summaryrefslogtreecommitdiff
path: root/lib/sqfs
AgeCommit message (Collapse)Author
2019-07-29Fix order of data block deduplicationDavid Oberhollenzer
Data blocks need to be deduplicated before attempting to write a fragment. In the current attempt if the data blocks are found to be duplicates but the fragment isn't, the flushed fragments are purged as well, possibly damaging other files. Also, when the deduplication happens, the HAS_FRAGMENT flag needs to be set, otherwise the deduplication code thinks that there is one more block than there actually is. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-29Cleanup: move deduplication code from data writer to fstreeDavid Oberhollenzer
Since it is actually completely independend of libsqfs and only works on file_info_t lists, it can be safely moved over to libfstree and the data writer becomes less cluttered as a result. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Fix duplicate file accountingDavid Oberhollenzer
A file is a complete duplicate if: - It has no blocks, only a single fragment and that is a duplicate - It has blocks but no fragment and the blocks are duplicate - It has blocks and a fragment and both are duplicate The previous version only counted the last one. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Fix used bytes accounting when deduplicating file blocksDavid Oberhollenzer
If an entire file is eliminated, we need to reset the "used_bytes" counter, otherwise, ALL the table positions are way off. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Fix free() of stack pointer in id_table_read error pathDavid Oberhollenzer
We didn't allocate the ID table, so we don't need to free() it when reading from disk fails. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Fix: return the correct value from data_reader_createDavid Oberhollenzer
Cut & paste misshap after mergining with fragment reader: If there are no fragments, data_reader_create should return the data reader, not 0! Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Add some nice statistics output to tar2sqfs and gensquashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Add general purpose flags field to file_info_tDavid Oberhollenzer
Simplifies some task if we can just add a flag that a file has a framgent or that it has already been detected as a duplicate. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Implement data block deduplicationDavid Oberhollenzer
The strategy is as follows: - At the beginning of every file, remember the current position - Once a file is done scan the list of existing files for the following: - Look for an existing file that has a block with the same size and checksum as the first non-sparse block of the current file - After that, every block in the current file has to match in size and checksum the ones in the file that we found, from that point onward - sparse blocks in either file are skipped - If we found a match, we update the current file to point to the first matching block and rewind the squashfs image to remove the newly written data This strategy should in theory be able to find an existing file where the on-disk data *contains* the on-disk data of the current file. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Implement fragment deduplication in data writerDavid Oberhollenzer
The strategy is simple: - The data writer function that write data/fragment blocks get access to the list files. - When writing a fragment, we look for an already written file that has a fragment with the same size and checksum. - If we find one, we throw away the fragment and reuse the existing one. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Unify common file start/end code from data writer in helper functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Compute per-block and per-fragment checksums in data wrtierDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Add fragment and block checksum fields to file_info_tDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Merge remaining code of fragment reader into data readerDavid Oberhollenzer
After the table read unification, there wasn't much left of the fragment reader and the remains could easily be moved over to the data reader. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Split data_reader_dump_file into smaller functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-25Fix potential resource leak in deserialize_treeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-25Fix checks of super block block sizeDavid Oberhollenzer
Make sure range is checked when reading a block and that the check is made correctly. Also make the block log check a little more strict. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-25Fix acciedental usage of left over local variable instead struct memberDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-25Add generic read_table function similar to write_tableDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-25Cleanup sqfs_write_tableDavid Oberhollenzer
This commit attempts to make the generic table writer more readable. A few changes are made, including heap allocation of the block list. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-25Rename table.c to write_table.c in accordance to function it containsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-25Fix fragment reader out of bounds read when loading tableDavid Oberhollenzer
This commit fixes a bug in the fragment table reader where the reader tries to read data into an out of bounds location due to an oversight in size calculation. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-25Replace reads in squashfs with positional readsDavid Oberhollenzer
In most cases, we know exactely where the data that we want to read is on disk, so instead of using read() on the squashfs (or lseek + read), the code can in many places be cleaned up to use the pread wrapper read_data_at instead. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-24cleanup: remove atime/ctime processing codeDavid Oberhollenzer
This commit removes all the code for parsing and processing atime/ctime and values and related test code. Caring about those is kind of pointless because squashfs can only store mtime in inodes. The only relevant place is when generating a struct stat from a squashfs inode or an fstree node. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-24Enable largefile supportMatt Turner
Requires that config.h be included before other headers, since the macro _FILE_OFFSET_BITS changes the definitions of things like 'struct stat'. I chose to simply include it at the top of every C file and at immediately after the double-inclusion guards of every header. Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-23Fix tree node scanningDavid Oberhollenzer
- Bail early on empty directories without touching the meta readers. - Aport the directory read loop if we can't even read a header anymore, no matter if there are bytes remaining. - Also add that same condition to the inner loop. The later two actually caused a numeric overflow on some particularly malformed squashfs images, going into a RAM filling infinite loop. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-22Add a way to optionally keep the original time stampsDavid Oberhollenzer
First of all, this commit adds a mod_time field to a tree node. When creating the tree node, the field is set from the struct stat. When scanning a directory, the time stamps from the input are used if set. Second, the libsqfs code that reads inodes is modified to store the mod_time from the inode in the fstree node and to write the tree node into a generated inode. Finally, tar2sqfs is modified to optionally keep the timestamps from the tar archive instead of setting defaults. gensquashfs is similarly modified to keep the input timestamps if specified. The result is as follows: - sqfs2tar will always carry the timestamps from the squashfs over to the tar ball. - tar2sqfs will set defaults, unless explicitly asked to preserve the mtime from the tar ball. - gensquashfs can optionally preserve the mtime from the input hierarchy it processes if only --pack-dir is specified. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-21Fix indexing into export tableDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-21Implement generating an inode table for NFS exportDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-21Add support for storing xattr values out-of-lineDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-21Cleanup xattr handlingDavid Oberhollenzer
- Store them in a struct instead of a hacky uint64_t with magic shifts - Split up key/value pair write function to write_key and write_value - Move the size accounting into those functions respectively Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-21cleanup: remove left over, unused assignmentDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-20Make raw fragment table accessible through fragment/data readersDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-16cleanup: move error handling into read_retryDavid Oberhollenzer
If read_retry fails to read the expected amount of data (EOF or otherwise), it is almost always an error. This commit renames read_retry to read_data and moves error handling into the function, making a lot of error handling code redundant. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-16cleanup: move error handling into write_retryDavid Oberhollenzer
If write_retry fails to write everything, it is *always* an error. This commit renames write_retry to write_data and moves error handling into the function, making a lot of error handling code redundant. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-16Fix directory index creationDavid Oberhollenzer
Digging around in kernel internals and mksquashfs reveals that it is actually a buffer offset into the raw directory buffer. The error hasn't been noted until now because of the bug fixed by a5428e0. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-15Add flags to data writer to micro manage behaviourDavid Oberhollenzer
The added flags allow controlling the following on a per file level: - forcing a file to be written uncompressed - forcing a file to not have a fragment, i.e. the last truncated block actually being written as a block - padding a file to be alligned to device block size The flags are not yet exposed to anything user controllable (such as command line flags). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-12Add generic support for reading files without fragmentsDavid Oberhollenzer
This commit extends the special case handling for sparse files to generically support reading files that don't have a fragment but instead have a trunkated final block. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-12Simplify writer code for files without a fragmentDavid Oberhollenzer
The data writer sparse block code can take advantage that it can add a block size instead of a fragment and doesn't have to initialize the framgent location. In return, the tree node to inode serialization code doesn't need a special case for sparse file anymore and can now also handle files that are forced to not have a fragment. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-10Fix dirindex writing for ext dir inodeDavid Oberhollenzer
This commit makes sure we write the index count to the inode before writing out the inode itself. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-10libsqfs: eleminate use of temporary fileDavid Oberhollenzer
Tell the directory writer to keep the directory blocks in memory, then write them out once everything is done and the inodes are all written out. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-10Add a way to keep meta data blocks in memoryDavid Oberhollenzer
Instead of writing meta data blocks directly to disk, the writer can now alternatively keep the blocks in memory until explicitly told to write to disk. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-09Sanity check id table size read from super blockDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-07Actually encode/decode directory inode difference as signedDavid Oberhollenzer
The directory listing stores a signed difference of the inode number. Actually treating it as signed saves emitting extra headers if hard links or file deduplication are finally implemented. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-07read_inode: determine mode bits from inode typeDavid Oberhollenzer
Instead of insisting that mode bits and inode type match up, determine ignore the mode bits and determine them from the inode type. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-07Cleanup: merge inode type selection in inode writerDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-06Cleanup: split off inode writer block list and dir index codeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-04Fix: simplify deduction logic for squashfs inode typeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-04Fix: check block_log range before deriving block size from itDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-04Fix: actually check return value when writing xattrsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-11 06:41:56 +0000