| Age | Commit message (Collapse) | Author |
|---|
|
This is a fully automated search and replace, i.e. I ran this:
git grep -l uint8_t | xargs sed -i 's/uint8_t/sqfs_u8/g'
git grep -l uint16_t | xargs sed -i 's/uint16_t/sqfs_u16/g'
git grep -l uint32_t | xargs sed -i 's/uint32_t/sqfs_u32/g'
git grep -l uint64_t | xargs sed -i 's/uint64_t/sqfs_u64/g'
git grep -l int8_t | xargs sed -i 's/int8_t/sqfs_s8/g'
git grep -l int16_t | xargs sed -i 's/int16_t/sqfs_s16/g'
git grep -l int32_t | xargs sed -i 's/int32_t/sqfs_s32/g'
git grep -l int64_t | xargs sed -i 's/int64_t/sqfs_s64/g'
and than added the appropriate definitions to sqfs/predef.h
The whole point being better compatibillity with platforms that may
not have an stdint.h with the propper definitions.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This only exists for tar2sqfs. Move the sparse file map to libtar
and add the ability to do this into the stind sqfs_file_t abstraction,
so it acts like a normal file but internally stitches the data
together from the sparse implementation.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Split the signel file up into several small ones and use a variable
for the public headers instead of duplicating them.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If an extension header is rejected because its too big, the error path
would print the size as size_t, altough it is an uint64_t. On 64 bit
systems, this works because size_t is a 64 bit unsigned integer, on
32 bit systems, not so much.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit patches the tar writer to generate a PAX header with SCHILY
xattr key/value pairs if requested.
The Schily format is used for two reasons:
- It is simple
- It is apparently more widely supported than the libarchive format
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Since they are read directly into memory, blindly allocating the size
from the tar ball is probably a bad idea.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
struct stat uses time_t to store time values. On some 32 bit systems,
this may be a 32 bit integer.
This patch adds a broken-out 64 bit time value to tar_header_decoded_t
and makes sure to clamp the value to +/- (2^32 - 1) if required when
writing it back to a struct stat.
Reported-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit removes all the code for parsing and processing atime/ctime
and values and related test code.
Caring about those is kind of pointless because squashfs can only store
mtime in inodes. The only relevant place is when generating a struct
stat from a squashfs inode or an fstree node.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Requires that config.h be included before other headers, since the macro
_FILE_OFFSET_BITS changes the definitions of things like 'struct stat'.
I chose to simply include it at the top of every C file and at
immediately after the double-inclusion guards of every header.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Until now, the tar checksum verification simply copied the header,
recomputed the checksum and compared it byte-for-byte with the
original.
However, not all implementations store the checksum the same way. For
instance, git-archive generates tar balls that use the same format as
for other octal numbers.
This patch makes the checksum verification more lenient by parsing the
checksum from the header and comparing it with the computed value
instead of copying the entire block and insisting on byte-for-byte
equivalence.
The result is better interoperabillity with existing tools and perhaps
slightly faster processing since the block doesn't have to be copied.
Reported-by: Matt Turner <mattst88@gmail.com>
Suggested-by: René Scharfe <l.s.r@web.de>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If read_retry fails to read the expected amount of data (EOF or otherwise),
it is almost always an error.
This commit renames read_retry to read_data and moves error handling
into the function, making a lot of error handling code redundant.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If write_retry fails to write everything, it is *always* an error.
This commit renames write_retry to write_data and moves error handling
into the function, making a lot of error handling code redundant.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Some experiments seem to indicate that the various GNU extensions are
more widely supported than their POSIX equivalents[1]. Possibly because
they are easier to implement and possibly because of the wide spread
use of GNU tar.
This commit replaces the PAX writer in the write_tar_header implementation
with a GNU extension based writer.
The writer is also cleaned up by removing all global state. The record
counter is moved outside into the tar2sqfs program and passed in as
function argument.
[1] https://dev.gentoo.org/~mgorny/articles/portability-of-tar-features.html
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If the tar header name is exactely 100 bytes long, it does not have a
trailing null byte. Using strlen/strcpy on it effectively concatenates
the following fields contents to it.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit attempts to split some of the monolitic tar parsing code up
into multiple functions in seperate files. Also, some code duplication
(like reading a record into memory which was implemented twice) is
removed.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Mainly to make scan-build happy.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The intention was to free the temporary object in addition to the list.
Since the temp pointer is also used for iterating the list, this resulted
in a double free instead of the intended.
This commit fixes the double free by replacing the recycled variable based
list free with the helper function intended to do this.
Bug found using scan-build.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit broadly does the following things:
- Rename and move the sparse mapping structure to libutil
- Add a function to the data writer for writing condensed versions
of sparse files, given the mapping.
- This shares code with the already existing function for regular
files. The shared code is moved to a common helper function.
- Add support to tar2sqfs for repacking sparse files.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
