| Age | Commit message (Collapse) | Author |
|---|
|
As a side effect, this requires the data writer to keep track of
statistics.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Much simpler to just set the correct size in the end, before writing
the super block.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This should make it easier to use libsquashfs with custom setups that
embedd a squashfs image inside something else. Also, it should make
it easier to port to non unix-like platforms.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add sqfs_* prefix to compressor, move implementation prefix up front.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
As an opaque struct it has a chance to change its layout in the future
without breaking ABI compatibiliy.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit moves stuff like printing help text, command line option
processing and enumerating available processors on stdout out of
the generic compressor code.
The option string is replaced with a structure that directly exposese
the tweakable parameters for all compressors. A function for parsing
the command line arguments into this structure is added in sqfshelper.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Needs regenerating of the file list that was ripped up and rearranged
during file packing.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This change removes the need for passing a list of files around for
deduplication. Also the deduplication code no longer needs to worry
about order, since the file being deduplicated is only added after
deduplication is done.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The strategy is simple:
- The data writer function that write data/fragment blocks get
access to the list files.
- When writing a fragment, we look for an already written file that has
a fragment with the same size and checksum.
- If we find one, we throw away the fragment and reuse the existing one.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of doing DFS on the fly in gensquashfs, churn out a linked list
of all files in an archive.
Future improvements in packing strategies can go into this file.
This can also be usefull for other purposes in the future, such as file
deduplication or as a work queue for the unpacker.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The utility programs pretty much all have the same structure of including
one central header per C file that includes all required library headers,
so we can simply include config.h which we need for large file support
from there and remove it from the C files.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Requires that config.h be included before other headers, since the macro
_FILE_OFFSET_BITS changes the definitions of things like 'struct stat'.
I chose to simply include it at the top of every C file and at
immediately after the double-inclusion guards of every header.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
First of all, this commit adds a mod_time field to a tree node. When
creating the tree node, the field is set from the struct stat. When
scanning a directory, the time stamps from the input are used if set.
Second, the libsqfs code that reads inodes is modified to store the
mod_time from the inode in the fstree node and to write the tree node
into a generated inode.
Finally, tar2sqfs is modified to optionally keep the timestamps from
the tar archive instead of setting defaults. gensquashfs is similarly
modified to keep the input timestamps if specified.
The result is as follows:
- sqfs2tar will always carry the timestamps from the squashfs over
to the tar ball.
- tar2sqfs will set defaults, unless explicitly asked to preserve
the mtime from the tar ball.
- gensquashfs can optionally preserve the mtime from the input
hierarchy it processes if only --pack-dir is specified.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The added flags allow controlling the following on a per file level:
- forcing a file to be written uncompressed
- forcing a file to not have a fragment, i.e. the last truncated block
actually being written as a block
- padding a file to be alligned to device block size
The flags are not yet exposed to anything user controllable (such as
command line flags).
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of decomposing a default string in gensquashfs option processing,
move that to fstree_init instead and pass the option string directly to
fstree_init.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit removes the packdir/packfile based directory setup magic
from fstree_from_file and moves it to gensquashfs. Over there, the
common parts are deduplicated.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Make tree node list sort and recursive variant available and independend
of the fstree_t.
This is considered cleaner, since the fstree_t actually isn't needed for
any of this and we can just call the recusvie sort on the root instead,
and we can use the sort implementation directly for things like the
upcoming unit test.
Also this commit splits up the merge/sort implementation into a seperate
split and merge functions to make the code somewhat more readable.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit moves the SELinux label code after the tree is sorted and
the inode table is generated. Sorting helps to make sure that the tree
will always be traversed in a defined, deterministic order and likewise
the creation of xattrs happens in a defined, deterministic order.
Second, we can now use the inode table instead of having to implement a
recursive tree traversal yet again.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of allocating inode numbers as we go, generate and populat an
inode table from the fstree ahead of time. This makes processing nodes
a little bit simpler and we will need that table anyway for NFS export
support later on.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If packdir and packfile are both specified, use packdir as
alternate root.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- gensquashfs simply asks the backend compressor to write its options
to the file and does accounting
- rdsquasfs simply asks the backend compressor to transparentyl snort
the options from the file
- not implemented in any compressor backend yet
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit changes the names of the tools to gensquashfs and rdsquashfs
so they don't collide with the names used by the squashfs-tools package
and the two can be installed side by side.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
