| Age | Commit message (Collapse) | Author |
|---|
|
Instead of having 3 different functions for sorting the tree, numbering
the nodes and generating a file list, that all have to be used in the
right order, this commit merges them into a single "fstree_post_process"
function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of returning the ID through a pointer and an error code as
return status, return a single int that could be a compressor ID
(positive values) or an error code (negative values).
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
There were only a hand full of instances outside libsquashfs that used
the alloc code. In most cases, the thing allocated hat its size derived
from something already in memory anyway, so it is safe to assume its
size fits into a size_t.
At the same time, the opencoded Windows path conversion functions are
all unified into a single helper function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The liblzo2 library is licensed under GPLv2, so it is not possible to
distribute binaries of libsquashfs that link against liblzo2 under
LGPL.
This commit moves the LZO compressor implementation to libcommon,
where this isn't a problem, since the tools themselves are licensed
under GPLv3.
It removes the ability of libsquashfs to read or generate LZO compressed
SquashFS images, but the tools still can.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
In most cases, including unistd.h and fcntl.h was a left over anyway.
In the cases where it was not, move it to compat.h.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- We can only pack directories and files anyway.
- What file modes should we use?
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Since we can reconstruct the path at any time, simply do so instead
of explicitly duplicating and storing it.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
We don't do any directory operations aftwerwards, so we can just
chdir into the input directory.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
That is IMO less confusing and express what it is (i.e. what it has
become) more clearly, i.e. common code shared by the utilities.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
It only contains helpers for _common_ stuff for all the utilities. The
actual high level stuff has been moved to libsquashfs a while ago.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This signature was forgotten in commit d758950ac88c (Replace
fstree/sqfshelper xattr code with sqfs_xattr_writer_t) causing the build
to fail without SELinux enabled.
Signed-off-by: Matt Turner <mattst88@gmail.com>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The file_info_t no longer stores the size or other such information,
so there is no need to do a stat on the input file. This also means
that gensquashfs no longer needs to change the working directory when
using the function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit splits the SELinux relabeling function up into 3 parts:
- open the label file
- apply relabeling rules to a given file
- close the label file
The relabeling is done while building the tree (if reading from an
input directory) or in a post process step if reading from a desription
file.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Same rational as for the dir-scanner code: It's actually the only user and
it is going to get a lot closer integerated with libsquashfs.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
It's actually the only user and the dir-scanner xattr code is going
to get a lot closer integerated with libsquashfs.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This is a fully automated search and replace, i.e. I ran this:
git grep -l uint8_t | xargs sed -i 's/uint8_t/sqfs_u8/g'
git grep -l uint16_t | xargs sed -i 's/uint16_t/sqfs_u16/g'
git grep -l uint32_t | xargs sed -i 's/uint32_t/sqfs_u32/g'
git grep -l uint64_t | xargs sed -i 's/uint64_t/sqfs_u64/g'
git grep -l int8_t | xargs sed -i 's/int8_t/sqfs_s8/g'
git grep -l int16_t | xargs sed -i 's/int16_t/sqfs_s16/g'
git grep -l int32_t | xargs sed -i 's/int32_t/sqfs_s32/g'
git grep -l int64_t | xargs sed -i 's/int64_t/sqfs_s64/g'
and than added the appropriate definitions to sqfs/predef.h
The whole point being better compatibillity with platforms that may
not have an stdint.h with the propper definitions.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- The write_data_from_file function no longer needs the block size
- Also remove the old data writer flags, pass the flags argument
directly to the begin-file function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- Move the statstics hooks to the rest of the statistics code
- Used the new data writer directly in gensquashfs & tar2sqfs
- Demote what is left to a helper function for processing an
input file and submitting it to the new data writer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Changes are minor, but needs some temporary hacks in fstree again.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- file list is no longer needed for statistics
- the size field in the directory info structure is no longer in use
- sqfs2tar, rdsquashfs and sqfsdiff no longer depend on libfstree.a
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
First, this commit moves the create-blocks-from-fd function over to
libsquashfs and ports it to work on an sqfs_file_t instead.
Second, the function in the data_writer that reads from a file descriptor
is adjusted to use an sqfs_file_t instead.
Finally, the tools that use it have to be adjusted accordingly.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
As a side effect, this requires the data writer to keep track of
statistics.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Much simpler to just set the correct size in the end, before writing
the super block.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This should make it easier to use libsquashfs with custom setups that
embedd a squashfs image inside something else. Also, it should make
it easier to port to non unix-like platforms.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add sqfs_* prefix to compressor, move implementation prefix up front.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
As an opaque struct it has a chance to change its layout in the future
without breaking ABI compatibiliy.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit moves stuff like printing help text, command line option
processing and enumerating available processors on stdout out of
the generic compressor code.
The option string is replaced with a structure that directly exposese
the tweakable parameters for all compressors. A function for parsing
the command line arguments into this structure is added in sqfshelper.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
