| Age | Commit message (Collapse) | Author |
|---|
|
This is a fully automated search and replace, i.e. I ran this:
git grep -l uint8_t | xargs sed -i 's/uint8_t/sqfs_u8/g'
git grep -l uint16_t | xargs sed -i 's/uint16_t/sqfs_u16/g'
git grep -l uint32_t | xargs sed -i 's/uint32_t/sqfs_u32/g'
git grep -l uint64_t | xargs sed -i 's/uint64_t/sqfs_u64/g'
git grep -l int8_t | xargs sed -i 's/int8_t/sqfs_s8/g'
git grep -l int16_t | xargs sed -i 's/int16_t/sqfs_s16/g'
git grep -l int32_t | xargs sed -i 's/int32_t/sqfs_s32/g'
git grep -l int64_t | xargs sed -i 's/int64_t/sqfs_s64/g'
and than added the appropriate definitions to sqfs/predef.h
The whole point being better compatibillity with platforms that may
not have an stdint.h with the propper definitions.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Now that dir_info_t and file_info_t have reasonably small, use them in
tree_node_t directly instead of doing pointer arithmetic magic on the
payload area.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- The write_data_from_file function no longer needs the block size
- Also remove the old data writer flags, pass the flags argument
directly to the begin-file function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- Move the statstics hooks to the rest of the statistics code
- Used the new data writer directly in gensquashfs & tar2sqfs
- Demote what is left to a helper function for processing an
input file and submitting it to the new data writer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This only exists for tar2sqfs. Move the sparse file map to libtar
and add the ability to do this into the stind sqfs_file_t abstraction,
so it acts like a normal file but internally stitches the data
together from the sparse implementation.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Changes are minor, but needs some temporary hacks in fstree again.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- file list is no longer needed for statistics
- the size field in the directory info structure is no longer in use
- sqfs2tar, rdsquashfs and sqfsdiff no longer depend on libfstree.a
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add another helper function for getting a blocks from a condensed sparse
file, then rewrite the data writer to use that instead, using an
sqfs_file_t pointer instead of direct file i/o.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
First, this commit moves the create-blocks-from-fd function over to
libsquashfs and ports it to work on an sqfs_file_t instead.
Second, the function in the data_writer that reads from a file descriptor
is adjusted to use an sqfs_file_t instead.
Finally, the tools that use it have to be adjusted accordingly.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
As a side effect, this requires the data writer to keep track of
statistics.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Much simpler to just set the correct size in the end, before writing
the super block.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This should make it easier to use libsquashfs with custom setups that
embedd a squashfs image inside something else. Also, it should make
it easier to port to non unix-like platforms.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add sqfs_* prefix to compressor, move implementation prefix up front.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
As an opaque struct it has a chance to change its layout in the future
without breaking ABI compatibiliy.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit moves stuff like printing help text, command line option
processing and enumerating available processors on stdout out of
the generic compressor code.
The option string is replaced with a structure that directly exposese
the tweakable parameters for all compressors. A function for parsing
the command line arguments into this structure is added in sqfshelper.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Needs regenerating of the file list that was ripped up and rearranged
during file packing.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This change removes the need for passing a list of files around for
deduplication. Also the deduplication code no longer needs to worry
about order, since the file being deduplicated is only added after
deduplication is done.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The strategy is simple:
- The data writer function that write data/fragment blocks get
access to the list files.
- When writing a fragment, we look for an already written file that has
a fragment with the same size and checksum.
- If we find one, we throw away the fragment and reuse the existing one.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit removes all the code for parsing and processing atime/ctime
and values and related test code.
Caring about those is kind of pointless because squashfs can only store
mtime in inodes. The only relevant place is when generating a struct
stat from a squashfs inode or an fstree node.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Requires that config.h be included before other headers, since the macro
_FILE_OFFSET_BITS changes the definitions of things like 'struct stat'.
I chose to simply include it at the top of every C file and at
immediately after the double-inclusion guards of every header.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
First of all, this commit adds a mod_time field to a tree node. When
creating the tree node, the field is set from the struct stat. When
scanning a directory, the time stamps from the input are used if set.
Second, the libsqfs code that reads inodes is modified to store the
mod_time from the inode in the fstree node and to write the tree node
into a generated inode.
Finally, tar2sqfs is modified to optionally keep the timestamps from
the tar archive instead of setting defaults. gensquashfs is similarly
modified to keep the input timestamps if specified.
The result is as follows:
- sqfs2tar will always carry the timestamps from the squashfs over
to the tar ball.
- tar2sqfs will set defaults, unless explicitly asked to preserve
the mtime from the tar ball.
- gensquashfs can optionally preserve the mtime from the input
hierarchy it processes if only --pack-dir is specified.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The added flags allow controlling the following on a per file level:
- forcing a file to be written uncompressed
- forcing a file to not have a fragment, i.e. the last truncated block
actually being written as a block
- padding a file to be alligned to device block size
The flags are not yet exposed to anything user controllable (such as
command line flags).
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If the name is missing or invalid, set the skip flag to true to skip
the tar record and use the same skip logic as for the others.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit broadly does the following things:
- Rename and move the sparse mapping structure to libutil
- Add a function to the data writer for writing condensed versions
of sparse files, given the mapping.
- This shares code with the already existing function for regular
files. The shared code is moved to a common helper function.
- Add support to tar2sqfs for repacking sparse files.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of decomposing a default string in gensquashfs option processing,
move that to fstree_init instead and pass the option string directly to
fstree_init.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Make tree node list sort and recursive variant available and independend
of the fstree_t.
This is considered cleaner, since the fstree_t actually isn't needed for
any of this and we can just call the recusvie sort on the root instead,
and we can use the sort implementation directly for things like the
upcoming unit test.
Also this commit splits up the merge/sort implementation into a seperate
split and merge functions to make the code somewhat more readable.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
