aboutsummaryrefslogtreecommitdiff
path: root/lib
AgeCommit message (Collapse)Author
2020-09-16Implement ostream compressor wrapperDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-09-16Remodel file extraction tools to use libfstreamDavid Oberhollenzer
This commit rewrites the libtar write paths to use libfstream insead of a FILE pointer. Also, the libcommon file extraction function is remodeled to use libfstream. In accordance, rdsquashfs, sqfs2tar and sqfsdiff have some minor adjustments made to work with the ported libtar and libcommon. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-09-16Implement a data writer based output streamDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-09-16Add stream I/O abstraction libraryDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-09-03Fix integer bounds checking in GNU tar sparse format 1.0 parserDavid Oberhollenzer
- Make sure the file actually has that many records before trying to read one and fail if not. - Use the helper macros for size_t overflow checking instead of assuming size_t == uint64_t. - Impose a "reasonable" upper bound on the number of data segments and insist that there is at least one entry. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-09-02Fix nonexistant gnu tar sparse format 1.0 supportDavid Oberhollenzer
Contrary to previous claims, support for the GNU tar sparse format 1.0 was missing entirely (the newest of their 3 different sparse mapping formats). This oversight wasn't caught, because the unit test was compiling the wrong source file and tar2sqfs had no problem processing the test file because it is still a valid POSIX-ish tar archive (but the sparse part was missing and the mapping embedded in the file). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-08-26Fix tree node path generation for detached sub treesDavid Oberhollenzer
The function sqfs_tree_node_get_path is used in several places within rdsquashfs to produce a path for a tree node, either when describing the file system, or when unpacking it. Unpacking can be done on sub-trees as well as the entire tree, in which case the root of the sub-tree has its parent pointer removed, so the full path terminates at the new root. This works with directories, since they receive special case handling anyway, but fails if the sub-tree to unpack is only a single file because the sqfs_tree_node_get_path function assumes that we are at the tree root and returns "/" as a path, which gets normalized to "". This commit adds a workaround to the function to simply use the nodes name (if available) in that case instead. The describe case in rdsquashfs is unaffacted, since it always starts at the root. Likewise, the sqfs2tar case should also be unaffacted, since it already employs special case handling for the [sub] tree root node. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-08-16Fix libtar treatment of link targets that fill the header fieldDavid Oberhollenzer
The tar header has a 100 byte field for symlink and hard link targets. If the target is longer than 100 bytes, an extension header has to be used. However, it is perfectly valid to fill all 100 bytes to the brim without adding a null terminator. In case of a symlink, this can result in garbage link targets, while for hard links it results in an immediate error since the target cannot be resolved later on. This commit attempts to fix the problem by replacing the strdup of the link target with an strndup that copies at most the size of the target header field. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-08-12Fix block processor single block with don't fragment flag bugDavid Oberhollenzer
This commit fixes a bug where the block processor state machine would not add the "last block" flag if there is only one not entirely filled block and the "don't fragment" flag is set. If the flag isn't set, the inode start block position is not updated and points to the beginning of the image instead. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-08-04Cleanup: move zlib/lz4 code from lib/sqfs/comp/ to lib/David Oberhollenzer
The source code of a modified liblz4 and zlib are included with the option to compile them into libsquashfs if they are not available on the system. So far, the source code was included directly in the compressor sub directory within libsqsuashfs. This commit moves the libraries out into the lib directory. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-07-29Fix: xattr reader: read the header after seaking to an OOL valueDavid Oberhollenzer
If an xattr value is stored OOL, the value actually holds an 8 byte reference to another, previously stored value. This reference points to the header that we need to read to know the actual size of the value before reading it, not the value itself, so after reading the reference and seeking to it, the xattr reader needs to read the actual header. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-20Fix block bounds checking in libsquashfs data readerDavid Oberhollenzer
Instead of doing the fragile size comparison in both loops, simply bail from the function if offset is out of bounds, clamp the size to the available range of the file and abail if it is zero. As a result, a lot of checks can be removed and the function will not return data beyond EOF. This problem occoured with files that have a short last block instead of a fragment. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-13Fix: don't include alloca.h on systems that don't provide this headerv1.0.0David Oberhollenzer
This commit fixes a build issue on BSD based systems, where alloca is defined in stdlib.h and there is no such thing as "alloca.h". Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-13Bump the so version number for libsquashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-12Add an explicit defition for the libsquashfs so versionDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-11Add flags to functions that might logically be expanded in the futureDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-09Cleanup: mark sqfs_xattr_writer_flush writer argument as constDavid Oberhollenzer
It does not make any changes to the writer itself, so mark it as const. This also requires some similar changes to the string table. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-09Cleanup: remove refcount adjusting in sqfs_xattr_writer_endDavid Oberhollenzer
After finding a match, reducing the reference count of the matched elements and increasing them afterwards leaves the reference count identical, because they refere to the same entries. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-09Cleanup: split libsquashfs xattr writer codeDavid Oberhollenzer
This commit moves the libsquashfs xattr related code into a sub directory and splits the xattr writer code up into several files. No actual code is changed. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-07Fix uninitialized error code in block processor error pathDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-07Move the fragment deduplication hash table back into the block processorDavid Oberhollenzer
Fragment deduplication really doesn't belong into the public API of the fragment table. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-07block processor: add an internal common cleanup functionDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04Cleanup: libcommon: use global LUTs for compressor optionsDavid Oberhollenzer
Instead of the convoluted logic, simply use a small number of LUTs that point to the available compressor flags for each compressor, the avaialble options and their ranges. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04Cleanup: Pull compression level parameter out into compressor configDavid Oberhollenzer
Every compressor (except LC4) has a compression level parameter. This commit pulls the compression level field out into the generic configuration structure and applies some code clean ups as a result from this. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04Strictly enfore min/max dictionary size in XZ & LZMA compressorsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04lzma compressor: support micro management optionsDavid Oberhollenzer
The LZMA compressor (through the xz-utils library) supports basically the same options for micro management as the XZ compressor. This commit enables support for those options in the compressor, the option parser and adds an option field to the configuration structure. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04lzma compressor: add support for the "extreme" flagDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-03Cleanup: Add defines for minimum and maximum block sizeDavid Oberhollenzer
This commit adds propper defines in the super block header and removes some of the hard coded constants. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Cleanup: sqfs2tar: break up and simplify the repacking codeDavid Oberhollenzer
- Move the xattr extraction and repacking to xattr.c - Don't on-the-fly delete the tar xattr list, use the function from libtar.a - Split minor tasks into static helper functions - creating a libtar xattr struct from libsqfs xattr data - finding a hard link entry from current path and inode number Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Block processor: cleanup macros, merge windows & pthread initializationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: merge finish & sync functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: allow operation without a fragment tableDavid Oberhollenzer
This commit modifies the block processor to support operating without a fragment table. If that is the case, fragment deduplication is essentially disabled and fragment blocks aren't indexed anymore. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: Add a raw block submission functionDavid Oberhollenzer
This function allows submission of raw blocks to the block processor, completely bypassing the file API. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: add flags to manage hashing & sparse block detectionDavid Oberhollenzer
This commit adds 2 new user settable flags to the block processor: - A flag to ignore sparse blocks and treat them like normal data blocks. - A flag to disable checksum computation altogether. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Support associating a user pointer with data blocksDavid Oberhollenzer
This commit modifies the block processor to support associating a user data pointer with data blocks that it forwards to the block writer, which is modified to accept an optional user data pointer. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: turn internal functions into interface entry pointsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Make the block processor inode management optionalDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Turn the sqfs_block_writer_t into an interfaceDavid Oberhollenzer
This way, everything that could be done through the hooks (and more) can be done by simply providign a custom implementation. The result is a lot clener that the previous hook based version. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29cleanup: libsqfs: eliminate block writer statisticsDavid Oberhollenzer
- the "bytes submitted" can be moved over to the block processor - the number of blocks submitted are already there (implcitily, by adding the data block count to the fragment block count) - actual data bytes written can be computed from the super block - the remaining block count can be changed to simple counter that can be obtained through a function. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29cleanup: libsqfs: remove hooks from sqfs_block_writer_tDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-24Minor fixes/cleanups in the block processorDavid Oberhollenzer
- Move the inode modifications out of do_block. The inode may be reallocated in parallel by the process_completed_block function, so it is not safe to store the fragment location in the do_block function which is used from the worker threads. - Move the accounting of fragment blocks to the process_completed_block function. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-24Cleanup: split the block processor common.c againDavid Oberhollenzer
This commit breaks the common code up again by moving the data submission code to a separate file, making both a little bit more readable. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-24block processor: promote fragments to fragment blocksDavid Oberhollenzer
Instead of [potentially] allocating a new fragment block, take an existing fragment and promote it to the fragmenet block. This saves as a potential block allocation and a memcpy of the initial data. Also it *definitely* removes block allocation from the backend path of the block processor. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23block processor: move the block consolidation to the worker threadDavid Oberhollenzer
Instead of merging fragments into the fragment block inside the process_completed_fragment function, store a linked list of fragments in the fragment block and do the actual merging (several memcpy calls totaling of up to 1M of data in worst case) in the worker thread instead of the locked, serial path. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23block processor: recycle blocks to reduce allocation pressureDavid Oberhollenzer
Instead of freeing/allocating blocks all the time in the locked, serial path, use a free list to "recycle" blocks. Once a block is no longer used, throw it onto the free list. If a new block is, needed try to get one from the free list before calling malloc. After a few iterations, the block processor should stop allocating new blocks and only re-use the ones it already has. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23block processor: don't zero initialize the block payload areaDavid Oberhollenzer
In the block processor, the payload area is only accessed up to the indicated size. Even the part that is accessed is initialized by copying data into the block before increasing the size, so there is no real point in zero-initializing hundres of kilobytes if not megabytes of payload area, especially since this is done in the locked, serial path of the block processor. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21Fix: zstd: actually set the compression level from the optionsDavid Oberhollenzer
In the zstd compressor, the compression level from the configuration structure wasn't used at all. Instead, the zstd compressor was told to use level 0 and compressor options with that parameter were written to disk. This commit makes sure the level parameter is propperly initialized. Reported-by: Sébastien Gross Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21hash table: switch to sqfs_* types, mark functions as hiddenDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21Fix the semantics of the super block deduplicationDavid Oberhollenzer
Its purely informational, but make sure other programs don't print out scary messages that imply the data has been ineficiently. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-19Cleanup: move hash table header to include directoryDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>