summaryrefslogtreecommitdiff
path: root/tar
AgeCommit message (Collapse)Author
2019-09-20Remove usage of sqfs reader from sqfs2tarDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-15Move condensed-sparse-file handling to libsquashfsDavid Oberhollenzer
Add another helper function for getting a blocks from a condensed sparse file, then rewrite the data writer to use that instead, using an sqfs_file_t pointer instead of direct file i/o. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-15Move sparse_map_t to libsquashfs headers, rename it to sqfs_sparse_map_tDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-15Replace file descriptor IO in data_writer with sqfs_file_tDavid Oberhollenzer
First, this commit moves the create-blocks-from-fd function over to libsquashfs and ports it to work on an sqfs_file_t instead. Second, the function in the data_writer that reads from a file descriptor is adjusted to use an sqfs_file_t instead. Finally, the tools that use it have to be adjusted accordingly. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-14Remove fstree file flagsDavid Oberhollenzer
As a side effect, this requires the data writer to keep track of statistics. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-10Make the thread pool queue backlog user configurableDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-09Remove ad-hoc image size accountingDavid Oberhollenzer
Much simpler to just set the correct size in the end, before writing the super block. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-08Replace direct file I/O with abstraction layerDavid Oberhollenzer
This should make it easier to use libsquashfs with custom setups that embedd a squashfs image inside something else. Also, it should make it easier to port to non unix-like platforms. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-05Cleanup naming scheme of compressorDavid Oberhollenzer
Add sqfs_* prefix to compressor, move implementation prefix up front. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-05Cleanup: add sqfs_* prefix to id tableDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-01Internalize the layout of the id_table_t structureDavid Oberhollenzer
As an opaque struct it has a chance to change its layout in the future without breaking ABI compatibiliy. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-01Move command line processing stuff out of compressor codeDavid Oberhollenzer
This commit moves stuff like printing help text, command line option processing and enumerating available processors on stdout out of the generic compressor code. The option string is replaced with a structure that directly exposese the tweakable parameters for all compressors. A function for parsing the command line arguments into this structure is added in sqfshelper. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-01Break up squashfs.h into topic related headersDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-01Install libsquashfs.so headers on the system in "sqfs" subdirectoryDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-31Turn libsquashfs.a into a shared libraryDavid Oberhollenzer
This of course entails turning the entire project over to libtool magic. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-31Split libsquashfs.a into low seperate librariesDavid Oberhollenzer
The idea is to make libsquashfs.a independend of libfstree.a, so it becomes a general purpose squashfs manipulation library. All the high level glue code for libfstree.a and utilites that are overly specific with to tools are moved to a seperate librarby. This commit makes the first step by moving the stuff with dependencies on libfstree to a seperate library. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-31Merge libcompress.a into libsquashfs.aDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-26Move tar_fuzz program over to testsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-24Add minimal test program for fuzzing the tar parserDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-23Some simple search/replace cases for allocationDavid Oberhollenzer
This commit exchanges some malloc(x + y * z) patterns that can be found with a simple git grep and are obvious for the new wrappers. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-19Fix packer statisticsDavid Oberhollenzer
Needs regenerating of the file list that was ripped up and rearranged during file packing. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Make data writer use block processorDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Minor interface change to data writerDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18cleanup: internalize deduplication list in data_writerDavid Oberhollenzer
This change removes the need for passing a list of files around for deduplication. Also the deduplication code no longer needs to worry about order, since the file being deduplicated is only added after deduplication is done. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Add pthread based, parallel block processor implementationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-05cleanup: unify all the code that reads squashfs imagesDavid Oberhollenzer
This commit creates a new data structure called 'sqfs_reader_t' that takes care of all the repetetive tasks like opening the file, reading the super block, creating the compressor, deserializing an fstree and creating a data reader. This in turn makes it possible to remove all the duplicate code from rdsquashfs and sqfs2tar. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-04Fix functions with side effect being used inside assertsDavid Oberhollenzer
If -DNDEBUG is set, the entire thing is omitted from the output. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Add ability to sqfs2tar to optionally copy over xattrsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Add ability to write_tar_header to embedd extended attributesDavid Oberhollenzer
This commit patches the tar writer to generate a PAX header with SCHILY xattr key/value pairs if requested. The Schily format is used for two reasons: - It is simple - It is apparently more widely supported than the libarchive format Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-30Add propper copyright headers to all source filesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Add some nice statistics output to tar2sqfs and gensquashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Implement fragment deduplication in data writerDavid Oberhollenzer
The strategy is simple: - The data writer function that write data/fragment blocks get access to the list files. - When writing a fragment, we look for an already written file that has a fragment with the same size and checksum. - If we find one, we throw away the fragment and reuse the existing one. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-24cleanup: remove atime/ctime processing codeDavid Oberhollenzer
This commit removes all the code for parsing and processing atime/ctime and values and related test code. Caring about those is kind of pointless because squashfs can only store mtime in inodes. The only relevant place is when generating a struct stat from a squashfs inode or an fstree node. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-24Enable largefile supportMatt Turner
Requires that config.h be included before other headers, since the macro _FILE_OFFSET_BITS changes the definitions of things like 'struct stat'. I chose to simply include it at the top of every C file and at immediately after the double-inclusion guards of every header. Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-22Add a way to optionally keep the original time stampsDavid Oberhollenzer
First of all, this commit adds a mod_time field to a tree node. When creating the tree node, the field is set from the struct stat. When scanning a directory, the time stamps from the input are used if set. Second, the libsqfs code that reads inodes is modified to store the mod_time from the inode in the fstree node and to write the tree node into a generated inode. Finally, tar2sqfs is modified to optionally keep the timestamps from the tar archive instead of setting defaults. gensquashfs is similarly modified to keep the input timestamps if specified. The result is as follows: - sqfs2tar will always carry the timestamps from the squashfs over to the tar ball. - tar2sqfs will set defaults, unless explicitly asked to preserve the mtime from the tar ball. - gensquashfs can optionally preserve the mtime from the input hierarchy it processes if only --pack-dir is specified. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-21fix possible leak in tar2sqfs if writing xattrs failsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-21Implement generating an inode table for NFS exportDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-16cleanup: move error handling into write_retryDavid Oberhollenzer
If write_retry fails to write everything, it is *always* an error. This commit renames write_retry to write_data and moves error handling into the function, making a lot of error handling code redundant. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-15Add flags to data writer to micro manage behaviourDavid Oberhollenzer
The added flags allow controlling the following on a per file level: - forcing a file to be written uncompressed - forcing a file to not have a fragment, i.e. the last truncated block actually being written as a block - padding a file to be alligned to device block size The flags are not yet exposed to anything user controllable (such as command line flags). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-04Fix: tar2sqfs move skip for invalid name firstDavid Oberhollenzer
If the name is missing or invalid, set the skip flag to true to skip the tar record and use the same skip logic as for the others. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-04tar2sqfs: repack extended attributes into squashfs filesystemDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-04sqfs2tar: add option to extract subdirectoriesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-03Add no-skip option to sqfs2tarDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-03tar writer: replace PAX headers with GNU extensionsDavid Oberhollenzer
Some experiments seem to indicate that the various GNU extensions are more widely supported than their POSIX equivalents[1]. Possibly because they are easier to implement and possibly because of the wide spread use of GNU tar. This commit replaces the PAX writer in the write_tar_header implementation with a GNU extension based writer. The writer is also cleaned up by removing all global state. The record counter is moved outside into the tar2sqfs program and passed in as function argument. [1] https://dev.gentoo.org/~mgorny/articles/portability-of-tar-features.html Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-03Add no-skip option to tar2sqfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-30libtar: clarify actual size vs on-disk record sizeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-30Add support for repacking condensed sparse filesDavid Oberhollenzer
This commit broadly does the following things: - Rename and move the sparse mapping structure to libutil - Add a function to the data writer for writing condensed versions of sparse files, given the mapping. - This shares code with the already existing function for regular files. The shared code is moved to a common helper function. - Add support to tar2sqfs for repacking sparse files. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-28Add support for unpacking sparse files as sparse filesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-23tar2sqfs: Fix help stringDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-23Add block size and device block size options to tar2sqfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>