| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This removes further clutter from the data writer. Any future efforts
on making fragment by hash lookup faster can focus on that area only
and don't clutter the block processor.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit moves the single use helper functions that are called from
worker thread context into the worker thread function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of doing everything by manually.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Just to be safe in case there needs to be an extension
in the future.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
There are 3 types of extra payload:
- Directory index
- File block sizes
- Symlink target
This commit removes the type specific pointers and modifies the code
to use the payload area directly. To simplify the file block case and
mitigate alignment issues, the type of the extra field is changed to
sqfs_u32.
For symlink target, the extra field can simply be cast to a character
pointer (it had to be cast anyway for most uses). For block sizes,
probably the most common usecase, it can be used as is. For directory
indices, there is a helper function anyway.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
It optionally allows code that does tree traversal to start at an
inode that it obtained previously and makes it easier to keep state
externally.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If the dir writer is used to create the directory table, it neccessarily
sees every single inode number and coresponding location for all inodes
that are referenced by the filesystem tree. This means it can easily
collect that information internally to create an export table later on.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This fixes both the name inside the file, as well as the file name
by adding the major version suffix.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Since they are both structured the same way using condition variables,
they are only a few defines away from removing code duplication.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The idea is as follows: Initially let the user submit blocks until the
queue is filled, then kick of the threads. Every thread will end up
getting a block without any waits until they completely deplete the
queue. Assuming the threads take longer to process the data than it
takes the main thread to do I/O and submit new blocks, the queue should
stay mostly filled with minimal wait times.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- ONLY manipulate the back log counter in the main thread.
- Fix the order of operations when submitting blocks.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The zstd compress function returns an error code if it cannot fit the
compressed data into the given destination buffer.
This commit adds a check for this error and reports that the
libsquashfs compressor implementation was unable to shrink the input
instead of claiming a fatal error happened.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
It's cleaner, more stable and works pretty much the same way as the
pthread version. The downside is that the minimum target for the
library is now Windows Vista, or Server 2008. But both are over a
decade old anyway, so this shouldn't be an issue.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Move "do block" function over to the rest of the block related
code and internalizie the pthread worker structure.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If a signal is sent to a process, the POSIX spec says that ANY thread
could be picked ARBITRARILY to handle the signal. In our case this could
be one of the internal worker threads.
The problem here is that an unsuspecting user of the library might
suddenly have their signal handler run in parallel to their main thread
and run into weird concurrency issues, because they didn't expect that
to happen.
In fact, the libsquashfs API tries to be transparent about whether or
not it uses a thread pool internally and does everything other than
number crunching (e.g. I/O that may happen through user supplied
callbacks) in the same thread as the one that submitts the blocks.
Unfortunately, pthread doesn't have a way to set a signal mask for the
new thread and setting it inside the thread is racy (i.e. a signal might
be delivered before the worker thread sets the mask).
The only portable and non-racy way to do this, is to disable all signals
in the calling thread that sets up the data writer, create the threads
(which will inherit the mask) and then resetore the previous signal mask,
hoping for the best.
The downside to this is that signals may be lost in that short time.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of returning the ID through a pointer and an error code as
return status, return a single int that could be a compressor ID
(positive values) or an error code (negative values).
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
There were only a hand full of instances outside libsquashfs that used
the alloc code. In most cases, the thing allocated hat its size derived
from something already in memory anyway, so it is safe to assume its
size fits into a size_t.
At the same time, the opencoded Windows path conversion functions are
all unified into a single helper function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The check needs to include 1M, which is still a valid block size.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- Add an explicit "you're holding it wrong" error code.
- Consistently return error codes and not have some special places
where -1 is returned.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The liblzo2 library is licensed under GPLv2, so it is not possible to
distribute binaries of libsquashfs that link against liblzo2 under
LGPL.
This commit moves the LZO compressor implementation to libcommon,
where this isn't a problem, since the tools themselves are licensed
under GPLv3.
It removes the ability of libsquashfs to read or generate LZO compressed
SquashFS images, but the tools still can.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
In most cases, including unistd.h and fcntl.h was a left over anyway.
In the cases where it was not, move it to compat.h.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The -static-libgcc flag has to be passed through the compiler with
a "-Wc," prefix, because libtool tries to be clever about linker
flags. If added directly to LDFLAGS, libtool removes it.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
SquashFS cannot represent empty string file names in the directory
entry structure, so reject them and report an error.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit moves the generic unix implementation into a "unix"
subdirectory and adds a "win32" subdirectory with a winapi based
implementation.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
After the last modification, the directory index size counter
no longer counts the size, but the number of index entries. To
avoid future confusion, remove the thing entirely and compute
the size on the fly.
Furthermore, eliminate unaligned memory writes and fix the
darn counter once again.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Apparently mksquashfs writes an actual usage count (1 = 1 entry,
2 = 2 entries; i.e. NOT off by one).
Also, if it does happen to be garbage, guard against an overflow.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of using int or unsigned int for generic function flag
arguments, consistently use an unsigned, fixed size type.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
