3 files changed, 229 insertions, 2 deletions
diff --git a/tests/ubifs_tools-tests/Makemodule.am b/tests/ubifs_tools-tests/Makemodule.am
index d54514d..932a2bc 100644
--- a/tests/ubifs_tools-tests/Makemodule.am
+++ b/tests/ubifs_tools-tests/Makemodule.am
@@ -2,4 +2,5 @@ test_SCRIPTS += \
 	tests/ubifs_tools-tests/lib/common.sh \
 	tests/ubifs_tools-tests/fsck_tests/authentication_refuse.sh \
 	tests/ubifs_tools-tests/fsck_tests/cycle_mount_fsck_check.sh \
-	tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh
+	tests/ubifs_tools-tests/fsck_tests/powercut_fsck_mount.sh \
+	tests/ubifs_tools-tests/fsck_tests/cycle_corrupted_fsck_fault_inject.sh
diff --git a/tests/ubifs_tools-tests/fsck_tests/cycle_corrupted_fsck_fault_inject.sh.in b/tests/ubifs_tools-tests/fsck_tests/cycle_corrupted_fsck_fault_inject.sh.in
new file mode 100755
index 0000000..2073fec
--- /dev/null
+++ b/tests/ubifs_tools-tests/fsck_tests/cycle_corrupted_fsck_fault_inject.sh.in
@@ -0,0 +1,225 @@
+#!/bin/sh
+# Copyright (c), 2024, Huawei Technologies Co, Ltd.
+# Author: Zhihao Cheng <chengzhihao1@huawei.com>
+#
+# Test Description:
+# For many kinds of flash, do following things
+#  1. mount UBIFS
+#  2. fsstress && unmount
+#  3. inject corruption into UBIFS image randomly
+#  3. fsck UBIFS && inject kinds of errors(memory, io)
+#  4. check UBIFS mounting result
+# Running time: 15min
+
+TESTBINDIR=@TESTBINDIR@
+source $TESTBINDIR/common.sh
+
+function run_test()
+{
+	local simulator="$1";
+	local size="$2";
+	local peb_size="$3";
+	local page_size="$4";
+	local encryption=$5;
+
+	echo "======================================================================"
+	printf "%s" "$simulator: ${size}MiB PEB size ${peb_size}KiB"
+	if [ "$simulator" = "nandsim" ]; then
+		printf " %s" "page size ${page_size}Bytes"
+	fi
+	printf " $encryption\n"
+
+	if [ "$simulator" = "nandsim" ]; then
+		$TESTBINDIR/load_nandsim.sh "$size" "$peb_size" "$page_size" || echo "cannot load nandsim";
+		mtdnum="$(find_mtd_device "$nandsim_patt")"
+	elif [ "$simulator" = "mtdram" ]; then
+		load_mtdram "$size" "$peb_size" || echo "cannot load mtdram"
+		mtdnum="$(find_mtd_device "$mtdram_patt")"
+	else
+		fatal "$simulator is not supported"
+	fi
+
+	flash_eraseall /dev/mtd$mtdnum
+	modprobe ubi mtd="$mtdnum,$page_size" || fatal "modprobe ubi fail"
+	ubimkvol -N vol_test -m -n 0 /dev/ubi$UBI_NUM || fatal "mkvol fail"
+	modprobe ubifs || fatal "modprobe ubifs fail"
+	mount_ubifs $DEV $MNT || fatal "mount ubifs fail"
+	if [[ "$encryption" == "encrypted" ]]; then
+		encryption_gen_key
+		encryption_set_key $MNT
+	fi
+
+	fsstress -d $MNT -l0 -p4 -n10000 &
+
+	sleep $((RANDOM % 20))
+
+	ps -e | grep -w fsstress > /dev/null 2>&1
+	while [ $? -eq 0 ]
+	do
+		killall -9 fsstress > /dev/null 2>&1
+		sleep 1
+		ps -e | grep -w fsstress > /dev/null 2>&1
+	done
+
+	while true
+	do
+		res=`mount | grep "$MNT"`
+		if [[ "$res" == "" ]]
+		then
+			break;
+		fi
+		umount $MNT
+		sleep 0.1
+	done
+
+	# inject corruption
+	times=$((RANDOM % 10))
+	let times=$times+10
+	i=0
+	tot_peb=`cat /sys/class/ubi/ubi$UBI_NUM/total_eraseblocks`;
+
+	modprobe -r ubifs
+	modprobe -r ubi # Stop wear-leveling & erasing worker
+	while [[ $i -lt $times ]]
+	do
+		let i=$i+1;
+		peb=$((RANDOM % $tot_peb));
+		pg=`expr $peb_size \* 1024`;
+		peb_off=`expr $pg \* $peb`
+		pages=`expr $pg / $page_size`;
+		pg=`expr $pages - 2`;
+		pg=$((RANDOM % $pg));
+		pg_off=`expr $pg + 2`;
+		pg_start=`expr $pages \* $peb`;
+		pg=`expr $pg_start + $pg_off`;
+		vid_pg=`expr $pg_start + 1`;
+		dd if=/dev/mtd$mtdnum of=$TMP_FILE bs=$page_size skip=$vid_pg count=1 2>/dev/null;
+		content=`cat $TMP_FILE | grep UBI!`; # vid header magic
+		if [[ "$content" == "" ]]; then
+			# Skip free PEB, otherwise LEB data could be overwritten in UBIFS
+			continue;
+		fi
+		if [[ $((RANDOM % 2)) == 0 ]]; then
+			# Corrupts 1 page
+			dd if=/dev/urandom of=/dev/mtd$mtdnum bs=$page_size seek=$pg count=1;
+		else
+			# Erase 1 LEB, TNC points to an unmapped area
+			flash_erase /dev/mtd$mtdnum $peb_off 1
+		fi
+	done
+	rm -f $TMP_FILE 2>/dev/null
+	sync
+
+	skip=0
+	modprobe ubi mtd="$mtdnum,$page_size"
+	ret=$?
+	if [[ $ret != 0 ]]
+	then
+		skip=1
+		echo "UBI layout volume is corrupted, skip"
+	fi
+
+	if [[ $skip == 0 ]]; then
+		modprobe ubifs || fatal "modprobe ubifs2 fail"
+		dmesg -c > /dev/null
+
+		round=0
+		while [[ $round -lt 50 ]];
+		do
+			let round=$round+1
+			inject_mem=0
+
+			fsck.ubifs -yb $DEV 2>&1 > $LOG_FILE &
+			pid=$!
+			if [[ $((RANDOM % 2)) == 0 ]]; then
+				inject_mem_err $pid
+				inject_mem=1
+			fi
+			inject_io_err
+			wait $pid
+			cat $LOG_FILE
+			if [[ $inject_mem == 1 ]]; then
+				cancel_mem_err
+			fi
+			cancel_io_err
+
+			# UBI could become ro-mode, reload it
+			modprobe -r ubifs
+			modprobe -r ubi
+			modprobe ubi mtd="$mtdnum,$page_size" || fatal "modprobe ubi2 fail"
+			modprobe ubifs || fatal "modprobe ubifs3 fail"
+		done
+
+		fsck.ubifs -yb $DEV 2>&1 > $LOG_FILE
+		res=$?
+		cat $LOG_FILE
+		let "ret=$res&~$FSCK_NONDESTRUCT"
+		if [[ $ret != $FSCK_OK ]]
+		then
+			# Skip superblock error
+			log=`cat $LOG_FILE | grep "bad node at LEB 0:"`
+			if [[ "$log" != "" ]]
+			then
+				skip=1
+				echo "SB is corrupted, skip fsck & mounting"
+			else
+				fatal "fsck fail $res"
+			fi
+		fi
+
+		if [[ $skip == 0 ]]; then
+			enable_chkfs
+
+			mount_ubifs $DEV $MNT "noauthentication" "noatime"
+			res=$?
+			if [[ $res != 0 ]]
+			then
+				fatal "mount fail $res"
+			fi
+
+			if [[ "$encryption" == "encrypted" ]]; then
+				# Ignore the encrypting error, root dir could be
+			        # corrupted, the new root dir cannot be
+			        # encrypted because it is not empty.
+				encryption_set_key $MNT 1
+			fi
+
+			du -sh $MNT > /dev/null  # Make sure all files are accessible
+			ret=$?
+			if [[ $ret != 0 ]]; then
+				fatal "Cannot access all files"
+			fi
+			# check_err_msg is not suggested in this testcase, because
+			# ubi_io_read(triggered by wear_leveling_worker -> ubi_eba_copy_leb)
+			# could print stack if ecc uncorrectable errors are detected.
+
+			umount $MNT
+			res=$?
+			if [[ $res != 0 ]]
+			then
+				fatal "unmount fail $res"
+			fi
+		fi
+
+		modprobe -r ubifs
+		modprobe -r ubi
+	fi
+	modprobe -r $simulator
+
+	echo "----------------------------------------------------------------------"
+}
+
+check_fsstress
+start_t=$(date +%s)
+echo "Do corrruption+cycle_fsck_fault_injection test in kinds of flashes"
+for simulator in "mtdram" "nandsim"; do
+	for encryption in "encrypted" "noencrypted"; do
+		run_test "$simulator" "16" "16" "512" $encryption
+		run_test "$simulator" "256" "128" "2048" $encryption
+		run_test "$simulator" "1024" "512" "2048" $encryption
+	done
+done
+end_t=$(date +%s)
+time_cost=$(( end_t - start_t ))
+echo "Success, cost $time_cost seconds"
+exit 0
diff --git a/tests/ubifs_tools-tests/lib/common.sh.in b/tests/ubifs_tools-tests/lib/common.sh.in
index 5a07ebc..a27fe10 100755
--- a/tests/ubifs_tools-tests/lib/common.sh.in
+++ b/tests/ubifs_tools-tests/lib/common.sh.in
@@ -234,12 +234,13 @@ function encryption_gen_key()
 function encryption_set_key()
 {
 	mnt=$1
+	ignore_err=$2
 	# https://github.com/google/fscryptctl
 	key=$(fscryptctl add_key $mnt < $KEY_FILE)
 	fscryptctl set_policy $key $mnt
 	#fscryptctl get_policy $mnt
 	ret=$?
-	if [[ $ret != 0 ]]; then
+	if [[ $ret != 0 && $ignore_err != 1 ]]; then
 		fatal "set encryption policy failed"
 	fi
 }