documentation: move benchmark description to separate file

Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>

1 files changed, 0 insertions, 131 deletions

diff --git a/doc/parallelism.txt b/doc/parallelism.txt
index 315a631..ca18add 100644
--- a/doc/parallelism.txt
+++ b/doc/parallelism.txt
@@ -107,134 +107,3 @@
  add a lot for I/O bound compressors like zstd.
 
  If you have a better idea how to do this, please let me know.
-
-
- 2) Benchmarks
- *************
-
- 2.1) How was the Benchmark Performed?
-
- An optimized build of squashfs-tools-ng was compiled and installed to a tmpfs:
-
-  $ mkdir /dev/shm/temp
-  $ ln -s /dev/shm/temp out
-  $ ./autogen.sh
-  $ ./configure CFLAGS="-O3 -Ofast -march=native -mtune=native" \
-                LDFLAGS="-O3 -Ofast" --prefix=$(pwd)/out
-  $ make -j install
-  $ cd out
-
- A SquashFS image to be tested was unpacked in this directory:
-
-  $ ./bin/sqfs2tar <IMAGE> > test.tar
-
- And then repacked as follows:
-
-  $ time ./bin/tar2sqfs -j <NUM_CPU> -c <COMPRESSOR> -f test.sqfs < test.tar
-
-
- Out of 4 runs, the worst wall-clock time ("real") was used for comparison.
-
-
- For the serial reference version, configure was re-run with the option
- --without-pthread, the tools re-compiled and re-installed.
-
-
- 2.2) What Image was Tested?
-
- A Debian image extracted from the Debian 10.2 LiveDVD for AMD64 with XFCE
- was used.
-
- The input size and resulting output sizes turned out to be as follows:
-
-  - As uncompressed tarball:           ~6.5GiB (7,008,118,272)
-  - As LZ4 compressed SquashFS image:  ~3.1GiB (3,381,751,808)
-  - As LZO compressed SquashFS image:  ~2.5GiB (2,732,015,616)
-  - As zstd compressed SquashFS image: ~2.1GiB (2,295,017,472)
-  - As gzip compressed SquashFS image: ~2.3GiB (2,471,276,544)
-  - As lzma compressed SquashFS image: ~2.0GiB (2,102,169,600)
-  - As XZ compressed SquashFS image:   ~2.0GiB (2,098,466,816)
-
-
- The Debian image is expected to contain realistic input data for a Linux
- file system and also provide enough data for an interesting benchmark.
-
-
- 2.3) What Test System was used?
-
-  AMD Ryzen 7 3700X
-  32GiB DDR4 RAM
-  Fedora 31
-
-
- 2.4) Results
-
- The raw timing results are as follows:
-
- Jobs    XZ          lzma        gzip        LZO         LZ4      zstd
- serial  17m39.613s  16m10.710s   9m56.606s  13m22.337s  12.159s  9m33.600s
-      1  17m38.050s  15m49.753s   9m46.948s  13m06.705s  11.908s  9m23.445s
-      2   9m26.712s   8m24.706s   5m08.152s   6m53.872s   7.395s  5m 1.734s
-      3   6m29.733s   5m47.422s   3m33.235s   4m44.407s   6.069s  3m30.708s
-      4   5m02.993s   4m30.361s   2m43.447s   3m39.825s   5.864s  2m44.418s
-      5   4m07.959s   3m40.860s   2m13.454s   2m59.395s   5.749s  2m16.745s
-      6   3m30.514s   3m07.816s   1m53.641s   2m32.461s   5.926s  1m57.607s
-      7   3m04.009s   2m43.765s   1m39.742s   2m12.536s   6.281s  1m43.734s
-      8   2m45.050s   2m26.996s   1m28.776s   1m58.253s   6.395s  1m34.500s
-      9   2m34.993s   2m18.868s   1m21.668s   1m50.461s   6.890s  1m29.820s
-     10   2m27.399s   2m11.214s   1m15.461s   1m44.060s   7.225s  1m26.176s
-     11   2m20.068s   2m04.592s   1m10.286s   1m37.749s   7.557s  1m22.566s
-     12   2m13.131s   1m58.710s   1m05.957s   1m32.596s   8.127s  1m18.883s
-     13   2m07.472s   1m53.481s   1m02.041s   1m27.982s   8.704s  1m16.218s
-     14   2m02.365s   1m48.773s   1m00.337s   1m24.444s   9.494s  1m14.175s
-     15   1m58.298s   1m45.079s     58.348s   1m21.445s  10.192s  1m12.134s
-     16   1m55.940s   1m42.176s     56.615s   1m19.030s  10.964s  1m11.049s
-
- The file "benchmark.ods" contains those values, values derived from this and
- charts depicting the results.
-
-
- 2.5) Discussion
-
- Most obviously, the results indicate that LZ4, unlike the other compressors,
- is clearly I/O bound and not CPU bound and doesn't benefit from parallelization
- beyond 2-4 worker threads and even that benefit is marginal with efficiency
- plummetting immediately.
-
-
- The other compressors are clearly CPU bound. Speedup increases linearly until
- about 8 cores, but with a slope < 1, as evident by efficiency linearly
- decreasing and reaching 80% for 8 cores.
-
- A reason for this sub-linear scaling may be the choke point introduced by the
- creation of fragment blocks, that *requires* a synchronization. To test this
- theory, a second benchmark should be performed with fragment block generation
- completely disabled. This requires a new flag to be added to tar2sqfs (and
- also gensquashfs).
-
-
- Using more than 8 jobs causes a much slower increase in speedup and efficency
- declines even faster. This is probably due to the fact that the test system
- only has 8 physical cores and beyond that, SMT has to be used.
-
-
- It should also be noted that the thread pool compressor with only a single
- thread turns out to be *slightly* faster than the serial reference
- implementation. A possible explanation for this might be that the fragment
- blocks are actually assembled in the main thread, in parallel to the worker
- that can still continue with other data blocks. Because of this decoupling
- there is in fact some degree of parallelism, even if only one worker thread
- is used.
-
-
- As a side effect, this benchmark also produces some insights into the
- compression ratio and throughput of the supported compressors. Indicating that
- for the Debian live image, XZ clearly provides the highest data density, while
- LZ4 is clearly the fastest compressor available.
-
- The throughput of the zstd compressor is comparable to gzip, while the
- resulting compression ratio is closer to LZMA.
-
- Repeating the benchmark without tail-end-packing and with fragments completely
- disabled would also show the effectiveness of tail-end-packing and fragment
- packing as a side effect.