| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of holding the state internally, move it outside and let the
user pass it in. This allows processing multiple directories and going
back and forth between them, while also simplifying the dir reader
internals.
The sqfs_dir_reader_get_inode function can also be made more generic
to accept a reference instead of being fully state dependent.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Modify gensquashfs to pack data using an istream wrapper, similar
to tar2sqfs. To implement the no-tail-pack option, we need the file
size, so we simply open a raw handle first, and query it (using
libsquashfs API) and then create the stream wrapper. For the output
side, we create a block-processor ostream wrapper and splice it.
Since gensquashfs is the only, remaining user of the pack-a-file
functon, we can then remove it from libcommon.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Rename the open function to sqfs_file_open, use an argument for the
return pointer and pass back and error number on failure. Also add
an inermediate function to open an sqfs_file_t using a handle, similar
to the stream API. The get_file_size function is moved to the native
wrappers and some of the implementation is cleaned up a little.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
To the sqfs_data_reader_t is added, an sqfs_istream_t implementation
that internally reads through the data reader. The uses of the
data_reader_dump function are removed and the function is subsequently
removed from libcommon.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
There are several ad-hoc int/uint parsers scattered around the code,
add a single helper function for that task and replace the multiple
instances. A simple white-box test case is added for the utility
function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
It is mainly a very thin wrapper on top of the block processor so far.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
On Unix like OSes, this saves/restores errno, on Windows both errno
and GetLastError state are saved/restored.
This should make it simpler to preserve that across function calls.
Additionally, while tracking down uses of GetLastError, some places
where the error code was printed out directly where replaced with
instances of w32_perror.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Report an error number from the implementations, change the users to
forward that error number (which also means libtar write header/link
now returns an error code) and all subsequent binaries to use
sqfs_perror() instead of relying on the function to print an error
internally.
Also, make sure to preserve errno/GetLastError() in the implementations
and print out a stringified error in sqfs_perror() if the error code
indicates an I/O error.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
istream_t becomes sqfs_istream_t and ostream_t becomes sqfs_ostream_t
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of a separate append-sparse function, simply accept NULL
as an input for append. For both Unix and Win32, a fallback needs
to be implemented. For XFRM, we can just memset the input buffer
to zero, same for the libsquashfs data writer.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Using depth-first search, we collect some crude statistics about
directory tree types (e.g. regular files, directories, device special
files and so on) and print them out after serializing the tree.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of adding special sentinel modes, simply treat hard links as
special case of symlinks, setting a flag to indicate that it is a
hard link and another flag to indicate that it has been resolved.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The single boolean created_implicitly can be replaced with a general
purpose flag field. The "children" pointer can then be hoisted directly
into the data union of tree_node_t.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
On Windows, long is a 32 bit integer, so we cannot check if the long
value is greater than UINT32_MAX. Instead, check if strtol sets errno.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The idea of the block align feature was to allow micro-managing that
some files are forcefully aligned to 1k/4k ("device block") boundaries,
hoping to improve access time at the cost of data density. The feature
was not exposed in the tools for a long time and eventuall added to the
sort file. Measurement and experimentation showed, that it in fact
worsened the read performance on a test system with an old micro SD
card as the bottle neck.
The feature is removed, and if needed, can be brought back simply by
wrapping/sub-classing the default block writer, if need be..
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Implement grab/drop functions to increase/decrease reference count
and destroy the object if the count drops to 0.
Make sure that all objects that maintain internal references actually
grab that reference, duplicate it in the copy function, drop it in
the destroy handler.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
mksquashfs generates extended inodes if a directory contains 256
entries. libsquashfs so far only generated extended inodes if there
is no other way to encode it. Mimic the behaviour of mksquashfs by
adding a threshold.
For this to work, the "sqfs_inode_set_xattr_index" function has to
be changed to not immediately try to demote inodes to basic types.
The fstree serialization is modified to do that itself if the index
is 0xFFFFFFFF and the target is not a directory inode.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Not all CPUs may be available for the current process. Some CPUs
may be offline, others may not be included in the process affinity
mask. In such cases too many threads will be created, which will
then compete unnecessarily for CPU time.
Use sched_getaffinity() to determine the correct number of threads
to create.
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of printing error messages to stderr, simply return an error
number instead, that the caller then prints out using sqfs_perror.
The underlying rbtree already uses sqfs error numbers, so little
change is needed here.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Test against various invariants:
- Every non-root node must have a name
- The root node muts not have a name
- The name must not be ".." or "."
- The name must not contain '/'
- The loop that chases parent pointers must terminate, i.e. we must
never reach the starting state again (link loop).
Furthermore, make sure the sum of all path components plus separators
does not overflow.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
After trying removing many instances of `struct stat`, there is only
one user of inode_stat left, so move the function there.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Move all the libutil stuff from the toplevel include/ to a util/
sub directory and fix up the includes that make use of them.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
When accessing the 16 bit header, don't cast the buffer pointer to an
uint16_t pointer, the result might not be aligned propperly. Instead
memcpy to and from an uint16_t.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The sqsf_writer is moved to a separate header, as well as the compressor
related stuff. The statistics function is moved into the writer code, as
this is the only place that actually uses it. The writer code itself is
split up into a hand full of file in their own subdirectory.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Modify the man pages and help texts to mention compression support, make
the help option display a list of supported compressors.
Also clarify the squashfs compressor list in the help text to state that
the list shows block compressors supported for SquashFS compression.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit rewrites the libtar write paths to use libfstream insead of
a FILE pointer. Also, the libcommon file extraction function is remodeled
to use libfstream.
In accordance, rdsquashfs, sqfs2tar and sqfsdiff have some minor
adjustments made to work with the ported libtar and libcommon.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The function sqfs_tree_node_get_path is used in several places within
rdsquashfs to produce a path for a tree node, either when describing
the file system, or when unpacking it. Unpacking can be done on
sub-trees as well as the entire tree, in which case the root of the
sub-tree has its parent pointer removed, so the full path terminates
at the new root.
This works with directories, since they receive special case handling
anyway, but fails if the sub-tree to unpack is only a single file
because the sqfs_tree_node_get_path function assumes that we are at the
tree root and returns "/" as a path, which gets normalized to "".
This commit adds a workaround to the function to simply use the nodes
name (if available) in that case instead.
The describe case in rdsquashfs is unaffacted, since it always starts
at the root. Likewise, the sqfs2tar case should also be unaffacted,
since it already employs special case handling for the [sub] tree root
node.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of the convoluted logic, simply use a small number of LUTs
that point to the available compressor flags for each compressor,
the avaialble options and their ranges.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Every compressor (except LC4) has a compression level parameter. This
commit pulls the compression level field out into the generic
configuration structure and applies some code clean ups as a result
from this.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
