tests: ubi: add stress-test.sh

It is not finished yet, but it will run all tests on nandsim and mtdram
of different geometry.

Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

1 files changed, 95 insertions, 0 deletions

diff --git a/tests/ubi-tests/stress-test.sh b/tests/ubi-tests/stress-test.sh
new file mode 100755
index 0000000..ad9a2af
--- /dev/null
+++ b/tests/ubi-tests/stress-test.sh
@@ -0,0 +1,95 @@
+#!/bin/sh -euf
+
+srcdir="$(readlink -ev -- ${0%/*})"
+PATH="$srcdir:$PATH"
+
+fatal()
+{
+	echo "Error: $1" 1>&2
+	exit 1
+}
+
+usage()
+{
+	cat 1>&2 <<EOF
+Stress-test an UBI device. This test is basically built on top of
+'runtests.sh' and runs it several times for different configurations.
+
+The nandsim and mtdram drivers have to be compiled as kernel modules.
+
+Usage:
+  ${0##*/} run
+EOF
+}
+
+cleanup_handler()
+{
+	local ret="$1"
+	rmmod ubi >/dev/null 2>&1 ||:
+	rmmod nandsim >/dev/null 2>&1 ||:
+	rmmod mtdram >/dev/null 2>&1  ||:
+
+	# Below is magic to exit with correct exit code
+	if [ "$ret" != "0" ]; then
+		trap false EXIT
+	else
+		trap true EXIT
+	fi
+}
+trap 'cleanup_handler $?' EXIT
+trap 'cleanup_handler 1' HUP PIPE INT QUIT TERM
+
+# Find MTD device number by pattern in /proc/mtd
+# Usage: find_mtd_device <pattern>
+find_mtd_device()
+{
+	printf "%s" "$(grep "$1" /proc/mtd | sed -e "s/^mtd\([0-9]\+\):.*$/\1/")"
+}
+
+exit_handler()
+{
+	echo exit
+	cleanup
+}
+
+runtests="runtests.sh"
+
+if [ "$#" -lt 1 ] || [ "$1" != "run" ]; then
+	usage
+	exit 1
+fi
+
+# Make sure neither mtdram nor nandsim are used
+nandsim_patt="NAND simulator"
+mtdram_patt="mtdram test device"
+! cat /proc/mtd | grep -q "$nandsim_patt" ||
+	fatal "the nandsim driver is already used"
+! cat /proc/mtd | grep -q "$mtdram_patt" ||
+	fatal "the mtdram driver is already used"
+
+rmmod ubi >/dev/null 2>&1 ||:
+
+if modinfo ubi | grep -q fm_auto; then
+	fastmap_supported="yes"
+else
+	fastmap_supported="no"
+fi
+
+echo "=================================================="
+echo "512MiB nandsim, 2KiB NAND pages, no fastmap" 
+echo "=================================================="
+
+modprobe nandsim first_id_byte=0x20 second_id_byte=0xac \
+		 third_id_byte=0x00 fourth_id_byte=0x15
+mtdnum="$(find_mtd_device "$nandsim_patt")"
+modprobe ubi mtd="$mtdnum"
+$runtests /dev/ubi0 && echo "SUCCESS" || echo "FAILURE"
+
+echo "=================================================="
+echo "256MiB nandsim, 512-byte NAND pages, no fastmap" 
+echo "=================================================="
+
+modprobe nandsim first_id_byte=0x20 second_id_byte=0x71
+mtdnum="$(find_mtd_device "$nandsim_patt")"
+modprobe ubi mtd="$mtdnum"
+$runtests /dev/ubi0 && echo "SUCCESS" || echo "FAILURE"