| Age | Commit message (Collapse) | Author |
|---|
|
This might be needed externally for things like hard link detection.
For the unix implementation, store the actual inode number here.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
To the sqfs_data_reader_t is added, an sqfs_istream_t implementation
that internally reads through the data reader. The uses of the
data_reader_dump function are removed and the function is subsequently
removed from libcommon.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The recursive part and the filter part are split up, the recursive
iterator wrapper is moved into libsquashfs and the libio iterator
is modified to use that internally instead of implementig the
recursion step.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Exact operation performed:
git ls-files -z | \
xargs -0 sed -i -e 's/dir_entry_t/sqfs_dir_entry_t/g
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Exact operation performed:
git ls-files -z | \
xargs -0 sed -i -e 's/sqfs_dir_entry_t/sqfs_dir_node_t/g'
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Start with a common prefix "sqfs_native_file_*"
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
It is mainly a very thin wrapper on top of the block processor so far.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
By adding additional close/duplicate primitives, the remaining, mostly
identical istream/ostream/file code is mostly identical between Windows
and Unix and be merged, mostly without stitches.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
On Unix like OSes, this saves/restores errno, on Windows both errno
and GetLastError state are saved/restored.
This should make it simpler to preserve that across function calls.
Additionally, while tracking down uses of GetLastError, some places
where the error code was printed out directly where replaced with
instances of w32_perror.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- The ostream creation functions already have flag arguments,
but make them an sqfs_u32 instead of int.
- Add flag arguments to the istream functions, sanitzie and forward
them when opening the handle.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Having a function to interpret the flags and open a native file handle
simplifies the istream/ostream/file code which shares that decoding
part, particularly on windows where the character set needs to be
transformed.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Similar to the sqfs_istream_t & sqfs_ostream_t interfaces.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
For now, only the interfaces and helper functions are moved, the
concrete implementations remain in libio.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of a separate append-sparse function, simply accept NULL
as an input for append. For both Unix and Win32, a fallback needs
to be implemented. For XFRM, we can just memset the input buffer
to zero, same for the libsquashfs data writer.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The common pattern is used in rdsquashfs and sqfs2tar, move the code
to libsquashfs.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The structure and functions are renamed to sqfs_xattr_* instead,
an additional helper is added to accept an encoded xattr.
Documentation and unit test are added as well.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The idea of the block align feature was to allow micro-managing that
some files are forcefully aligned to 1k/4k ("device block") boundaries,
hoping to improve access time at the cost of data density. The feature
was not exposed in the tools for a long time and eventuall added to the
sort file. Measurement and experimentation showed, that it in fact
worsened the read performance on a test system with an old micro SD
card as the bottle neck.
The feature is removed, and if needed, can be brought back simply by
wrapping/sub-classing the default block writer, if need be..
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Implement grab/drop functions to increase/decrease reference count
and destroy the object if the count drops to 0.
Make sure that all objects that maintain internal references actually
grab that reference, duplicate it in the copy function, drop it in
the destroy handler.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
mksquashfs generates extended inodes if a directory contains 256
entries. libsquashfs so far only generated extended inodes if there
is no other way to encode it. Mimic the behaviour of mksquashfs by
adding a threshold.
For this to work, the "sqfs_inode_set_xattr_index" function has to
be changed to not immediately try to demote inodes to basic types.
The fstree serialization is modified to do that itself if the index
is 0xFFFFFFFF and the target is not a directory inode.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
On Linux or BSD distributions we have a native version installed
via package manager. On Windows, we can just build it from source
like the other libraries.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
When (during fragment deduplication) a fragment block is read back
from disk and unpacked, it can happen that it is _exactly_ the
given block size. The bounds check did '>=' instead of '>' and
failed in that case with a "data corruption" error.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Initialize the output compressor pointer to NULL, so if the function
fails, the value is propperly initialized to a NULL pointer instead
of relying on the function user to initialize it.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Slightly modify the byte-for-byte comparison function to compare an
arbitrary range in a file and move it to libutil. Instead of calling
it for each block in the block writer, simply let it check an entire
range in the block writer and compute the range position/size of the
reference ahead, before looking for potential matches.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of open coding it, use the array_t type from libutil.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Test against various invariants:
- Every non-root node must have a name
- The root node muts not have a name
- The name must not be ".." or "."
- The name must not contain '/'
- The loop that chases parent pointers must terminate, i.e. we must
never reach the starting state again (link loop).
Furthermore, make sure the sum of all path components plus separators
does not overflow.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Move all the libutil stuff from the toplevel include/ to a util/
sub directory and fix up the includes that make use of them.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Split out several repated patterns into helper functions and move the
rest of the code back into dir_reader.c
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add a simple directory state object to the meta data reader and use
that to iterate directory entries. The code for reading the directory
listing is movde to readdir.c
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
When asking the meta data reader for its current position and
we *just* read to the end of a block, report the start of the
next block as the current location.
Otherwise, trying to *seek* to the resulting position immediately
after reporting throws an out-of-bounds error.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
On GNU/Linux, *BSD or MacOS we can simply use the system default
library. The copy was primarily only there for the Windows build.
The build script for Windows has now been adapted to download and
compile a shared library from a tarball.
This removes a huge chunk of code from the git tree as well as
the release tarballs. Additionally it gets rid of iffy things like
removing the Zlib copyright/version strings, so the libsquashfs DLL
doesn't export it.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Two flags are added to the dir reader API, one for the create function
that the dir reader should report those entries and one to the open
function to suppress that if it was enabled.
To implement the feature, a mapping of visited directory inodes is
maintained internally, that mapps inode numbers to inode references.
When opening a directory, state is maintained to generate the fake
entries for '.' and '..'. Since all the other functions are based on
the open/read/rewind API, no alterations need to be made. The tree
scan function is modified, to use the suppress flag, so it does not
accidentally catch those entries.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Many library destructor functions (like free()) allow a NULL
pointer as input, and do nothing in that case.
This allows easier cleanup patterns: initialize pointers to NULL
and then always pass them to the destroyer functions, no need for
verbose goto/if-else patterns.
Signed-off-by: Luca Boccassi <luca.boccassi@microsoft.com>
|
|
The block_count is a size_t, so on 32 bit platforms the multiplication
might be truncated before the comparison with filesz.
On 64 bit platforms, it could potentially also overflow the 64 bit
bounds of the data type.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
When opening files on windows, use the widechar versions and convert
from (assumed) UTF-8 to UTF-16 as needed.
Since the broken, code-page-random API may acutall be intended in some
use cases, leave that option in through an additional flag.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Use the same size check as sqfs_dir_reader_open_dir and report EOF,
even if it is possible to read the header itself, but nothing beyond
that.
Also check if it should be possible to read an entry header before
attempting and report EOF if not.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
