aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorArtem Bityutskiy <artem.bityutskiy@linux.intel.com>2012-08-03 11:33:07 +0300
committerArtem Bityutskiy <artem.bityutskiy@linux.intel.com>2012-08-03 11:33:07 +0300
commitc97af410a2b1ee06b121e2fcb91449d10df530fb (patch)
tree8dbcc4066b0c1093708edb674c49f5679ca2e1ac
parenta2a62b09c8fc6d7e3018d61b89fe1cebfc468802 (diff)
stress-test.sh: develop the test further
Add a lot of test passes on nandsim with different geometry. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
-rwxr-xr-xtests/ubi-tests/stress-test.sh141
1 files changed, 112 insertions, 29 deletions
diff --git a/tests/ubi-tests/stress-test.sh b/tests/ubi-tests/stress-test.sh
index c92525e..2d780b1 100755
--- a/tests/ubi-tests/stress-test.sh
+++ b/tests/ubi-tests/stress-test.sh
@@ -1,7 +1,7 @@
#!/bin/sh -euf
srcdir="$(readlink -ev -- ${0%/*})"
-PATH="$srcdir:$PATH"
+PATH="$srcdir:$srcdir/../..:$PATH"
fatal()
{
@@ -46,13 +46,86 @@ find_mtd_device()
printf "%s" "$(grep "$1" /proc/mtd | sed -e "s/^mtd\([0-9]\+\):.*$/\1/")"
}
-exit_handler()
+# Just print parameters of the 'run_test' funcion in a user-friendly form.
+print_params()
{
- echo exit
- cleanup
+ local module="$1"; shift
+ local size="$1"; shift
+ local peb_size="$1"; shift
+ local page_size="$1"; shift
+ local fastmap="$1"; shift
+ local fm_str
+
+ if [ "$fastmap" = "0" ]; then
+ fm_str="disabled"
+ else
+ fm_str="enabled"
+ fi
+
+ printf "%s" "${size}MiB $module with ${peb_size}KiB PEB, "
+ [ "$module" != "nandsim" ] || printf "%s" "${page_size}KiB NAND pages, "
+ printf "%s\n" "fastmap $fm_str"
}
-runtests="runtests.sh"
+print_separator()
+{
+ echo "======================================================================"
+}
+
+# Run a test on nandsim or mtdram with certain geometry.
+# Usage: run_test <nandsim|mtdram> <flash size> <PEB size> <Page size> <FM>
+#
+# Flash size is specified in MiB
+# PEB size is specified in KiB
+# Page size is specified in bytes
+# If fast-map should be enabled, pass 0 or 1
+run_test()
+{
+ local module="$1";
+ local size="$2";
+ local peb_size="$3";
+ local page_size="$4";
+ local fastmap="$5";
+ local fm_supported fm_str fm_param mtdnum
+
+ print_separator
+
+ # Check if fastmap is supported
+ if modinfo ubi | grep -q fm_auto; then
+ fm_supported="yes"
+ else
+ fm_supported="no"
+ fi
+
+ if [ "$fastmap" = "0" ]; then
+ fm_str="disabled"
+ fm_param=
+ elif [ "$fm_supported" = "yes" ]; then
+ fm_str="enabled"
+ fm_param="fm_auto"
+ else
+ echo "Fastmap is not supported, will test without fastmap"
+ fm_str="disabled"
+ fm_param=
+ fi
+
+ if [ "$module" = "nandsim" ]; then
+ print_params "$@"
+
+ load_nandsim.sh "$size" "$peb_size" "$page_size" ||
+ echo "Cannot load nandsim, test skipped"
+
+ mtdnum="$(find_mtd_device "$nandsim_patt")"
+ else
+ fatal "$module is not supported"
+ fi
+
+ modprobe ubi mtd="$mtdnum" $fm_param
+ runtests.sh /dev/ubi0 ||:
+
+ sudo rmmod ubi
+ sudo rmmod "$module"
+}
if [ "$#" -lt 1 ] || [ "$1" != "run" ]; then
usage
@@ -69,27 +142,37 @@ mtdram_patt="mtdram test device"
rmmod ubi >/dev/null 2>&1 ||:
-if modinfo ubi | grep -q fm_auto; then
- fastmap_supported="yes"
-else
- fastmap_supported="no"
-fi
-
-echo "=================================================="
-echo "512MiB nandsim, 2KiB NAND pages, no fastmap"
-echo "=================================================="
-
-modprobe nandsim first_id_byte=0x20 second_id_byte=0xac \
- third_id_byte=0x00 fourth_id_byte=0x15
-mtdnum="$(find_mtd_device "$nandsim_patt")"
-modprobe ubi mtd="$mtdnum"
-$runtests /dev/ubi0 && echo "SUCCESS" || echo "FAILURE"
-
-echo "=================================================="
-echo "256MiB nandsim, 512-byte NAND pages, no fastmap"
-echo "=================================================="
-
-modprobe nandsim first_id_byte=0x20 second_id_byte=0x71
-mtdnum="$(find_mtd_device "$nandsim_patt")"
-modprobe ubi mtd="$mtdnum"
-$runtests /dev/ubi0 && echo "SUCCESS" || echo "FAILURE"
+print_separator
+print_separator
+
+for fm in 1 2; do
+ run_test "nandsim" "16" "16" "512" "$fm"
+ run_test "nandsim" "32" "16" "512" "$fm"
+ run_test "nandsim" "64" "16" "512" "$fm"
+ run_test "nandsim" "128" "16" "512" "$fm"
+ run_test "nandsim" "256" "16" "512" "$fm"
+
+ run_test "nandsim" "64" "64" "2048" "$fm"
+ run_test "nandsim" "128" "64" "2048" "$fm"
+ run_test "nandsim" "256" "64" "2048" "$fm"
+ run_test "nandsim" "512" "64" "2048" "$fm"
+ run_test "nandsim" "1024" "64" "2048" "$fm"
+
+ run_test "nandsim" "64" "128" "2048" "$fm"
+ run_test "nandsim" "128" "128" "2048" "$fm"
+ run_test "nandsim" "256" "128" "2048" "$fm"
+ run_test "nandsim" "512" "128" "2048" "$fm"
+ run_test "nandsim" "1024" "128" "2048" "$fm"
+
+ run_test "nandsim" "64" "256" "2048" "$fm"
+ run_test "nandsim" "128" "256" "2048" "$fm"
+ run_test "nandsim" "256" "256" "2048" "$fm"
+ run_test "nandsim" "512" "256" "2048" "$fm"
+ run_test "nandsim" "1024" "256" "2048" "$fm"
+
+ run_test "nandsim" "64" "512" "2048" "$fm"
+ run_test "nandsim" "128" "512" "2048" "$fm"
+ run_test "nandsim" "256" "512" "2048" "$fm"
+ run_test "nandsim" "512" "512" "2048" "$fm"
+ run_test "nandsim" "1024" "512" "2048" "$fm"
+done