test name
- * @func  function name
- * @line  line number
- * @fmt   format string
- */
-void __err_msg(const char *test, const char *func, int line,
-	       const char *fmt, ...)
-{
-	va_list args;
-
-	fprintf(stderr, "[%s] %s():%d: ", test, func, line);
-	va_start(args, fmt);
-	vfprintf(stderr, fmt, args);
-	fprintf(stderr, "\n");
-	va_end(args);
-}
-
-/**
- * __failed - print function fail message.
- *
- * @test    test name
- * @func    calling function name
- * @line    line number
- * @failed  failed function name
- */
-void __failed(const char *test, const char *func, int line,
-	      const char *failed)
-{
-	fprintf(stderr, "[%s] %s():%d: function %s() failed with error %d (%s)\n",
-		test, func, line, failed, errno, strerror(errno));
-}
-
-/**
- * __check_volume - check volume information.
- *
- * @libubi    libubi descriptor
- * @dev_info  UBI device description
- * @test      test name
- * @func      function name
- * @line      line number
- * @vol_id    ID of existing volume to check
- * @req       volume creation request to compare with
- *
- * This function checks if a volume created using @req request has exactly the
- * requested characteristics. Returns 0 in case of success and %-1 in case of
- * error.
- */
-int __check_volume(libubi_t libubi, struct ubi_dev_info *dev_info,
-		   const char *test, const char *func, int line, int vol_id,
-		   const struct ubi_mkvol_request *req)
-{
-	int ret;
-	struct ubi_vol_info vol_info;
-	int eb_size;
-	long long rsvd_bytes;
-
-	ret = ubi_get_vol_info1(libubi, dev_info->dev_num, vol_id, &vol_info);
-	if (ret) {
-		__failed(test, func, line, "ubi_get_vol_info");
-		return -1;
-	}
-
-	if (req->alignment != vol_info.alignment) {
-		__err_msg(test, func, line,
-			  "bad alignment: requested %d, got %d",
-			  req->alignment, vol_info.alignment);
-		return -1;
-	}
-	if (req->vol_type != vol_info.type) {
-		__err_msg(test, func, line, "bad type: requested %d, got %d",
-			  req->vol_type, vol_info.type);
-		return -1;
-	}
-	if (strlen(req->name) != strlen(&vol_info.name[0]) ||
-	    strcmp(req->name, &vol_info.name[0]) != 0) {
-		__err_msg(test, func, line,
-			  "bad name: requested \"%s\", got \"%s\"",
-			  req->name, &vol_info.name[0]);
-		return -1;
-	}
-	if (vol_info.corrupted) {
-		__err_msg(test, func, line, "corrupted new volume");
-		return -1;
-	}
-
-	eb_size = dev_info->eb_size - (dev_info->eb_size % req->alignment);
-	if (eb_size != vol_info.eb_size) {
-		__err_msg(test, func, line,
-			  "bad usable LEB size %d, should be %d",
-			  vol_info.eb_size, eb_size);
-		return -1;
-	}
-
-	rsvd_bytes = req->bytes;
-	if (rsvd_bytes % eb_size)
-		rsvd_bytes += eb_size - (rsvd_bytes % eb_size);
-
-	if (rsvd_bytes != vol_info.rsvd_bytes) {
-		__err_msg(test, func, line,
-			  "bad reserved bytes %lld, should be %lld",
-			  vol_info.rsvd_bytes, rsvd_bytes);
-		return -1;
-	}
-
-	return 0;
-}
-
-/**
- * __check_vol_patt - check that volume contains certain data
- *
- * @libubi    libubi descriptor
- * @dev_info  UBI device description
- * @test    test name
- * @func    function name
- * @line    line number
- * @node    volume character device node
- * @byte    data pattern to check
- *
- * This function returns %0 if the volume contains only @byte bytes, and %-1 if
- * not.
- */
-int __check_vol_patt(libubi_t libubi, struct ubi_dev_info *dev_info,
-		     const char *test, const char *func, int line,
-		     const char *node, uint8_t byte)
-{
-	int ret, fd;
-	long long bytes = 0;
-	struct ubi_vol_info vol_info;
-	unsigned char buf[512];
-
-	fd = open(node, O_RDONLY);
-	if (fd == -1) {
-		__failed(test, func, line, "open");
-		__err_msg(test, func, line, "cannot open \"%s\"\n", node);
-		return -1;
-	}
-
-	ret = ubi_get_vol_info(libubi, node, &vol_info);
-	if (ret) {
-		__failed(test, func, line, "ubi_get_vol_info");
-		goto close;
-	}
-
-	while (bytes < vol_info.data_bytes) {
-		int i;
-
-		memset(&buf[0], ~byte, 512);
-		ret = read(fd, &buf[0], 512);
-		if (ret == -1) {
-			__failed(test, func, line, "read");
-			__err_msg(test, func, line, "bytes = %lld, ret = %d",
-				  bytes, ret);
-			goto close;
-		}
-
-		if (ret == 0 && bytes + ret < vol_info.data_bytes) {
-			__err_msg(test, func, line,
-				  "EOF, but read only %lld bytes of %lld",
-				  bytes + ret, vol_info.data_bytes);
-			goto close;
-		}
-
-		for (i = 0; i < ret; i++)
-			if (buf[i] != byte) {
-				__err_msg(test, func, line,
-					  "byte at %lld is not %#x but %#x",
-					  bytes + i, byte, (int)buf[i]);
-				goto close;
-			}
-
-		bytes += ret;
-	}
-
-	close(fd);
-	return 0;
-
-close:
-	close(fd);
-	return -1;
-}
-
-/**
- * __update_vol_patt - update volume using a certain byte pattern
- *
- * @libubi    libubi descriptor
- * @dev_info  UBI device description
- * @test      test name
- * @func      function name
- * @line      line number
- * @node      volume character device node
- * @byte      data pattern to check
- *
- * This function returns %0 in case of success, and %-1 if in case of failure.
- */
-int __update_vol_patt(libubi_t libubi, const char *test, const char *func,
-		      int line, const char *node, long long bytes, uint8_t byte)
-{
-	int ret, fd;
-	long long written = 0;
-	unsigned char buf[512];
-
-	fd = open(node, O_RDWR);
-	if (fd == -1) {
-		__failed(test, func, line, "open");
-		__err_msg(test, func, line, "cannot open \"%s\"\n", node);
-		return -1;
-	}
-
-	if (ubi_update_start(libubi, fd, bytes)) {
-		__failed(test, func, line, "ubi_update_start");
-		__err_msg(test, func, line, "bytes = %lld", bytes);
-		goto close;
-	}
-
-	memset(&buf[0], byte, 512);
-
-	while (written != bytes) {
-		ret = write(fd, &buf[0], 512);
-		if (ret == -1) {
-			__failed(test, func, line, "write");
-			__err_msg(test, func, line, "written = %lld, ret = %d",
-				  written, ret);
-			goto close;
-		}
-		written += ret;
-
-		if (written > bytes) {
-			__err_msg(test, func, line, "update length %lld bytes, "
-				  "but %lld bytes are already written",
-				  bytes, written);
-			goto close;
-		}
-	}
-
-	close(fd);
-	return 0;
-
-close:
-	close(fd);
-	return -1;
-}
diff --git a/ubi-utils/tests/common.h b/ubi-utils/tests/common.h
deleted file mode 100644
index 3e8ada8..0000000
--- a/ubi-utils/tests/common.h
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * The stuff which is common for many tests.
- */
-
-#ifndef __COMMON_H__
-#define __COMMON_H__
-
-#include <string.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#define UBI_VOLUME_PATTERN "/dev/ubi%d_%d"
-#define MIN_AVAIL_EBS 5
-#define PAGE_SIZE 4096
-
-#define min(a, b) ((a) < (b) ? (a) : (b))
-
-#define err_msg(fmt, ...)                                                      \
-	__err_msg(TESTNAME, __FUNCTION__, __LINE__, fmt, ##__VA_ARGS__)
-
-#define failed(name)                                                           \
-	__failed(TESTNAME, __FUNCTION__, __LINE__, name)
-
-#define initial_check(argc, argv)                                              \
-	__initial_check(TESTNAME, argc, argv)
-
-#define check_volume(vol_id, req)                                              \
-	__check_volume(libubi, &dev_info, TESTNAME, __FUNCTION__,              \
-		       __LINE__, vol_id, req)
-
-#define check_vol_patt(node, byte)                                             \
-	__check_vol_patt(libubi, &dev_info, TESTNAME, __FUNCTION__, __LINE__,  \
-			 node, byte)
-
-#define update_vol_patt(node, bytes, byte)                                     \
-	__update_vol_patt(libubi, TESTNAME, __FUNCTION__, __LINE__,            \
-			  node, bytes, byte)
-
-#define check_failed(ret, error, func, fmt, ...) ({                            \
-	int __ret;                                                             \
-		                                                               \
-	if (!ret) {                                                            \
-		err_msg("%s() returned success but should have failed", func); \
-		err_msg(fmt, ##__VA_ARGS__);                                   \
-		__ret = -1;                                                    \
-	}                                                                      \
-	if (errno != (error)) {                                                \
-		err_msg("%s failed with error %d (%s), expected %d (%s)",      \
-			func, errno, strerror(errno), error, strerror(error)); \
-		err_msg(fmt, ##__VA_ARGS__);                                   \
-		__ret = -1;                                                    \
-	}                                                                      \
-	__ret = 0;                                                             \
-})
-
-/* Alignments to test, @s is eraseblock size */
-#define ALIGNMENTS(s)                                                          \
-	{3, 5, 27, 666, 512, 1024, 2048, (s)/2-3, (s)/2-2, (s)/2-1, (s)/2+1,   \
-	 (s)/2+2, (s)/2+3, (s)/3-3, (s)/3-2, (s)/3-1, (s)/3+1, (s)/3+2,        \
-	 (s)/3+3, (s)/4-3, (s)/4-2, (s)/4-1, (s)/4+1, (s)/4+2, (s)/4+3,        \
-	 (s)/5-3, (s)/5-2, (s)/5-1, (s)/5+1, (s)/5+2, (s)/5+3, (s)-17, (s)-9,  \
-	 (s)-8, (s)-6, (s)-4, (s)-1, (s)};
-
-extern void __err_msg(const char *test, const char *func, int line,
-		      const char *fmt, ...);
-void __failed(const char *test, const char *func, int line,
-	      const char *failed);
-int __initial_check(const char *test, int argc, char * const argv[]);
-int __check_volume(libubi_t libubi, struct ubi_dev_info *dev_info,
-		   const char *test, const char *func, int line, int vol_id,
-		   const struct ubi_mkvol_request *req);
-int __check_vol_patt(libubi_t libubi, struct ubi_dev_info *dev_info,
-		     const char *test, const char *func, int line,
-		     const char *node, uint8_t byte);
-int __update_vol_patt(libubi_t libubi, const char *test, const char *func,
-		      int line, const char *node, long long bytes,
-		      uint8_t byte);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* !__COMMON_H__ */
diff --git a/ubi-utils/tests/integ.c b/ubi-utils/tests/integ.c
deleted file mode 100644
index 4da7121..0000000
--- a/ubi-utils/tests/integ.c
+++ /dev/null
@@ -1,783 +0,0 @@
-#define _LARGEFILE64_SOURCE
-
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <stdlib.h>
-#include <stdio.h>
-#include <stdint.h>
-#include <string.h>
-#include <errno.h>
-
-#include <sys/ioctl.h>
-#include <sys/stat.h>
-
-#include "libubi.h"
-
-struct erase_block_info;
-struct volume_info;
-struct ubi_device_info;
-
-struct write_info
-{
-	struct write_info *next;
-	struct erase_block_info *erase_block;
-	int offset_within_block; /* Offset within erase block */
-	off64_t offset; /* Offset within volume */
-	int size;
-	int random_seed;
-};
-
-struct erase_block_info
-{
-	struct volume_info *volume;
-	int block_number;
-	off64_t offset; /* Offset within volume */
-	off64_t top_of_data;
-	int touched; /* Have we done anything at all with this erase block */
-	int erased; /* This erased block is currently erased */
-	struct write_info *writes;
-};
-
-struct volume_fd
-{
-	struct volume_fd *next;
-	struct volume_info *volume;
-	int fd;
-};
-
-struct volume_info
-{
-	struct volume_info *next;
-	struct ubi_device_info *ubi_device;
-	struct volume_fd *fds;
-	struct erase_block_info *erase_blocks;
-	const char *device_file_name;
-	struct ubi_vol_info info;
-};
-
-struct ubi_device_info
-{
-	struct volume_info *volumes;
-	const char *device_file_name;
-	struct ubi_dev_info info;
-};
-
-struct open_volume_fd
-{
-	struct open_volume_fd *next;
-	struct volume_fd *vol_fd;
-};
-
-#define MAX_UBI_DEVICES 64
-
-static libubi_t libubi;
-
-static struct ubi_info info;
-static struct ubi_device_info ubi_array[MAX_UBI_DEVICES];
-
-static uint64_t total_written = 0;
-static uint64_t total_space = 0;
-
-static struct open_volume_fd *open_volumes;
-static size_t open_volume_count = 0;
-
-static const char *ubi_module_load_string;
-
-static unsigned char *write_buffer = NULL;
-static unsigned char *read_buffer = NULL;
-
-static long long max_ebs_per_vol = 0; /* max number of ebs per vol (zero => no max) */
-
-static unsigned long next_seed = 1;
-
-static unsigned get_next_seed()
-{
-	next_seed = next_seed * 1103515245 + 12345;
-	return ((unsigned) (next_seed / 65536) % 32768);
-}
-
-static void error_exit(const char *msg)
-{
-	int eno = errno;
-	fprintf(stderr,"UBI Integrity Test Error: %s\n",msg);
-	if (eno) {
-		fprintf(stderr, "errno = %d\n", eno);
-		fprintf(stderr, "strerror = %s\n", strerror(eno));
-	}
-	exit(1);
-}
-
-static void *allocate(size_t n)
-{
-	void *p = malloc(n);
-	if (!p)
-		error_exit("Memory allocation failure");
-	memset(p, 0, n);
-	return p;
-}
-
-static unsigned get_random_number(unsigned n)
-{
-	uint64_t r, b;
-
-	if (n < 1)
-		return 0;
-	r = rand();
-	r *= n;
-	b = RAND_MAX;
-	b += 1;
-	r /= b;
-	return r;
-}
-
-static struct volume_fd *open_volume(struct volume_info *vol)
-{
-	struct volume_fd *s;
-	struct open_volume_fd *ofd;
-	int fd;
-
-	if (vol->fds) {
-		/* If already open dup it */
-		fd = dup(vol->fds->fd);
-		if (fd == -1)
-			error_exit("Failed to dup volume device file des");
-	} else {
-		fd = open(vol->device_file_name, O_RDWR | O_LARGEFILE);
-		if (fd == -1)
-			error_exit("Failed to open volume device file");
-	}
-	s = allocate(sizeof(*s));
-	s->fd = fd;
-	s->volume = vol;
-	s->next = vol->fds;
-	vol->fds = s;
-	/* Add to open volumes list */
-	ofd = allocate(sizeof(*ofd));
-	ofd->vol_fd = s;
-	ofd->next = open_volumes;
-	open_volumes = ofd;
-	open_volume_count += 1;
-	return 0;
-}
-
-static void close_volume(struct volume_fd *vol_fd)
-{
-	struct volume_fd *vfd, *vfd_last;
-	struct open_volume_fd *ofd, *ofd_last;
-	int fd = vol_fd->fd;
-
-	/* Remove from open volumes list */
-	ofd_last = NULL;
-	ofd = open_volumes;
-	while (ofd) {
-		if (ofd->vol_fd == vol_fd) {
-			if (ofd_last)
-				ofd_last->next = ofd->next;
-			else
-				open_volumes = ofd->next;
-			free(ofd);
-			open_volume_count -= 1;
-			break;
-		}
-		ofd_last = ofd;
-		ofd = ofd->next;
-	}
-	/* Remove from volume fd list */
-	vfd_last = NULL;
-	vfd = vol_fd->volume->fds;
-	while (vfd) {
-		if (vfd == vol_fd) {
-			if (vfd_last)
-				vfd_last->next = vfd->next;
-			else
-				vol_fd->volume->fds = vfd->next;
-			free(vfd);
-			break;
-		}
-		vfd_last = vfd;
-		vfd = vfd->next;
-	}
-	/* Close volume device file */
-	if (close(fd) == -1)
-		error_exit("Failed to close volume file descriptor");
-}
-
-static void set_random_data(unsigned seed, unsigned char *buf, int size)
-{
-	int i;
-	unsigned r;
-
-	r = rand();
-	srand(seed);
-	for (i = 0; i < size; ++i)
-		buf[i] = rand();
-	srand(r);
-}
-
-#if 0
-static void print_write_info(struct write_info *w)
-{
-	printf("Offset: %lld  Size:%d  Seed:%u\n", w->offset, w->size, w->random_seed);
-	fflush(stdout);
-}
-#endif
-
-static void check_erase_block(struct erase_block_info *erase_block, int fd)
-{
-	struct write_info *w;
-	off64_t gap_end;
-	int eb_size = erase_block->volume->info.eb_size;
-	ssize_t bytes_read;
-
-	w = erase_block->writes;
-	gap_end = erase_block->offset + eb_size;
-	while (w) {
-		if (w->offset + w->size < gap_end) {
-			/* There is a gap. Check all 0xff */
-			off64_t gap_start = w->offset + w->size;
-			size_t size = gap_end - gap_start;
-			if (lseek64(fd, gap_start, SEEK_SET) != gap_start)
-				error_exit("lseek64 failed");
-			memset(read_buffer, 0 , size);
-			errno = 0;
-			bytes_read = read(fd, read_buffer, size);
-			if (bytes_read != size)
-				error_exit("read failed in gap");
-			while (size)
-				if (read_buffer[--size] != 0xff) {
-					fprintf(stderr, "block no. = %d\n" , erase_block->block_number);
-					fprintf(stderr, "offset = %lld\n" , (long long) gap_start);
-					fprintf(stderr, "size = %ld\n" , (long) bytes_read);
-					error_exit("verify 0xff failed");
-				}
-		}
-		if (lseek64(fd, w->offset, SEEK_SET) != w->offset)
-			error_exit("lseek64 failed");
-		memset(read_buffer, 0 , w->size);
-		errno = 0;
-		bytes_read = read(fd, read_buffer, w->size);
-		if (bytes_read != w->size) {
-			fprintf(stderr, "offset = %lld\n" , (long long) w->offset);
-			fprintf(stderr, "size = %ld\n" , (long) w->size);
-			fprintf(stderr, "bytes_read = %ld\n" , (long) bytes_read);
-			error_exit("read failed");
-		}
-		set_random_data(w->random_seed, write_buffer, w->size);
-		if (memcmp(read_buffer, write_buffer, w->size))
-			error_exit("verify failed");
-		gap_end = w->offset;
-		w = w->next;
-	}
-	if (gap_end > erase_block->offset) {
-		/* Check all 0xff */
-		off64_t gap_start = erase_block->offset;
-		size_t size = gap_end - gap_start;
-		if (lseek64(fd, gap_start, SEEK_SET) != gap_start)
-			error_exit("lseek64 failed");
-		memset(read_buffer, 0 , size);
-		errno = 0;
-		bytes_read = read(fd, read_buffer, size);
-		if (bytes_read != size)
-			error_exit("read failed in gap");
-		while (size)
-			if (read_buffer[--size] != 0xff) {
-				fprintf(stderr, "block no. = %d\n" , erase_block->block_number);
-				fprintf(stderr, "offset = %lld\n" , (long long) gap_start);
-				fprintf(stderr, "size = %ld\n" , (long) bytes_read);
-				error_exit("verify 0xff failed!");
-			}
-	}
-}
-
-static int write_to_erase_block(struct erase_block_info *erase_block, int fd)
-{
-	int page_size = erase_block->volume->ubi_device->info.min_io_size;
-	int eb_size = erase_block->volume->info.eb_size;
-	int next_offset = 0;
-	int space, size;
-	off64_t offset;
-	unsigned seed;
-	struct write_info *w;
-
-	if (erase_block->writes)
-		next_offset = erase_block->writes->offset_within_block + erase_block->writes->size;
-	space = eb_size - next_offset;
-	if (space <= 0)
-		return 0; /* No space */
-	if (!get_random_number(10)) {
-		/* 1 time in 10 leave a gap */
-		next_offset += get_random_number(space);
-		next_offset = (next_offset / page_size) * page_size;
-		space = eb_size - next_offset;
-	}
-	if (get_random_number(2))
-		size = 1 * page_size;
-	else if (get_random_number(2))
-		size = 2 * page_size;
-	else if (get_random_number(2))
-		size = 3 * page_size;
-	else if (get_random_number(2))
-		size = 4 * page_size;
-	else {
-		if (get_random_number(4))
-			size = get_random_number(space);
-		else
-			size = space;
-		size = (size / page_size) * page_size;
-	}
-	if (size == 0 || size > space)
-		size = page_size;
-	if (next_offset + size > eb_size)
-		error_exit("internal error");
-	offset = erase_block->offset + next_offset;
-	if (offset < erase_block->top_of_data)
-		error_exit("internal error!");
-	if (lseek64(fd, offset, SEEK_SET) != offset)
-		error_exit("lseek64 failed");
-	/* Do write */
-	seed = get_next_seed();
-	if (!seed)
-		seed = 1;
-	set_random_data(seed, write_buffer, size);
-	if (write(fd, write_buffer, size) != size)
-		error_exit("write failed");
-	erase_block->top_of_data = offset + size;
-	/* Make write info and add to eb */
-	w = allocate(sizeof(*w));
-	w->offset_within_block = next_offset;
-	w->offset = offset;
-	w->size = size;
-	w->random_seed = seed;
-	w->next = erase_block->writes;
-	erase_block->writes = w;
-	erase_block->touched = 1;
-	erase_block->erased = 0;
-	total_written += size;
-	return 1;
-}
-
-static void erase_erase_block(struct erase_block_info *erase_block, int fd)
-{
-	struct write_info *w;
-	uint32_t eb_no;
-	int res;
-
-	eb_no = erase_block->block_number;
-	res = ioctl(fd, UBI_IOCEBER, &eb_no);
-	if (res)
-		error_exit("Failed to erase an erase block");
-	/* Remove writes from this eb */
-	while (erase_block->writes) {
-		w = erase_block->writes;
-		erase_block->writes = erase_block->writes->next;
-		free(w);
-	}
-	erase_block->erased = 1;
-	erase_block->touched = 1;
-	erase_block->top_of_data = erase_block->offset;
-}
-
-static void operate_on_erase_block(struct erase_block_info *erase_block, int fd)
-{
-	/*
-	Possible operations:
-		read from it and verify
-		write to it
-		erase it
-	*/
-	int work_done = 1;
-	static int no_work_done_count = 0;
-
-	if (!get_random_number(10) && no_work_done_count <= 5) {
-		check_erase_block(erase_block, fd);
-		work_done = 0;
-	} else if (get_random_number(100)) {
-		if (!write_to_erase_block(erase_block, fd)) {
-			/* The erase block was full */
-			if (get_random_number(2) || no_work_done_count > 5)
-				erase_erase_block(erase_block, fd);
-			else
-				work_done = 0;
-		}
-	} else
-		erase_erase_block(erase_block, fd);
-	if (work_done)
-		no_work_done_count = 0;
-	else
-		no_work_done_count += 1;
-}
-
-static void operate_on_open_volume(struct volume_fd *vol_fd)
-{
-	/*
-	Possible operations:
-		operate on an erase block
-		close volume
-	*/
-	if (get_random_number(100) == 0)
-		close_volume(vol_fd);
-	else {
-		/* Pick an erase block at random */
-		int eb_no = get_random_number(vol_fd->volume->info.rsvd_ebs);
-		operate_on_erase_block(&vol_fd->volume->erase_blocks[eb_no], vol_fd->fd);
-	}
-}
-
-static void operate_on_volume(struct volume_info *vol)
-{
-	/*
-	Possible operations:
-		open it
-		resize it (must close fd's first) <- TODO
-		delete it (must close fd's first) <- TODO
-	*/
-	open_volume(vol);
-}
-
-static int ubi_major(const char *device_file_name)
-{
-	struct stat buf;
-	static int maj = 0;
-
-	if (maj)
-		return maj;
-	if (stat(device_file_name, &buf) == -1)
-		error_exit("Failed to stat ubi device file");
-	maj = major(buf.st_rdev);
-	return maj;
-}
-
-static void operate_on_ubi_device(struct ubi_device_info *ubi_device)
-{
-	/*
-	TODO:
-	Possible operations:
-		create a new volume
-		operate on existing volume
-	*/
-	/*
-	Simplified operation (i.e. only have 1 volume):
-		If there are no volumes create 1 volumne
-		Then operate on the volume
-	*/
-	if (ubi_device->info.vol_count == 0) {
-		/* Create the one-and-only volume we will use */
-		char dev_name[1024];
-		int i, n, maj, fd;
-		struct volume_info *s;
-		struct ubi_mkvol_request req;
-
-		req.vol_id = UBI_VOL_NUM_AUTO;
-		req.alignment = 1; /* TODO: What is this? */
-		req.bytes = ubi_device->info.eb_size * max_ebs_per_vol;
-		if (req.bytes == 0 || req.bytes > ubi_device->info.avail_bytes)
-			req.bytes = ubi_device->info.avail_bytes;
-		req.vol_type = UBI_DYNAMIC_VOLUME;
-		req.name = "integ-test-vol";
-		if (ubi_mkvol(libubi, ubi_device->device_file_name, &req))
-			error_exit("ubi_mkvol failed");
-		s = allocate(sizeof(*s));
-		s->ubi_device = ubi_device;
-		if (ubi_get_vol_info1(libubi, ubi_device->info.dev_num, req.vol_id, &s->info))
-			error_exit("ubi_get_vol_info failed");
-		n = s->info.rsvd_ebs;
-		s->erase_blocks = allocate(sizeof(struct erase_block_info) * n);
-		for (i = 0; i < n; ++i) {
-			s->erase_blocks[i].volume = s;
-			s->erase_blocks[i].block_number = i;
-			s->erase_blocks[i].offset = i * (off64_t) s->info.eb_size;
-			s->erase_blocks[i].top_of_data = s->erase_blocks[i].offset;
-		}
-		/* FIXME: Correctly get device file name */
-		sprintf(dev_name, "%s_%d", ubi_device->device_file_name, req.vol_id);
-		s->device_file_name = strdup(dev_name);
-		ubi_device->volumes = s;
-		ubi_device->info.vol_count += 1;
-		sleep(1);
-		fd = open(s->device_file_name, O_RDONLY);
-		if (fd == -1) {
-			/* FIXME: Correctly make node */
-			maj = ubi_major(ubi_device->device_file_name);
-			sprintf(dev_name, "mknod %s c %d %d", s->device_file_name, maj, req.vol_id + 1);
-			system(dev_name);
-		} else if (close(fd) == -1)
-			error_exit("Failed to close volume device file");
-	}
-	operate_on_volume(ubi_device->volumes);
-}
-
-static void do_an_operation(void)
-{
-	int too_few = (open_volume_count < info.dev_count * 3);
-	int too_many = (open_volume_count > info.dev_count * 5);
-
-	if (too_many || (!too_few && get_random_number(1000) > 0)) {
-		/* Operate on an open volume */
-		size_t pos;
-		struct open_volume_fd *ofd;
-		pos = get_random_number(open_volume_count);
-		for (ofd = open_volumes; pos && ofd && ofd->next; --pos)
-			ofd = ofd->next;
-		operate_on_open_volume(ofd->vol_fd);
-	} else if (info.dev_count > 0) {
-		/* Operate on a ubi device */
-		size_t ubi_pos = 0;
-		if (info.dev_count > 1)
-			ubi_pos = get_random_number(info.dev_count - 1);
-		operate_on_ubi_device(&ubi_array[ubi_pos]);
-	} else
-		error_exit("Internal error");
-}
-
-static void get_ubi_devices_info(void)
-{
-	int i, ubi_pos = 0;
-	char dev_name[1024];
-	size_t buf_size = 1024 * 128;
-
-	if (ubi_get_info(libubi, &info))
-		error_exit("ubi_get_info failed");
-	if (info.dev_count > MAX_UBI_DEVICES)
-		error_exit("Too many ubi devices");
-	for (i = info.lowest_dev_num; i <= info.highest_dev_num; ++i) {
-		struct ubi_device_info *s;
-		s = &ubi_array[ubi_pos++];
-		if (ubi_get_dev_info1(libubi, i, &s->info))
-			error_exit("ubi_get_dev_info1 failed");
-		if (s->info.vol_count)
-			error_exit("There are existing volumes");
-		/* FIXME: Correctly get device file name */
-		sprintf(dev_name, "/dev/ubi%d", i);
-		s->device_file_name = strdup(dev_name);
-		if (buf_size < s->info.eb_size)
-			buf_size = s->info.eb_size;
-		if (max_ebs_per_vol && s->info.eb_size * max_ebs_per_vol < s->info.avail_bytes)
-			total_space += s->info.eb_size * max_ebs_per_vol;
-		else
-			total_space += s->info.avail_bytes;
-	}
-	write_buffer = allocate(buf_size);
-	read_buffer = allocate(buf_size);
-}
-
-static void load_ubi(void)
-{
-	system("rmmod ubi");
-	if (system(ubi_module_load_string) != 0)
-		error_exit("Failed to load UBI module");
-	sleep(1);
-}
-
-static void do_some_operations(void)
-{
-	unsigned i = 0;
-	total_written = 0;
-	printf("Total space: %llu\n", (unsigned long long) total_space);
-	while (total_written < total_space * 3) {
-		do_an_operation();
-		if (i++ % 10000 == 0)
-			printf("Total written: %llu\n", (unsigned long long) total_written);
-	}
-	printf("Total written: %llu\n", (unsigned long long) total_written);
-}
-
-static void reload_ubi(void)
-{
-	/* Remove module */
-	if (system("rmmod ubi") != 0)
-		error_exit("Failed to remove UBI module");
-	/* Install module */
-	if (system(ubi_module_load_string) != 0)
-		error_exit("Failed to load UBI module");
-	sleep(1);
-}
-
-static void check_volume(struct volume_info *vol)
-{
-	struct erase_block_info *eb = vol->erase_blocks;
-	int pos;
-	int fd;
-
-	fd = open(vol->device_file_name, O_RDWR | O_LARGEFILE);
-	if (fd == -1)
-		error_exit("Failed to open volume device file");
-	for (pos = 0; pos < vol->info.rsvd_ebs; ++pos)
-		check_erase_block(eb++, fd);
-	if (close(fd) == -1)
-		error_exit("Failed to close volume device file");
-}
-
-static void check_ubi_device(struct ubi_device_info *ubi_device)
-{
-	struct volume_info *vol;
-
-	vol = ubi_device->volumes;
-	while (vol) {
-		check_volume(vol);
-		vol = vol->next;
-	}
-}
-
-static void check_ubi(void)
-{
-	int i;
-
-	for (i = 0; i < info.dev_count; ++i)
-		check_ubi_device(&ubi_array[i]);
-}
-
-static int is_all_digits(const char *s)
-{
-	const char *digits = "0123456789";
-	if (!s || !*s)
-		return 0;
-	for (;*s;++s)
-		if (!strchr(digits,*s))
-			return 0;
-	return 1;
-}
-
-static int get_short_arg(int *pos,const char *name,long long *result,int argc,char *argv[])
-{
-	const char *p = NULL;
-	int i = *pos;
-	size_t n = strlen(name);
-
-	if (strlen(argv[i]) > n)
-		p = argv[i] + n;
-	else if (++i < argc)
-		p = argv[i];
-	if (!is_all_digits(p))
-		return 1;
-	*result = atoll(p);
-	*pos = i;
-	return 0;
-}
-
-static int get_long_arg(int *pos,const char *name,long long *result,int argc,char *argv[])
-{
-	const char *p = NULL;
-	int i = *pos;
-	size_t n = strlen(name);
-
-	if (strlen(argv[i]) > n)
-		p = argv[i] + n;
-	else if (++i < argc)
-		p = argv[i];
-	if (p && *p == '=') {
-		p += 1;
-		if (!*p && ++i < argc)
-			p = argv[i];
-	}
-	if (!is_all_digits(p))
-		return 1;
-	*result = atoll(p);
-	*pos = i;
-	return 0;
-}
-
-static int remove_all_volumes(void)
-{
-	int i;
-
-	for (i = 0; i < info.dev_count; ++i) {
-		struct ubi_device_info *ubi_device = &ubi_array[i];
-		struct volume_info *vol;
-		vol = ubi_device->volumes;
-		while (vol) {
-			int res = ubi_rmvol(libubi,
-					    ubi_device->device_file_name,
-					    vol->info.vol_id);
-			if (res)
-				return res;
-			vol = vol->next;
-		}
-	}
-	return 0;
-}
-
-int main(int argc,char *argv[])
-{
-	int i;
-	long long r, repeat = 1;
-	int initial_seed = 1, args_ok = 1;
-
-	printf("UBI Integrity Test\n");
-
-	/* Get arguments */
-	ubi_module_load_string = 0;
-	for (i = 1; i < argc; ++i) {
-		if (strncmp(argv[i], "-h", 2) == 0)
-			args_ok = 0;
-		else if (strncmp(argv[i], "--help", 6) == 0)
-			args_ok = 0;
-		else if (strncmp(argv[i], "-n", 2) == 0) {
-			if (get_short_arg(&i, "-n", &repeat, argc, argv))
-				args_ok = 0;
-		} else if (strncmp(argv[i], "--repeat", 8) == 0) {
-			if (get_long_arg(&i, "--repeat", &repeat, argc, argv))
-				args_ok = 0;
-		} else if (strncmp(argv[i], "-m", 2) == 0) {
-			if (get_short_arg(&i,"-m", &max_ebs_per_vol, argc, argv))
-				args_ok = 0;
-		} else if (strncmp(argv[i], "--maxebs", 8) == 0) {
-			if (get_long_arg(&i, "--maxebs", &max_ebs_per_vol, argc, argv))
-				args_ok = 0;
-		} else if (!ubi_module_load_string)
-			ubi_module_load_string = argv[i];
-		else
-			args_ok = 0;
-	}
-	if (!args_ok || !ubi_module_load_string) {
-		fprintf(stderr, "Usage is: ubi_integ [<options>] <UBI Module load command>\n");
-		fprintf(stderr, "    Options: \n");
-		fprintf(stderr, "        -h, --help              Help\n");
-		fprintf(stderr, "        -n arg, --repeat=arg    Repeat test arg times\n");
-		fprintf(stderr, "        -m arg, --maxebs=arg    Max no. of erase blocks\n");
-		return 1;
-	}
-
-	initial_seed = getpid();
-	printf("Initial seed = %u\n", (unsigned) initial_seed);
-	next_seed = initial_seed;
-	srand(initial_seed);
-	load_ubi();
-
-	libubi = libubi_open();
-	if (!libubi)
-		error_exit("Failed to open libubi");
-
-	get_ubi_devices_info();
-
-	r = 0;
-	while (repeat == 0 || r++ < repeat) {
-		printf("Cycle %lld\n", r);
-		do_some_operations();
-
-		/* Close all volumes */
-		while (open_volumes)
-			close_volume(open_volumes->vol_fd);
-
-		check_ubi();
-
-		libubi_close(libubi);
-
-		reload_ubi();
-
-		libubi = libubi_open();
-		if (!libubi)
-			error_exit("Failed to open libubi");
-
-		check_ubi();
-	}
-
-	if (remove_all_volumes())
-		error_exit("Failed to remove all volumes");
-
-	libubi_close(libubi);
-
-	printf("UBI Integrity Test completed ok\n");
-	return 0;
-}
diff --git a/ubi-utils/tests/io_basic.c b/ubi-utils/tests/io_basic.c
deleted file mode 100644
index 2e8809a..0000000
--- a/ubi-utils/tests/io_basic.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test basic UBI volume I/O capabilities.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "io_basic"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_basic(int type);
-static int test_aligned(int type);
-
-int main(int argc, char * const argv[])
-{
-	if (initial_check(argc, argv))
-		return 1;
-
-	node = argv[1];
-
-	libubi = libubi_open();
-	if (libubi == NULL) {
-		failed("libubi_open");
-		return 1;
-	}
-
-	if (ubi_get_dev_info(libubi, node, &dev_info)) {
-		failed("ubi_get_dev_info");
-		goto close;
-	}
-
-	if (test_basic(UBI_DYNAMIC_VOLUME))
-		goto close;
-	if (test_basic(UBI_STATIC_VOLUME))
-		goto close;
-	if (test_aligned(UBI_DYNAMIC_VOLUME))
-		goto close;
-	if (test_aligned(UBI_STATIC_VOLUME))
-		goto close;
-
-	libubi_close(libubi);
-	return 0;
-
-close:
-	libubi_close(libubi);
-	return 1;
-}
-
-/**
- * test_basic - check basic volume read and update capabilities.
- *
- * @type  volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_basic(int type)
-{
-	struct ubi_mkvol_request req;
-	const char *name = TESTNAME ":test_basic()";
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-
-	req.vol_id = UBI_VOL_NUM_AUTO;
-	req.alignment = 1;
-	req.bytes = dev_info.avail_bytes;
-	req.vol_type = type;
-	req.name = name;
-
-	if (ubi_mkvol(libubi, node, &req)) {
-		failed("ubi_mkvol");
-		return -1;
-	}
-
-	sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num, req.vol_id);
-
-	/* Make sure newly created volume contains only 0xFF bytes */
-	if (check_vol_patt(&vol_node[0], 0xFF))
-		goto remove;
-
-	/* Write 0xA5 bytes to the volume */
-	if (update_vol_patt(&vol_node[0], dev_info.avail_bytes, 0xA5))
-		goto remove;
-	if (check_vol_patt(&vol_node[0], 0xA5))
-		goto remove;
-
-	if (ubi_rmvol(libubi, node, req.vol_id)) {
-		failed("ubi_rmvol");
-		return -1;
-	}
-
-	return 0;
-
-remove:
-	ubi_rmvol(libubi, node, req.vol_id);
-	return -1;
-}
-
-/**
- * test_aligned - test volume alignment feature.
- *
- * @type  volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_aligned(int type)
-{
-	int i, ebsz;
-	struct ubi_mkvol_request req;
-	const char *name = TESTNAME ":test_aligned()";
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-	int alignments[] = ALIGNMENTS(dev_info.eb_size);
-
-	req.vol_type = type;
-	req.name = name;
-
-	for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
-		req.vol_id = UBI_VOL_NUM_AUTO;
-
-		req.alignment = alignments[i];
-		req.alignment -= req.alignment % dev_info.min_io_size;
-		if (req.alignment == 0)
-			req.alignment = dev_info.min_io_size;
-
-		ebsz = dev_info.eb_size - dev_info.eb_size % req.alignment;
-		req.bytes = MIN_AVAIL_EBS * ebsz;
-
-		if (ubi_mkvol(libubi, node, &req)) {
-			failed("ubi_mkvol");
-			return -1;
-		}
-
-		sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num, req.vol_id);
-
-		/* Make sure newly created volume contains only 0xFF bytes */
-		if (check_vol_patt(&vol_node[0], 0xFF))
-			goto remove;
-
-		/* Write 0xA5 bytes to the volume */
-		if (update_vol_patt(&vol_node[0], req.bytes, 0xA5))
-			goto remove;
-		if (check_vol_patt(&vol_node[0], 0xA5))
-			goto remove;
-
-		if (ubi_rmvol(libubi, node, req.vol_id)) {
-			failed("ubi_rmvol");
-			return -1;
-		}
-	}
-
-	return 0;
-
-remove:
-	ubi_rmvol(libubi, node, req.vol_id);
-	return -1;
-}
diff --git a/ubi-utils/tests/io_paral.c b/ubi-utils/tests/io_paral.c
deleted file mode 100644
index 4857bf8..0000000
--- a/ubi-utils/tests/io_paral.c
+++ /dev/null
@@ -1,251 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * This test does a lot of I/O to volumes in parallel.
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <string.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <pthread.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "io_paral"
-#include "common.h"
-
-#define THREADS_NUM 3
-#define ITERATIONS  100
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-static int iterations = ITERATIONS;
-int total_bytes;
-
-static void * the_thread(void *ptr);
-
-static long long memory_limit(void)
-{
-	long long result = 0;
-	FILE *f;
-
-	f = fopen("/proc/meminfo", "r");
-	if (!f)
-		return 0;
-	fscanf(f, "%*s %lld", &result);
-	fclose(f);
-	return result * 1024 / 4;
-}
-
-int main(int argc, char * const argv[])
-{
-	int i, ret;
-	pthread_t threads[THREADS_NUM];
-	struct ubi_mkvol_request req;
-	long long mem_limit;
-
-	if (initial_check(argc, argv))
-		return 1;
-
-	node = argv[1];
-
-	libubi = libubi_open();
-	if (libubi == NULL) {
-		failed("libubi_open");
-		return 1;
-	}
-
-	if (ubi_get_dev_info(libubi, node, &dev_info)) {
-		failed("ubi_get_dev_info");
-		goto close;
-	}
-
-	req.alignment = 1;
-	mem_limit = memory_limit();
-	if (mem_limit && mem_limit < dev_info.avail_bytes)
-		total_bytes = req.bytes =
-				(mem_limit / dev_info.eb_size / THREADS_NUM)
-				* dev_info.eb_size;
-	else
-		total_bytes = req.bytes =
-				((dev_info.avail_ebs - 3) / THREADS_NUM)
-				* dev_info.eb_size;
-	for (i = 0; i < THREADS_NUM; i++) {
-		char name[100];
-
-		req.vol_id = i;
-		sprintf(&name[0], TESTNAME":%d", i);
-		req.name = &name[0];
-		req.vol_type = (i & 1) ? UBI_STATIC_VOLUME : UBI_DYNAMIC_VOLUME;
-
-		if (ubi_mkvol(libubi, node, &req)) {
-			failed("ubi_mkvol");
-			goto remove;
-		}
-	}
-
-	/* Create one volume with static data to make WL work more */
-	req.vol_id = THREADS_NUM;
-	req.name = TESTNAME ":static";
-	req.vol_type = UBI_DYNAMIC_VOLUME;
-	req.bytes = 3*dev_info.eb_size;
-	if (ubi_mkvol(libubi, node, &req)) {
-		failed("ubi_mkvol");
-		goto remove;
-	}
-
-	for (i = 0; i < THREADS_NUM; i++) {
-		ret = pthread_create(&threads[i], NULL, &the_thread, (void*)i);
-		if (ret) {
-			failed("pthread_create");
-			goto remove;
-		}
-	}
-
-	for (i = 0; i < THREADS_NUM; i++)
-		pthread_join(threads[i], NULL);
-
-	for (i = 0; i <= THREADS_NUM; i++) {
-		if (ubi_rmvol(libubi, node, i)) {
-			failed("ubi_rmvol");
-			goto remove;
-		}
-	}
-
-	libubi_close(libubi);
-	return 0;
-
-remove:
-	for (i = 0; i <= THREADS_NUM; i++)
-		ubi_rmvol(libubi, node, i);
-
-close:
-	libubi_close(libubi);
-	return 1;
-}
-
-/**
- * the_thread - the testing thread.
- *
- * @ptr  thread number
- */
-static void * the_thread(void *ptr)
-{
-	int fd, iter = iterations, vol_id = (int)ptr;
-	unsigned char *wbuf, *rbuf;
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-
-	wbuf = malloc(total_bytes);
-	rbuf = malloc(total_bytes);
-	if (!wbuf || !rbuf) {
-		failed("malloc");
-		goto free;
-	}
-
-	sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num, vol_id);
-
-	while (iter--) {
-		int i, ret, written = 0, rd = 0;
-		int bytes = (random() % (total_bytes - 1)) + 1;
-
-		fd = open(vol_node, O_RDWR);
-		if (fd == -1) {
-			failed("open");
-			err_msg("cannot open \"%s\"\n", node);
-			goto free;
-		}
-
-		for (i = 0; i < bytes; i++)
-			wbuf[i] = random() % 255;
-		memset(rbuf, '\0', bytes);
-
-		do {
-			ret = ubi_update_start(libubi, fd, bytes);
-			if (ret && errno != EBUSY) {
-				failed("ubi_update_start");
-				err_msg("vol_id %d", vol_id);
-				goto close;
-			}
-		} while (ret);
-
-		while (written < bytes) {
-			int to_write = random() % (bytes - written);
-
-			if (to_write == 0)
-				to_write = 1;
-
-			ret = write(fd, wbuf, to_write);
-			if (ret != to_write) {
-				failed("write");
-				err_msg("failed to write %d bytes at offset %d "
-					"of volume %d", to_write, written,
-					vol_id);
-				err_msg("update: %d bytes", bytes);
-				goto close;
-			}
-
-			written += to_write;
-		}
-
-		close(fd);
-
-		fd = open(vol_node, O_RDONLY);
-		if (fd == -1) {
-			failed("open");
-			err_msg("cannot open \"%s\"\n", node);
-			goto free;
-		}
-
-		/* read data back and check */
-		while (rd < bytes) {
-			int to_read = random() % (bytes - rd);
-
-			if (to_read == 0)
-				to_read = 1;
-
-			ret = read(fd, rbuf, to_read);
-			if (ret != to_read) {
-				failed("read");
-				err_msg("failed to read %d bytes at offset %d "
-					"of volume %d", to_read, rd, vol_id);
-				goto close;
-			}
-
-			rd += to_read;
-		}
-
-		close(fd);
-
-	}
-
-	free(wbuf);
-	free(rbuf);
-	return NULL;
-
-close:
-	close(fd);
-free:
-	free(wbuf);
-	free(rbuf);
-	return NULL;
-}
diff --git a/ubi-utils/tests/io_read.c b/ubi-utils/tests/io_read.c
deleted file mode 100644
index c5d1da7..0000000
--- a/ubi-utils/tests/io_read.c
+++ /dev/null
@@ -1,398 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test UBI volume read.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "io_basic"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_static(void);
-static int test_read(int type);
-
-int main(int argc, char * const argv[])
-{
-	if (initial_check(argc, argv))
-		return 1;
-
-	node = argv[1];
-
-	libubi = libubi_open();
-	if (libubi == NULL) {
-		failed("libubi_open");
-		return 1;
-	}
-
-	if (ubi_get_dev_info(libubi, node, &dev_info)) {
-		failed("ubi_get_dev_info");
-		goto close;
-	}
-
-	if (test_static())
-		goto close;
-	if (test_read(UBI_DYNAMIC_VOLUME))
-		goto close;
-	if (test_read(UBI_STATIC_VOLUME))
-		goto close;
-
-	libubi_close(libubi);
-	return 0;
-
-close:
-	libubi_close(libubi);
-	return 1;
-}
-
-/**
- * test_static - test static volume-specific features.
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_static(void)
-{
-	struct ubi_mkvol_request req;
-	const char *name = TESTNAME ":io_basic()";
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-	struct ubi_vol_info vol_info;
-	int fd, ret;
-	char buf[20];
-
-	req.vol_id = UBI_VOL_NUM_AUTO;
-	req.alignment = 1;
-	req.bytes = dev_info.avail_bytes;
-	req.vol_type = UBI_STATIC_VOLUME;
-	req.name = name;
-
-	if (ubi_mkvol(libubi, node, &req)) {
-		failed("ubi_mkvol");
-		return -1;
-	}
-
-	sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num, req.vol_id);
-
-	fd = open(vol_node, O_RDWR);
-	if (fd == -1) {
-		failed("open");
-		err_msg("cannot open \"%s\"\n", node);
-		goto remove;
-	}
-
-	if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
-		failed("ubi_get_vol_info");
-		goto close;
-	}
-
-	/* Make sure new static volume contains no data */
-	if (vol_info.data_bytes != 0) {
-		err_msg("data_bytes = %lld, not zero", vol_info.data_bytes);
-		goto close;
-	}
-
-	/* Ensure read returns EOF */
-	ret = read(fd, &buf[0], 1);
-	if (ret < 0) {
-		failed("read");
-		goto close;
-	}
-	if (ret != 0) {
-		err_msg("read data from free static volume");
-		goto close;
-	}
-
-	if (ubi_update_start(libubi, fd, 10)) {
-		failed("ubi_update_start");
-		goto close;
-	}
-
-	ret = write(fd, &buf[0], 10);
-	if (ret < 0) {
-		failed("write");
-		goto close;
-	}
-	if (ret != 10) {
-		err_msg("written %d bytes", ret);
-		goto close;
-	}
-
-	if (lseek(fd, 0, SEEK_SET) != 0) {
-		failed("seek");
-		goto close;
-	}
-	ret = read(fd, &buf[0], 20);
-	if (ret < 0) {
-		failed("read");
-		goto close;
-	}
-	if (ret != 10) {
-		err_msg("read %d bytes", ret);
-		goto close;
-	}
-
-	close(fd);
-	if (ubi_rmvol(libubi, node, req.vol_id)) {
-		failed("ubi_rmvol");
-		return -1;
-	}
-
-	return 0;
-
-close:
-	close(fd);
-remove:
-	ubi_rmvol(libubi, node, req.vol_id);
-	return -1;
-}
-
-static int test_read1(struct ubi_vol_info *vol_info);
-
-/**
- * test_read - test UBI volume reading from different offsets.
- *
- * @type  volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_read(int type)
-{
-	const char *name = TESTNAME ":test_read()";
-	int alignments[] = ALIGNMENTS(dev_info.eb_size);
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-	struct ubi_mkvol_request req;
-	int i;
-
-	for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
-		int eb_size;
-		struct ubi_vol_info vol_info;
-
-		req.vol_id = UBI_VOL_NUM_AUTO;
-		req.vol_type = type;
-		req.name = name;
-
-		req.alignment = alignments[i];
-		req.alignment -= req.alignment % dev_info.min_io_size;
-		if (req.alignment == 0)
-			req.alignment = dev_info.min_io_size;
-
-		eb_size = dev_info.eb_size - dev_info.eb_size % req.alignment;
-		req.bytes =  MIN_AVAIL_EBS * eb_size;
-
-		if (ubi_mkvol(libubi, node, &req)) {
-			failed("ubi_mkvol");
-			return -1;
-		}
-
-		sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
-			req.vol_id);
-
-		if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
-			failed("ubi_get_vol_info");
-			goto remove;
-		}
-
-		if (test_read1(&vol_info)) {
-			err_msg("alignment = %d", req.alignment);
-			goto remove;
-		}
-
-		if (ubi_rmvol(libubi, node, req.vol_id)) {
-			failed("ubi_rmvol");
-			return -1;
-		}
-	}
-
-	return 0;
-
-remove:
-	ubi_rmvol(libubi, node, req.vol_id);
-	return -1;
-}
-
-static int test_read2(const struct ubi_vol_info *vol_info, int len);
-
-static int fd;
-
-/* Data lengthes to test, @io - minimal I/O unit size, @s - eraseblock size */
-#define LENGTHES(io, s)                                                        \
-	{1, (io), (io)+1, 2*(io), 3*(io)-1, 3*(io),                            \
-	 PAGE_SIZE-1, PAGE_SIZE-(io), 2*PAGE_SIZE, 2*PAGE_SIZE-(io),           \
-	 (s)/2-1, (s)/2, (s)/2+1, (s)-1, (s), (s)+1, 2*(s)-(io), 2*(s),        \
-	 2*(s)+(io), 3*(s), 3*(s)+(io)};
-
-/*
- * A helper function for test_read().
- */
-static int test_read1(struct ubi_vol_info *vol_info)
-{
-	int i, written = 0;
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-	int lengthes[] = LENGTHES(dev_info.min_io_size, vol_info->eb_size);
-
-	sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
-		vol_info->vol_id);
-
-	fd = open(vol_node, O_RDWR);
-	if (fd == -1) {
-		failed("open");
-		err_msg("cannot open \"%s\"\n", node);
-		return -1;
-	}
-
-	/* Write some pattern to the volume */
-	if (ubi_update_start(libubi, fd, vol_info->rsvd_bytes)) {
-		failed("ubi_update_start");
-		err_msg("bytes = %lld", vol_info->rsvd_bytes);
-		goto close;
-	}
-
-	while (written < vol_info->rsvd_bytes) {
-		int i, ret;
-		unsigned char buf[512];
-
-		for (i = 0; i < 512; i++)
-			buf[i] = (unsigned char)(written + i);
-
-		ret = write(fd, &buf[0], 512);
-		if (ret == -1) {
-			failed("write");
-			err_msg("written = %d, ret = %d", written, ret);
-			goto close;
-		}
-		written += ret;
-	}
-
-	close(fd);
-
-	if (ubi_get_vol_info(libubi, vol_node, vol_info)) {
-		failed("ubi_get_vol_info");
-		return -1;
-	}
-
-	fd = open(vol_node, O_RDONLY);
-	if (fd == -1) {
-		failed("open");
-		err_msg("cannot open \"%s\"\n", node);
-		return -1;
-	}
-
-	for (i = 0; i < sizeof(lengthes)/sizeof(int); i++) {
-		if (test_read2(vol_info, lengthes[i])) {
-			err_msg("length = %d", lengthes[i]);
-			goto close;
-		}
-	}
-
-	close(fd);
-	return 0;
-
-close:
-	close(fd);
-	return -1;
-}
-
-static int test_read3(const struct ubi_vol_info *vol_info, int len, off_t off);
-
-/*
- * Offsets to test, @io - minimal I/O unit size, @s - eraseblock size, @sz -
- * volume size.
- */
-#define OFFSETS(io, s, sz)                                                     \
-	{0, (io)-1, (io), (io)+1, 2*(io)-1, 2*(io), 3*(io)-1, 3*(io),          \
-	 PAGE_SIZE-1, PAGE_SIZE-(io), 2*PAGE_SIZE, 2*PAGE_SIZE-(io),           \
-	 (s)/2-1, (s)/2, (s)/2+1, (s)-1, (s), (s)+1, 2*(s)-(io), 2*(s),        \
-	 2*(s)+(io), 3*(s), (sz)-(s)-1, (sz)-(io)-1, (sz)-PAGE_SIZE-1};
-
-/*
- * A helper function for test_read1().
- */
-static int test_read2(const struct ubi_vol_info *vol_info, int len)
-{
-	int i;
-	off_t offsets[] = OFFSETS(dev_info.min_io_size, vol_info->eb_size,
-				  vol_info->data_bytes);
-
-	for (i = 0; i < sizeof(offsets)/sizeof(off_t); i++) {
-		if (test_read3(vol_info, len, offsets[i])) {
-			err_msg("offset = %d", offsets[i]);
-			return -1;
-		}
-	}
-
-	return 0;
-}
-
-/*
- * A helper function for test_read2().
- */
-static int test_read3(const struct ubi_vol_info *vol_info, int len, off_t off)
-{
-	int i, len1;
-	unsigned char ck_buf[len], buf[len];
-	off_t new_off;
-
-	if (off + len > vol_info->data_bytes)
-		len1 = vol_info->data_bytes - off;
-	else
-		len1 = len;
-
-	if (lseek(fd, off, SEEK_SET) != off) {
-		failed("seek");
-		err_msg("len = %d", len);
-		return -1;
-	}
-	if (read(fd, &buf[0], len) != len1) {
-		failed("read");
-		err_msg("len = %d", len);
-		return -1;
-	}
-
-	new_off = lseek(fd, 0, SEEK_CUR);
-	if (new_off != off + len1) {
-		if (new_off == -1)
-			failed("lseek");
-		else
-			err_msg("read %d bytes from %lld, but resulting "
-				"offset is %lld", len1, (long long) off, (long long) new_off);
-		return -1;
-	}
-
-	for (i = 0; i < len1; i++)
-		ck_buf[i] = (unsigned char)(off + i);
-
-	if (memcmp(&buf[0], &ck_buf[0], len1)) {
-		err_msg("incorrect data read from offset %lld",
-			(long long)off);
-		err_msg("len = %d", len);
-		return -1;
-	}
-
-	return 0;
-}
diff --git a/ubi-utils/tests/io_update.c b/ubi-utils/tests/io_update.c
deleted file mode 100644
index 2e3422a..0000000
--- a/ubi-utils/tests/io_update.c
+++ /dev/null
@@ -1,370 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test UBI volume update.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "io_update"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_update(int type);
-static int test_update_ff(void);
-
-int main(int argc, char * const argv[])
-{
-	if (initial_check(argc, argv))
-		return 1;
-
-	node = argv[1];
-
-	libubi = libubi_open();
-	if (libubi == NULL) {
-		failed("libubi_open");
-		return 1;
-	}
-
-	if (ubi_get_dev_info(libubi, node, &dev_info)) {
-		failed("ubi_get_dev_info");
-		goto close;
-	}
-
-	if (test_update(UBI_DYNAMIC_VOLUME))
-		goto close;
-	if (test_update(UBI_STATIC_VOLUME))
-		goto close;
-	if (test_update_ff())
-		goto close;
-
-	libubi_close(libubi);
-	return 0;
-
-close:
-	libubi_close(libubi);
-	return 1;
-}
-
-static int test_update1(struct ubi_vol_info *vol_info);
-
-/**
- * test_update - check volume update capabilities.
- *
- * @type  volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * This function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_update(int type)
-{
-	struct ubi_mkvol_request req;
-	const char *name = TESTNAME ":io_update()";
-	int alignments[] = ALIGNMENTS(dev_info.eb_size);
-	struct ubi_vol_info vol_info;
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-	int i;
-
-	for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
-		int eb_size;
-
-		req.vol_id = UBI_VOL_NUM_AUTO;
-		req.vol_type = type;
-		req.name = name;
-
-		req.alignment = alignments[i];
-		req.alignment -= req.alignment % dev_info.min_io_size;
-		if (req.alignment == 0)
-			req.alignment = dev_info.min_io_size;
-
-		eb_size = dev_info.eb_size - dev_info.eb_size % req.alignment;
-		req.bytes =  MIN_AVAIL_EBS * eb_size;
-
-		if (ubi_mkvol(libubi, node, &req)) {
-			failed("ubi_mkvol");
-			return -1;
-		}
-
-		sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
-			req.vol_id);
-		if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
-			failed("ubi_get_vol_info");
-			goto remove;
-		}
-
-		if (test_update1(&vol_info)) {
-			err_msg("alignment = %d", req.alignment);
-			goto remove;
-		}
-
-		if (ubi_rmvol(libubi, node, req.vol_id)) {
-			failed("ubi_rmvol");
-			return -1;
-		}
-	}
-
-	return 0;
-
-remove:
-	ubi_rmvol(libubi, node, req.vol_id);
-	return -1;
-}
-
-#define SEQUENCES(io, s) {           \
-	{3*(s)-(io)-1, 1},           \
-	{512},                       \
-	{666},                       \
-	{2048},                      \
-	{(io), (io), PAGE_SIZE},     \
-	{(io)+1, (io)+1, PAGE_SIZE}, \
-	{PAGE_SIZE},                 \
-	{PAGE_SIZE-1},               \
-	{PAGE_SIZE+(io)},            \
-	{(s)},                       \
-	{(s)-1},                     \
-	{(s)+1},                     \
-	{(io), (s)+1},               \
-	{(s)+(io), PAGE_SIZE},       \
-	{2*(s), PAGE_SIZE},          \
-	{PAGE_SIZE, 2*(s), 1},       \
-	{PAGE_SIZE, 2*(s)},          \
-	{2*(s)-1, 2*(s)-1},          \
-	{3*(s), PAGE_SIZE + 1},      \
-	{1, PAGE_SIZE},              \
-	{(io), (s)}                  \
-}
-#define SEQ_SZ 21
-
-/*
- * test_update1 - helper function for test_update().
- */
-static int test_update1(struct ubi_vol_info *vol_info)
-{
-	int sequences[SEQ_SZ][3] = SEQUENCES(dev_info.min_io_size,
-					     vol_info->eb_size);
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-	unsigned char buf[vol_info->rsvd_bytes];
-	int fd, i, j;
-
-	sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
-		vol_info->vol_id);
-
-	for (i = 0; i < vol_info->rsvd_bytes; i++)
-		buf[i] = (unsigned char)i;
-
-	fd = open(vol_node, O_RDWR);
-	if (fd == -1) {
-		failed("open");
-		err_msg("cannot open \"%s\"\n", node);
-		return -1;
-	}
-
-	for (i = 0; i < SEQ_SZ; i++) {
-		int ret, stop = 0, len;
-		off_t off = 0;
-		unsigned char buf1[vol_info->rsvd_bytes];
-
-		if (ubi_update_start(libubi, fd, vol_info->rsvd_bytes)) {
-			failed("ubi_update_start");
-			goto close;
-		}
-
-		for (j = 0; off < vol_info->rsvd_bytes; j++) {
-			if (!stop) {
-				if (sequences[i][j] != 0)
-					len = sequences[i][j];
-				else
-					stop = 1;
-			}
-
-			ret = write(fd, &buf[off], len);
-			if (ret < 0) {
-				failed("write");
-				err_msg("failed to write %d bytes at offset "
-					"%lld", len, (long long) off);
-				goto close;
-			}
-			if (off + len > vol_info->rsvd_bytes)
-				len = vol_info->rsvd_bytes - off;
-			if (ret != len) {
-				err_msg("failed to write %d bytes at offset "
-					"%lld, wrote %d", len, (long long) off, ret);
-				goto close;
-			}
-			off += len;
-		}
-
-		/* Check data */
-		if ((ret = lseek(fd, SEEK_SET, 0)) != 0) {
-			if (ret < 0)
-				failed("lseek");
-			err_msg("cannot seek to 0");
-			goto close;
-		}
-		memset(&buf1[0], 0x01, vol_info->rsvd_bytes);
-		ret = read(fd, &buf1[0], vol_info->rsvd_bytes + 1);
-		if (ret < 0) {
-			failed("read");
-			err_msg("failed to read %d bytes",
-				vol_info->rsvd_bytes + 1);
-			goto close;
-		}
-		if (ret != vol_info->rsvd_bytes) {
-			err_msg("failed to read %d bytes, read %d",
-				vol_info->rsvd_bytes, ret);
-			goto close;
-		}
-		if (memcmp(&buf[0], &buf1[0], vol_info->rsvd_bytes)) {
-			err_msg("data corruption");
-			goto close;
-		}
-	}
-
-	close(fd);
-	return 0;
-
-close:
-	close(fd);
-	return -1;
-}
-
-/**
- * test_update_ff - check volume with 0xFF data
- *
- * This function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_update_ff(void)
-{
-	struct ubi_mkvol_request req;
-	const char *name = TESTNAME ":io_update()";
-	struct ubi_vol_info vol_info;
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-	int i, fd, ret, types[2];
-	int upd_len = MIN_AVAIL_EBS * dev_info.eb_size;
-	char buf[upd_len], buf1[upd_len];
-
-	for(i = 0; i < MIN_AVAIL_EBS; i++) {
-		if (i % 1)
-			memset(&buf[0], 0xAB, upd_len);
-		else
-			memset(&buf[0], 0xFF, upd_len);
-	}
-
-	types[0] = UBI_DYNAMIC_VOLUME;
-	types[1] = UBI_STATIC_VOLUME;
-
-	for (i = 0; i < 2; i++) {
-		req.vol_id = UBI_VOL_NUM_AUTO;
-		req.vol_type = types[i];
-		req.name = name;
-
-		req.alignment = 1;
-		req.bytes = upd_len;
-
-		if (ubi_mkvol(libubi, node, &req)) {
-			failed("ubi_mkvol");
-			return -1;
-		}
-
-		sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
-			req.vol_id);
-		if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
-			failed("ubi_get_vol_info");
-			goto remove;
-		}
-
-		fd = open(vol_node, O_RDWR);
-		if (fd == -1) {
-			failed("open");
-			err_msg("cannot open \"%s\"\n", node);
-			goto remove;
-		}
-
-		if (ubi_update_start(libubi, fd, upd_len)) {
-			failed("ubi_update_start");
-			goto close;
-		}
-
-
-		ret = write(fd, &buf[0], upd_len);
-		if (ret < 0 || ret != upd_len) {
-			failed("write");
-			err_msg("failed to write %d bytes", upd_len);
-			goto close;
-		}
-
-		/* Check data */
-		if ((ret = lseek(fd, SEEK_SET, 0)) != 0) {
-			if (ret < 0)
-				failed("lseek");
-			err_msg("cannot seek to 0");
-			goto close;
-		}
-
-		close(fd);
-
-		fd = open(vol_node, O_RDWR);
-		if (fd == -1) {
-			failed("open");
-			err_msg("cannot open \"%s\"\n", node);
-			goto remove;
-		}
-
-		memset(&buf1[0], 0x00, upd_len);
-		ret = read(fd, &buf1[0], upd_len);
-		if (ret < 0) {
-			failed("read");
-			err_msg("failed to read %d bytes", upd_len);
-			goto close;
-		}
-		if (ret != upd_len) {
-			err_msg("failed to read %d bytes, read %d",
-				upd_len, ret);
-			goto close;
-		}
-		if (memcmp(&buf[0], &buf1[0], upd_len)) {
-			err_msg("data corruption");
-			goto close;
-		}
-
-		close(fd);
-
-		if (ubi_rmvol(libubi, node, req.vol_id)) {
-			failed("ubi_rmvol");
-			return -1;
-		}
-	}
-
-	return 0;
-
-close:
-	close(fd);
-remove:
-	ubi_rmvol(libubi, node, req.vol_id);
-	return -1;
-}
diff --git a/ubi-utils/tests/mkvol_bad.c b/ubi-utils/tests/mkvol_bad.c
deleted file mode 100644
index 023b06b..0000000
--- a/ubi-utils/tests/mkvol_bad.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test UBI volume creation and deletion ioctl()s with bad input and in case of
- * incorrect usage.
- */
-
-#include <string.h>
-#include <errno.h>
-#include <stdio.h>
-#include "libubi.h"
-#define TESTNAME "mkvol_bad"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_mkvol(void);
-static int test_rmvol(void);
-
-int main(int argc, char * const argv[])
-{
-	if (initial_check(argc, argv))
-		return 1;
-
-	node = argv[1];
-
-	libubi = libubi_open();
-	if (libubi == NULL) {
-		failed("libubi_open");
-		return 1;
-	}
-
-	if (ubi_get_dev_info(libubi, node, &dev_info)) {
-		failed("ubi_get_dev_info");
-		goto close;
-	}
-
-	if (test_mkvol())
-		goto close;
-
-	if (test_rmvol())
-		goto close;
-
-	libubi_close(libubi);
-	return 0;
-
-close:
-	libubi_close(libubi);
-	return 1;
-}
-
-/**
- * test_mkvol - test that UBI mkvol ioctl rejects bad input parameters.
- *
- * This function returns %0 if the test passed and %-1 if not.
- */
-static int test_mkvol(void)
-{
-	int ret, i;
-	struct ubi_mkvol_request req;
-	const char *name = TESTNAME ":test_mkvol()";
-
-	req.alignment = 1;
-	req.bytes = dev_info.avail_bytes;
-	req.vol_type = UBI_DYNAMIC_VOLUME;
-	req.name = name;
-
-	/* Bad volume ID */
-	req.vol_id = -2;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EINVAL, "ubi_mkvol", "vol_id = %d", req.vol_id))
-		return -1;
-
-	req.vol_id = dev_info.max_vol_count;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EINVAL, "ubi_mkvol", "vol_id = %d", req.vol_id))
-		return -1;
-
-	/* Bad alignment */
-	req.vol_id = 0;
-	req.alignment = 0;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EINVAL, "ubi_mkvol", "alignment = %d",
-			 req.alignment))
-		return -1;
-
-	req.alignment = -1;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EINVAL, "ubi_mkvol", "alignment = %d",
-			 req.alignment))
-		return -1;
-
-	req.alignment = dev_info.eb_size + 1;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EINVAL, "ubi_mkvol", "alignment = %d",
-			 req.alignment))
-		return -1;
-
-	if (dev_info.min_io_size > 1) {
-		req.alignment = dev_info.min_io_size + 1;
-		ret = ubi_mkvol(libubi, node, &req);
-		if (check_failed(ret, EINVAL, "ubi_mkvol", "alignment = %d",
-				 req.alignment))
-			return -1;
-	}
-
-	/* Bad bytes */
-	req.alignment = 1;
-	req.bytes = -1;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EINVAL, "ubi_mkvol", "bytes = %lld", req.bytes))
-		return -1;
-
-	req.bytes = 0;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EINVAL, "ubi_mkvol", "bytes = %lld", req.bytes))
-		return -1;
-
-	req.bytes = dev_info.avail_bytes + 1;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, ENOSPC, "ubi_mkvol", "bytes = %lld", req.bytes))
-		return -1;
-
-	req.alignment = dev_info.eb_size - dev_info.min_io_size;
-	req.bytes = (dev_info.eb_size - dev_info.eb_size % req.alignment) *
-		    dev_info.avail_ebs + 1;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, ENOSPC, "ubi_mkvol", "bytes = %lld", req.bytes))
-		return -1;
-
-	/* Bad vol_type */
-	req.alignment = 1;
-	req.bytes = dev_info.eb_size;
-	req.vol_type = UBI_DYNAMIC_VOLUME + UBI_STATIC_VOLUME;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EINVAL, "ubi_mkvol", "vol_type = %d",
-			 req.vol_type))
-		return -1;
-
-	req.vol_type = UBI_DYNAMIC_VOLUME;
-
-	/* Too long name */
-	{
-		char name[UBI_VOL_NAME_MAX + 5];
-
-		memset(&name[0], 'x', UBI_VOL_NAME_MAX + 1);
-		name[UBI_VOL_NAME_MAX + 1] = '\0';
-
-		req.name = &name[0];
-		ret = ubi_mkvol(libubi, node, &req);
-		if (check_failed(ret, EINVAL, "ubi_mkvol", "name_len = %d",
-				 UBI_VOL_NAME_MAX + 1))
-		return -1;
-	}
-
-	/* Try to create 2 volumes with the same ID and name */
-	req.name = name;
-	req.vol_id = 0;
-	if (ubi_mkvol(libubi, node, &req)) {
-		failed("ubi_mkvol");
-		return -1;
-	}
-
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EEXIST, "ubi_mkvol",
-			 "volume with ID 0 created twice"))
-		return -1;
-
-	req.vol_id = 1;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EEXIST, "ubi_mkvol",
-			 "volume with name \"%s\" created twice", name))
-		return -1;
-
-	if (ubi_rmvol(libubi, node, 0)) {
-		failed("ubi_rmvol");
-		return -1;
-	}
-
-	/* Try to use too much space */
-	req.vol_id = 0;
-	req.bytes = dev_info.avail_bytes;
-	if (ubi_mkvol(libubi, node, &req)) {
-		failed("ubi_mkvol");
-		return -1;
-	}
-
-	req.bytes = 1;
-	req.vol_id = 1;
-	ret = ubi_mkvol(libubi, node, &req);
-	if (check_failed(ret, EEXIST, "ubi_mkvol",
-			 "created volume of maximum size %lld, but still "
-			 "can create more volumes", dev_info.avail_bytes))
-		return -1;
-
-	if (ubi_rmvol(libubi, node, 0)) {
-		failed("ubi_rmvol");
-		return -1;
-	}
-
-	/* Try to create too many volumes */
-	for (i = 0; i < dev_info.max_vol_count; i++) {
-		char nm[strlen(name) + 50];
-
-		req.vol_id = UBI_VOL_NUM_AUTO;
-		req.alignment = 1;
-		req.bytes = 1;
-		req.vol_type = UBI_STATIC_VOLUME;
-
-		sprintf(&nm[0], "%s:%d", name, i);
-		req.name = &nm[0];
-
-		if (ubi_mkvol(libubi, node, &req)) {
-			/*
-			 * Note, because of gluebi we may be unable to create
-			 * dev_info.max_vol_count devices (MTD restrictions).
-			 */
-			if (errno == ENFILE)
-				break;
-			failed("ubi_mkvol");
-			err_msg("vol_id %d", i);
-			goto remove;
-		}
-	}
-
-	for (i = 0; i < dev_info.max_vol_count + 1; i++)
-		ubi_rmvol(libubi, node, i);
-
-	return 0;
-
-remove:
-	for (i = 0; i < dev_info.max_vol_count + 1; i++)
-		ubi_rmvol(libubi, node, i);
-	return -1;
-}
-
-/**
- * test_rmvol - test that UBI rmvol ioctl rejects bad input parameters.
- *
- * This function returns %0 if the test passed and %-1 if not.
- */
-static int test_rmvol(void)
-{
-	int ret;
-	struct ubi_mkvol_request req;
-	const char *name = TESTNAME ":test_rmvol()";
-
-	/* Bad vol_id */
-	ret = ubi_rmvol(libubi, node, -1);
-	if (check_failed(ret, EINVAL, "ubi_rmvol", "vol_id = -1"))
-		return -1;
-
-	ret = ubi_rmvol(libubi, node, dev_info.max_vol_count);
-	if (check_failed(ret, EINVAL, "ubi_rmvol", "vol_id = %d",
-			 dev_info.max_vol_count))
-		return -1;
-
-	/* Try to remove non-existing volume */
-	ret = ubi_rmvol(libubi, node, 0);
-	if (check_failed(ret, ENODEV, "ubi_rmvol",
-			 "removed non-existing volume 0"))
-		return -1;
-
-	/* Try to remove volume twice */
-	req.vol_id = UBI_VOL_NUM_AUTO;
-	req.alignment = 1;
-	req.bytes = dev_info.avail_bytes;
-	req.vol_type = UBI_DYNAMIC_VOLUME;
-	req.name = name;
-	if (ubi_mkvol(libubi, node, &req)) {
-		failed("ubi_mkvol");
-		return -1;
-	}
-
-	if (ubi_rmvol(libubi, node, req.vol_id)) {
-		failed("ubi_rmvol");
-		return -1;
-	}
-
-	ret = ubi_rmvol(libubi, node, req.vol_id);
-	if (check_failed(ret, ENODEV, "ubi_rmvol", "volume %d removed twice",
-			 req.vol_id))
-		return -1;
-
-	return 0;
-}
diff --git a/ubi-utils/tests/mkvol_basic.c b/ubi-utils/tests/mkvol_basic.c
deleted file mode 100644
index e2120e9..0000000
--- a/ubi-utils/tests/mkvol_basic.c
+++ /dev/null
@@ -1,253 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Test test checks basic volume creation and deletion capabilities.
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <string.h>
-#include "libubi.h"
-#define TESTNAME "mkvol_basic"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int mkvol_basic(void);
-static int mkvol_alignment(void);
-static int mkvol_multiple(void);
-
-int main(int argc, char * const argv[])
-{
-	if (initial_check(argc, argv))
-		return 1;
-
-	node = argv[1];
-
-	libubi = libubi_open();
-	if (libubi == NULL) {
-		failed("libubi_open");
-		return 1;
-	}
-
-	if (ubi_get_dev_info(libubi, node, &dev_info)) {
-		failed("ubi_get_dev_info");
-		goto close;
-	}
-
-	if (mkvol_basic())
-		goto close;
-
-	if (mkvol_alignment())
-		goto close;
-
-	if (mkvol_multiple())
-		goto close;
-
-	libubi_close(libubi);
-	return 0;
-
-close:
-	libubi_close(libubi);
-	return 1;
-}
-
-/**
- * mkvol_alignment - create volumes with different alignments.
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int mkvol_alignment(void)
-{
-	struct ubi_mkvol_request req;
-	int i, vol_id, ebsz;
-	const char *name = TESTNAME ":mkvol_alignment()";
-	int alignments[] = ALIGNMENTS(dev_info.eb_size);
-
-	for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
-		req.vol_id = UBI_VOL_NUM_AUTO;
-
-		/* Alignment should actually be multiple of min. I/O size */
-		req.alignment = alignments[i];
-		req.alignment -= req.alignment % dev_info.min_io_size;
-		if (req.alignment == 0)
-			req.alignment = dev_info.min_io_size;
-
-		/* Bear in mind alignment reduces EB size */
-		ebsz = dev_info.eb_size - dev_info.eb_size % req.alignment;
-		req.bytes = dev_info.avail_ebs * ebsz;
-
-		req.vol_type = UBI_DYNAMIC_VOLUME;
-		req.name = name;
-
-		if (ubi_mkvol(libubi, node, &req)) {
-			failed("ubi_mkvol");
-			err_msg("alignment %d", req.alignment);
-			return -1;
-		}
-
-		vol_id = req.vol_id;
-		if (check_volume(vol_id, &req))
-			goto remove;
-
-		if (ubi_rmvol(libubi, node, vol_id)) {
-			failed("ubi_rmvol");
-			return -1;
-		}
-	}
-
-	return 0;
-
-remove:
-	ubi_rmvol(libubi, node, vol_id);
-	return -1;
-}
-
-/**
- * mkvol_basic - simple test that checks basic volume creation capability.
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int mkvol_basic(void)
-{
-	struct ubi_mkvol_request req;
-	struct ubi_vol_info vol_info;
-	int vol_id, ret;
-	const char *name = TESTNAME ":mkvol_basic()";
-
-	/* Create dynamic volume of maximum size */
-	req.vol_id = UBI_VOL_NUM_AUTO;
-	req.alignment = 1;
-	req.bytes = dev_info.avail_bytes;
-	req.vol_type = UBI_DYNAMIC_VOLUME;
-	req.name = name;
-
-	if (ubi_mkvol(libubi, node, &req)) {
-		failed("ubi_mkvol");
-		return -1;
-	}
-
-	vol_id = req.vol_id;
-	if (check_volume(vol_id, &req))
-		goto remove;
-
-	if (ubi_rmvol(libubi, node, vol_id)) {
-		failed("ubi_rmvol");
-		return -1;
-	}
-
-	/* Create static volume of maximum size */
-	req.vol_id = UBI_VOL_NUM_AUTO;
-	req.alignment = 1;
-	req.bytes = dev_info.avail_bytes;
-	req.vol_type = UBI_STATIC_VOLUME;
-	req.name = name;
-
-	if (ubi_mkvol(libubi, node, &req)) {
-		failed("ubi_mkvol");
-		return -1;
-	}
-
-	vol_id = req.vol_id;
-	if (check_volume(vol_id, &req))
-		goto remove;
-
-	if (ubi_rmvol(libubi, node, vol_id)) {
-		failed("ubi_rmvol");
-		return -1;
-	}
-
-	/* Make sure volume does not exist */
-	ret = ubi_get_vol_info1(libubi, dev_info.dev_num, vol_id, &vol_info);
-	if (ret == 0) {
-		err_msg("removed volume %d exists", vol_id);
-		goto remove;
-	}
-
-	return 0;
-
-remove:
-	ubi_rmvol(libubi, node, vol_id);
-	return -1;
-}
-
-/**
- * mkvol_multiple - test multiple volumes creation
- *
- * Thus function returns %0 if the test passed and %-1 if not.
- */
-static int mkvol_multiple(void)
-{
-	struct ubi_mkvol_request req;
-	int i, ret, max = dev_info.max_vol_count;
-	const char *name = TESTNAME ":mkvol_multiple()";
-
-	/* Create maximum number of volumes */
-	for (i = 0; i < max; i++) {
-		char nm[strlen(name) + 50];
-
-		req.vol_id = UBI_VOL_NUM_AUTO;
-		req.alignment = 1;
-		req.bytes = 1;
-		req.vol_type = UBI_STATIC_VOLUME;
-
-		sprintf(&nm[0], "%s:%d", name, i);
-		req.name = &nm[0];
-
-		if (ubi_mkvol(libubi, node, &req)) {
-			if (errno == ENFILE) {
-				max = i;
-				break;
-			}
-			failed("ubi_mkvol");
-			err_msg("vol_id %d", i);
-			goto remove;
-		}
-
-		if (check_volume(req.vol_id, &req)) {
-			err_msg("vol_id %d", i);
-			goto remove;
-		}
-	}
-
-	for (i = 0; i < max; i++) {
-		struct ubi_vol_info vol_info;
-
-		if (ubi_rmvol(libubi, node, i)) {
-			failed("ubi_rmvol");
-			return -1;
-		}
-
-		/* Make sure volume does not exist */
-		ret = ubi_get_vol_info1(libubi, dev_info.dev_num, i, &vol_info);
-		if (ret == 0) {
-			err_msg("removed volume %d exists", i);
-			goto remove;
-		}
-	}
-
-	return 0;
-
-remove:
-	for (i = 0; i < dev_info.max_vol_count + 1; i++)
-		ubi_rmvol(libubi, node, i);
-	return -1;
-}
diff --git a/ubi-utils/tests/mkvol_paral.c b/ubi-utils/tests/mkvol_paral.c
deleted file mode 100644
index faf085c..0000000
--- a/ubi-utils/tests/mkvol_paral.c
+++ /dev/null
@@ -1,112 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * This test creates and deletes volumes in parallel.
- */
-
-#include <stdio.h>
-#include <errno.h>
-#include <string.h>
-#include <pthread.h>
-#include "libubi.h"
-#define TESTNAME "mkvol_paral"
-#include "common.h"
-
-#define THREADS_NUM 4
-#define ITERATIONS  500
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-static int iterations = ITERATIONS;
-
-static void * the_thread(void *ptr);
-
-int main(int argc, char * const argv[])
-{
-	int i, ret;
-	pthread_t threads[THREADS_NUM];
-
-	if (initial_check(argc, argv))
-		return 1;
-
-	node = argv[1];
-
-	libubi = libubi_open();
-	if (libubi == NULL) {
-		failed("libubi_open");
-		return 1;
-	}
-
-	if (ubi_get_dev_info(libubi, node, &dev_info)) {
-		failed("ubi_get_dev_info");
-		goto close;
-	}
-
-	for (i = 0; i < THREADS_NUM; i++) {
-		ret = pthread_create(&threads[i], NULL, &the_thread, (void*)i);
-		if (ret) {
-			failed("pthread_create");
-			goto close;
-		}
-	}
-
-	for (i = 0; i < THREADS_NUM; i++)
-		pthread_join(threads[i], NULL);
-
-	libubi_close(libubi);
-	return 0;
-
-close:
-	libubi_close(libubi);
-	return 1;
-}
-
-/**
- * the_thread - the testing thread.
- *
- * @ptr  thread number
- */
-static void * the_thread(void *ptr)
-{
-	int n = (int)ptr, iter = iterations;
-	struct ubi_mkvol_request req;
-	const char *name =  TESTNAME ":the_thread()";
-	char nm[strlen(name) + 50];
-
-	req.alignment = 1;
-	req.bytes = dev_info.avail_bytes/ITERATIONS;
-	req.vol_type = UBI_DYNAMIC_VOLUME;
-	sprintf(&nm[0], "%s:%d", name, n);
-	req.name = &nm[0];
-
-	while (iter--) {
-		req.vol_id = UBI_VOL_NUM_AUTO;
-		if (ubi_mkvol(libubi, node, &req)) {
-			failed("ubi_mkvol");
-			return NULL;
-		}
-		if (ubi_rmvol(libubi, node, req.vol_id)) {
-			failed("ubi_rmvol");
-			return NULL;
-		}
-	}
-
-	return NULL;
-}
diff --git a/ubi-utils/tests/rsvol.c b/ubi-utils/tests/rsvol.c
deleted file mode 100644
index 7a9e5ea..0000000
--- a/ubi-utils/tests/rsvol.c
+++ /dev/null
@@ -1,310 +0,0 @@
-/*
- * Copyright (c) International Business Machines Corp., 2006
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
- * the GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Author: Artem B. Bityutskiy
- *
- * Tes UBI volume re-size.
- */
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <errno.h>
-#include <string.h>
-#include <unistd.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include "libubi.h"
-#define TESTNAME "rsvol"
-#include "common.h"
-
-static libubi_t libubi;
-static struct ubi_dev_info dev_info;
-const char *node;
-
-static int test_basic(int type);
-static int test_rsvol(int type);
-
-int main(int argc, char * const argv[])
-{
-	if (initial_check(argc, argv))
-		return 1;
-
-	node = argv[1];
-
-	libubi = libubi_open();
-	if (libubi == NULL) {
-		failed("libubi_open");
-		return 1;
-	}
-
-	if (ubi_get_dev_info(libubi, node, &dev_info)) {
-		failed("ubi_get_dev_info");
-		goto close;
-	}
-
-	if (test_basic(UBI_DYNAMIC_VOLUME))
-		goto close;
-	if (test_basic(UBI_STATIC_VOLUME))
-		goto close;
-	if (test_rsvol(UBI_DYNAMIC_VOLUME))
-		goto close;
-	if (test_rsvol(UBI_STATIC_VOLUME))
-		goto close;
-
-	libubi_close(libubi);
-	return 0;
-
-close:
-	libubi_close(libubi);
-	return 1;
-}
-
-/**
- * test_basic - check volume re-size capability.
- *
- * @type  volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_basic(int type)
-{
-	struct ubi_mkvol_request req;
-	const char *name = TESTNAME ":test_basic()";
-
-	req.vol_id = UBI_VOL_NUM_AUTO;
-	req.alignment = 1;
-	req.bytes = MIN_AVAIL_EBS * dev_info.eb_size;
-	req.vol_type = type;
-	req.name = name;
-
-	if (ubi_mkvol(libubi, node, &req)) {
-		failed("ubi_mkvol");
-		return -1;
-	}
-
-	req.bytes = dev_info.eb_size;
-	if (ubi_rsvol(libubi, node, req.vol_id, req.bytes)) {
-		failed("ubi_rsvol");
-		goto remove;
-	}
-
-	if (check_volume(req.vol_id, &req))
-		goto remove;
-
-	req.bytes = (MIN_AVAIL_EBS + 1) * dev_info.eb_size;
-	if (ubi_rsvol(libubi, node, req.vol_id, req.bytes)) {
-		failed("ubi_rsvol");
-		goto remove;
-	}
-
-	if (check_volume(req.vol_id, &req))
-		goto remove;
-
-	req.bytes -= 1;
-	if (ubi_rsvol(libubi, node, req.vol_id, req.bytes)) {
-		failed("ubi_rsvol");
-		goto remove;
-	}
-
-	if (check_volume(req.vol_id, &req))
-		goto remove;
-
-	if (ubi_rmvol(libubi, node, req.vol_id)) {
-		failed("ubi_rmvol");
-		return -1;
-	}
-
-	return 0;
-
-remove:
-	ubi_rmvol(libubi, node, req.vol_id);
-	return -1;
-}
-
-static int test_rsvol1(struct ubi_vol_info *vol_info);
-
-/**
- * test_rsvol - test UBI volume re-size.
- *
- * @type  volume type (%UBI_DYNAMIC_VOLUME or %UBI_STATIC_VOLUME)
- *
- * Thus function returns %0 in case of success and %-1 in case of failure.
- */
-static int test_rsvol(int type)
-{
-	const char *name = TESTNAME "test_rsvol:()";
-	int alignments[] = ALIGNMENTS(dev_info.eb_size);
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-	struct ubi_mkvol_request req;
-	int i;
-
-	for (i = 0; i < sizeof(alignments)/sizeof(int); i++) {
-		int eb_size;
-		struct ubi_vol_info vol_info;
-
-		req.vol_id = UBI_VOL_NUM_AUTO;
-		req.vol_type = type;
-		req.name = name;
-
-		req.alignment = alignments[i];
-		req.alignment -= req.alignment % dev_info.min_io_size;
-		if (req.alignment == 0)
-			req.alignment = dev_info.min_io_size;
-
-		eb_size = dev_info.eb_size - dev_info.eb_size % req.alignment;
-		req.bytes =  MIN_AVAIL_EBS * eb_size;
-
-		if (ubi_mkvol(libubi, node, &req)) {
-			failed("ubi_mkvol");
-			return -1;
-		}
-
-		sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
-			req.vol_id);
-
-		if (ubi_get_vol_info(libubi, vol_node, &vol_info)) {
-			failed("ubi_get_vol_info");
-			goto remove;
-		}
-
-		if (test_rsvol1(&vol_info)) {
-			err_msg("alignment = %d", req.alignment);
-			goto remove;
-		}
-
-		if (ubi_rmvol(libubi, node, req.vol_id)) {
-			failed("ubi_rmvol");
-			return -1;
-		}
-	}
-
-	return 0;
-
-remove:
-	ubi_rmvol(libubi, node, req.vol_id);
-	return -1;
-}
-
-/*
- * Helper function for test_rsvol().
- */
-static int test_rsvol1(struct ubi_vol_info *vol_info)
-{
-	long long bytes;
-	struct ubi_vol_info vol_info1;
-	char vol_node[strlen(UBI_VOLUME_PATTERN) + 100];
-	unsigned char buf[vol_info->rsvd_bytes];
-	int fd, i, ret;
-
-	/* Make the volume smaller and check basic volume I/O */
-	bytes = vol_info->rsvd_bytes - vol_info->eb_size;
-	if (ubi_rsvol(libubi, node, vol_info->vol_id, bytes - 1)) {
-		failed("ubi_rsvol");
-		return -1;
-	}
-
-	if (ubi_get_vol_info1(libubi, vol_info->dev_num, vol_info->vol_id,
-			     &vol_info1)) {
-		failed("ubi_get_vol_info");
-		return -1;
-	}
-
-	if (vol_info1.rsvd_bytes != bytes) {
-		err_msg("rsvd_bytes %lld, must be %lld",
-			vol_info1.rsvd_bytes, bytes);
-		return -1;
-	}
-
-	if (vol_info1.rsvd_ebs != vol_info->rsvd_ebs - 1) {
-		err_msg("rsvd_ebs %d, must be %d",
-			vol_info1.rsvd_ebs, vol_info->rsvd_ebs - 1);
-		return -1;
-	}
-
-	/* Write data to the volume */
-	sprintf(&vol_node[0], UBI_VOLUME_PATTERN, dev_info.dev_num,
-			vol_info->vol_id);
-
-	fd = open(vol_node, O_RDWR);
-	if (fd == -1) {
-		failed("open");
-		err_msg("cannot open \"%s\"\n", vol_node);
-		return -1;
-	}
-
-	bytes = vol_info->rsvd_bytes - vol_info->eb_size - 1;
-	if (ubi_update_start(libubi, fd, bytes)) {
-		failed("ubi_update_start");
-		goto close;
-	}
-
-	for (i = 0; i < bytes; i++)
-		buf[i] = (unsigned char)i;
-
-	ret = write(fd, &buf[0], bytes);
-	if (ret != bytes) {
-		failed("write");
-		goto close;
-	}
-
-	close(fd);
-
-	if (ubi_rsvol(libubi, node, vol_info->vol_id, bytes)) {
-		failed("ubi_rsvol");
-		return -1;
-	}
-
-	if (ubi_rsvol(libubi, node, vol_info->vol_id,
-		      vol_info->eb_size * dev_info.avail_ebs)) {
-		failed("ubi_rsvol");
-		return -1;
-	}
-
-	fd = open(vol_node, O_RDWR);
-	if (fd == -1) {
-		failed("open");
-		err_msg("cannot open \"%s\"\n", vol_node);
-		return -1;
-	}
-
-	/* Read data back */
-	if (lseek(fd, 0, SEEK_SET) != 0) {
-		failed("seek");
-		goto close;
-	}
-	memset(&buf[0], 0, bytes);
-	ret = read(fd, &buf[0], bytes);
-	if (ret != bytes) {
-		failed("read");
-		goto close;
-	}
-
-	for (i = 0; i < bytes; i++) {
-		if (buf[i] != (unsigned char)i) {
-			err_msg("bad data");
-			goto close;
-		}
-	}
-
-	close(fd);
-	return 0;
-
-close:
-	close(fd);
-	return -1;
-}
diff --git a/ubi-utils/tests/runtests.pl b/ubi-utils/tests/runtests.pl
deleted file mode 100755
index 8005716..0000000
--- a/ubi-utils/tests/runtests.pl
+++ /dev/null
@@ -1,30 +0,0 @@
-#!/usr/bin/perl -w
-
-sub usage;
-
-my @tests = ("mkvol_basic", "mkvol_bad", "mkvol_paral", "rsvol",
-	     "io_basic", "io_read", "io_update", "io_paral");
-
-if (not defined @ARGV) {
-	usage();
-	exit;
-}
-
-foreach (@ARGV) {
-	-c or die "Error: $_ is not character device\n";
-}
-
-my $dev;
-foreach $dev (@ARGV) {
-	foreach (@tests) {
-		print "Running: $_ $dev";
-		system "./$_ $dev" and die;
-		print "\tSUCCESS\n";
-	}
-}
-
-sub usage
-{
-	print "Usage:\n";
-	print "$0 <UBI device 1> <UBI device 2> ...\n";
-}
diff --git a/ubi-utils/tests/runtests.sh b/ubi-utils/tests/runtests.sh
deleted file mode 100755
index f993bc0..0000000
--- a/ubi-utils/tests/runtests.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-
-ubidev="$1"
-ubiloadcmd="$2"
-tests="mkvol_basic mkvol_bad mkvol_paral rsvol io_basic io_read io_update io_paral"
-
-if test -z "$ubidev" || test -z "$ubiloadcmd";
-then
-	echo "Usage:"
-	echo "$0 <UBI device> <ubi module load command>"
-	exit 1
-fi
-
-ubiname=`echo $ubidev | cut -d/ -f3`
-
-major=`cat /sys/class/ubi/$ubiname/dev | cut -d: -f1`
-
-for minor in `seq 0 4`; do
-	if test ! -e ${ubidev}_${minor} ;
-	then
-		mknod ${ubidev}_${minor} c $major $(($minor + 1))
-	fi
-done
-
-if ! test -c "$ubidev";
-then
-	echo "Error: $ubidev is not character device"
-	exit 1
-fi
-
-for t in `echo $tests`;
-do
-	echo "Running $t $ubidev"
-	"./$t" "$ubidev" || exit 1
-done
-
-./integ "$ubiloadcmd" || exit 1
-
-echo SUCCESS
-
-exit 0