| Age | Commit message (Collapse) | Author |
|---|
|
This commit fixes a bug in the fragment table reader where the reader
tries to read data into an out of bounds location due to an oversight
in size calculation.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
In most cases, we know exactely where the data that we want to read is
on disk, so instead of using read() on the squashfs (or lseek + read),
the code can in many places be cleaned up to use the pread wrapper
read_data_at instead.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit removes all the code for parsing and processing atime/ctime
and values and related test code.
Caring about those is kind of pointless because squashfs can only store
mtime in inodes. The only relevant place is when generating a struct
stat from a squashfs inode or an fstree node.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Requires that config.h be included before other headers, since the macro
_FILE_OFFSET_BITS changes the definitions of things like 'struct stat'.
I chose to simply include it at the top of every C file and at
immediately after the double-inclusion guards of every header.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- Bail early on empty directories without touching the meta readers.
- Aport the directory read loop if we can't even read a header anymore,
no matter if there are bytes remaining.
- Also add that same condition to the inner loop.
The later two actually caused a numeric overflow on some particularly
malformed squashfs images, going into a RAM filling infinite loop.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
First of all, this commit adds a mod_time field to a tree node. When
creating the tree node, the field is set from the struct stat. When
scanning a directory, the time stamps from the input are used if set.
Second, the libsqfs code that reads inodes is modified to store the
mod_time from the inode in the fstree node and to write the tree node
into a generated inode.
Finally, tar2sqfs is modified to optionally keep the timestamps from
the tar archive instead of setting defaults. gensquashfs is similarly
modified to keep the input timestamps if specified.
The result is as follows:
- sqfs2tar will always carry the timestamps from the squashfs over
to the tar ball.
- tar2sqfs will set defaults, unless explicitly asked to preserve
the mtime from the tar ball.
- gensquashfs can optionally preserve the mtime from the input
hierarchy it processes if only --pack-dir is specified.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- Store them in a struct instead of a hacky uint64_t with magic shifts
- Split up key/value pair write function to write_key and write_value
- Move the size accounting into those functions respectively
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If read_retry fails to read the expected amount of data (EOF or otherwise),
it is almost always an error.
This commit renames read_retry to read_data and moves error handling
into the function, making a lot of error handling code redundant.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If write_retry fails to write everything, it is *always* an error.
This commit renames write_retry to write_data and moves error handling
into the function, making a lot of error handling code redundant.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Digging around in kernel internals and mksquashfs reveals that it is
actually a buffer offset into the raw directory buffer. The error
hasn't been noted until now because of the bug fixed by a5428e0.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The added flags allow controlling the following on a per file level:
- forcing a file to be written uncompressed
- forcing a file to not have a fragment, i.e. the last truncated block
actually being written as a block
- padding a file to be alligned to device block size
The flags are not yet exposed to anything user controllable (such as
command line flags).
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit extends the special case handling for sparse files to
generically support reading files that don't have a fragment but
instead have a trunkated final block.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The data writer sparse block code can take advantage that it can add a
block size instead of a fragment and doesn't have to initialize the
framgent location.
In return, the tree node to inode serialization code doesn't need a
special case for sparse file anymore and can now also handle files that
are forced to not have a fragment.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit makes sure we write the index count to the inode before
writing out the inode itself.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Tell the directory writer to keep the directory blocks in memory, then
write them out once everything is done and the inodes are all written
out.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of writing meta data blocks directly to disk, the writer can
now alternatively keep the blocks in memory until explicitly told to
write to disk.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The directory listing stores a signed difference of the inode number.
Actually treating it as signed saves emitting extra headers if hard
links or file deduplication are finally implemented.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of insisting that mode bits and inode type match up, determine
ignore the mode bits and determine them from the inode type.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Assuming this code will ever see a big endian platform.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
In case the tables are not completely filled by reading from the
squashfs image.
Bug found using scan-build.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit broadly does the following things:
- Rename and move the sparse mapping structure to libutil
- Add a function to the data writer for writing condensed versions
of sparse files, given the mapping.
- This shares code with the already existing function for regular
files. The shared code is moved to a common helper function.
- Add support to tar2sqfs for repacking sparse files.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit adds support for packing sparse files into squashfs images
as follows:
- In the data writer: simply detect zero blocks and write a zero to the
block size field and don't emit any data. Record the number of bytes
saved this way. For fragments, set the fragment offset to invalid.
- In the inode writer: write out the number of bytes saved for sparse
files. If there should be a fragment but there is none, append a block
count of 0.
- In the data reader: if the block size is 0, read nothing from disk and
emit an empty block. Do the same if the fragment is missing.
- In the inode reader: restore the number of bytes saved for sparse files.
The sparse files can be packed and unpacked, but the unpacking will not
create sparse files for now.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The sparse attribute should be initialized with 0. It is subtracted
from the file size in the kernel to determine the file size on disk
to report to stat(2). So it actually didn't matter anyway (just for
correctness sake).
Second, the fragment index and offset should be set to 0xFFFFFFFF in
the rare case that no fragments exist.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Make tree node list sort and recursive variant available and independend
of the fstree_t.
This is considered cleaner, since the fstree_t actually isn't needed for
any of this and we can just call the recusvie sort on the root instead,
and we can use the sort implementation directly for things like the
upcoming unit test.
Also this commit splits up the merge/sort implementation into a seperate
split and merge functions to make the code somewhat more readable.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Replace default_$FIELD with a struct stat. Merge the rest of
add_node/add_file into mknode and add by path+stat.
Expose the mknode function and replace all the duplicated node pointer
arithmetic magic with a call to mknode.
Plus a generic cleanup by utlizing new util functions.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The idea is to move various higher level helper functions there.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
