aboutsummaryrefslogtreecommitdiff
path: root/lib/sqfs
AgeCommit message (Collapse)Author
2020-06-11Add flags to functions that might logically be expanded in the futureDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-09Cleanup: mark sqfs_xattr_writer_flush writer argument as constDavid Oberhollenzer
It does not make any changes to the writer itself, so mark it as const. This also requires some similar changes to the string table. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-09Cleanup: remove refcount adjusting in sqfs_xattr_writer_endDavid Oberhollenzer
After finding a match, reducing the reference count of the matched elements and increasing them afterwards leaves the reference count identical, because they refere to the same entries. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-09Cleanup: split libsquashfs xattr writer codeDavid Oberhollenzer
This commit moves the libsquashfs xattr related code into a sub directory and splits the xattr writer code up into several files. No actual code is changed. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-07Fix uninitialized error code in block processor error pathDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-07Move the fragment deduplication hash table back into the block processorDavid Oberhollenzer
Fragment deduplication really doesn't belong into the public API of the fragment table. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-07block processor: add an internal common cleanup functionDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04Cleanup: Pull compression level parameter out into compressor configDavid Oberhollenzer
Every compressor (except LC4) has a compression level parameter. This commit pulls the compression level field out into the generic configuration structure and applies some code clean ups as a result from this. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04Strictly enfore min/max dictionary size in XZ & LZMA compressorsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04lzma compressor: support micro management optionsDavid Oberhollenzer
The LZMA compressor (through the xz-utils library) supports basically the same options for micro management as the XZ compressor. This commit enables support for those options in the compressor, the option parser and adds an option field to the configuration structure. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04lzma compressor: add support for the "extreme" flagDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-03Cleanup: Add defines for minimum and maximum block sizeDavid Oberhollenzer
This commit adds propper defines in the super block header and removes some of the hard coded constants. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Block processor: cleanup macros, merge windows & pthread initializationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: merge finish & sync functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: allow operation without a fragment tableDavid Oberhollenzer
This commit modifies the block processor to support operating without a fragment table. If that is the case, fragment deduplication is essentially disabled and fragment blocks aren't indexed anymore. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: Add a raw block submission functionDavid Oberhollenzer
This function allows submission of raw blocks to the block processor, completely bypassing the file API. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: add flags to manage hashing & sparse block detectionDavid Oberhollenzer
This commit adds 2 new user settable flags to the block processor: - A flag to ignore sparse blocks and treat them like normal data blocks. - A flag to disable checksum computation altogether. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Support associating a user pointer with data blocksDavid Oberhollenzer
This commit modifies the block processor to support associating a user data pointer with data blocks that it forwards to the block writer, which is modified to accept an optional user data pointer. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: turn internal functions into interface entry pointsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Make the block processor inode management optionalDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Turn the sqfs_block_writer_t into an interfaceDavid Oberhollenzer
This way, everything that could be done through the hooks (and more) can be done by simply providign a custom implementation. The result is a lot clener that the previous hook based version. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29cleanup: libsqfs: eliminate block writer statisticsDavid Oberhollenzer
- the "bytes submitted" can be moved over to the block processor - the number of blocks submitted are already there (implcitily, by adding the data block count to the fragment block count) - actual data bytes written can be computed from the super block - the remaining block count can be changed to simple counter that can be obtained through a function. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29cleanup: libsqfs: remove hooks from sqfs_block_writer_tDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-24Minor fixes/cleanups in the block processorDavid Oberhollenzer
- Move the inode modifications out of do_block. The inode may be reallocated in parallel by the process_completed_block function, so it is not safe to store the fragment location in the do_block function which is used from the worker threads. - Move the accounting of fragment blocks to the process_completed_block function. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-24Cleanup: split the block processor common.c againDavid Oberhollenzer
This commit breaks the common code up again by moving the data submission code to a separate file, making both a little bit more readable. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-24block processor: promote fragments to fragment blocksDavid Oberhollenzer
Instead of [potentially] allocating a new fragment block, take an existing fragment and promote it to the fragmenet block. This saves as a potential block allocation and a memcpy of the initial data. Also it *definitely* removes block allocation from the backend path of the block processor. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23block processor: move the block consolidation to the worker threadDavid Oberhollenzer
Instead of merging fragments into the fragment block inside the process_completed_fragment function, store a linked list of fragments in the fragment block and do the actual merging (several memcpy calls totaling of up to 1M of data in worst case) in the worker thread instead of the locked, serial path. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23block processor: recycle blocks to reduce allocation pressureDavid Oberhollenzer
Instead of freeing/allocating blocks all the time in the locked, serial path, use a free list to "recycle" blocks. Once a block is no longer used, throw it onto the free list. If a new block is, needed try to get one from the free list before calling malloc. After a few iterations, the block processor should stop allocating new blocks and only re-use the ones it already has. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23block processor: don't zero initialize the block payload areaDavid Oberhollenzer
In the block processor, the payload area is only accessed up to the indicated size. Even the part that is accessed is initialized by copying data into the block before increasing the size, so there is no real point in zero-initializing hundres of kilobytes if not megabytes of payload area, especially since this is done in the locked, serial path of the block processor. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21Fix: zstd: actually set the compression level from the optionsDavid Oberhollenzer
In the zstd compressor, the compression level from the configuration structure wasn't used at all. Instead, the zstd compressor was told to use level 0 and compressor options with that parameter were written to disk. This commit makes sure the level parameter is propperly initialized. Reported-by: Sébastien Gross Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21Fix the semantics of the super block deduplicationDavid Oberhollenzer
Its purely informational, but make sure other programs don't print out scary messages that imply the data has been ineficiently. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-19Cleanup: move hash table header to include directoryDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-04Expose more fine grained control values & flags on the XZ compressorDavid Oberhollenzer
This patch allows external users to fiddle with the XZ compressors compression strength, alignment and other values. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-04Fix: propperly set the last block flag if fragments are disabledDavid Oberhollenzer
If a file consisting of multiple blocks is produced, the last block is short and the don't fragment flag is set, the last block flag has to be set on the block when we flush it, so the processing pipeline does it's job correctly. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-03Fix: use 0644 as default permissions when creating filesDavid Oberhollenzer
Until now, when packing or unpacking a SquashFS image, files where created with paranoid permissions (i.e. 0600). The rational behind this was that otherwise, the tools may inadvertently expose secrets, e.g. if a root user packs files that that aren't world readable, such as the /etc/shadows file, but the packed SquashFS image is, we have accidentally leaked this file to other users that can access the newly created SquashFS image. The same line of reasoning also applies when unpacking files. Unfortunately, this breaks a list of other, more common standard use cases (e.g. a build server where the an image is built by a deamon running as user X but then has to be accessed by another deamon running as Y). This commit changes to a more standard approach of using permissive file permissions by default and asking paranoid users to simply use a paranoid umask. For tar2sqfs & gensquashfs this simply means chaning the default permissions in the libsquashfs file implementation. For rdsquashfs on the other hand there is still the use case where the unpacked files get the permissions from the [secret] image, so setting a strict umask is not applicable and changing to permissive file mode leaks something. For this case a second code path needs to be added that derives the permissions from the ones in the image. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-04-22Import and use Mesa's hash tableMatt Turner
With `perf record`/`perf report` I saw that 30% of the time was spent in `sqfs_frag_table_find_tail_end` with tar2sqfs for a tarball containing the Gentoo ebuild repository (many thousands of small files). The reason was the bucketing hash table in frag_table.c: too many elements in too few buckets meant lots of walking over the linked lists. This patch replaces that hash table with the hash table implementation from Mesa. Its implementation is more complex (is is an open-addressing, linear-reprobing) hash table, but it is much better suited for the task. On my 4c/8t Skylake, the time to run tar2sqfs drops from 7.5s to less than 3s. CPU usage increases from ~207% to ~356%, presumably indicating an increase in available parallelism due to the removal of the hash table as a bottleneck. The `perf report` profile with this patch shows that the time spent in `sqfs_frag_table_find_tail_end` has dropped from ~30% to 0.01%. Output from ministat: x before + after N Min Max Median Avg Stddev x 20 7.476 7.685 7.5725 7.5615 0.051254268 + 20 2.79 2.901 2.846 2.84475 0.03543842 Difference at 95.0% confidence -4.71675 +/- 0.0282015 -62.3785% +/- 0.241477% (Student's t, pooled s = 0.0440618) I imported only the bits of the hash table implementation that were needed for frag_table.c. Among the changes I made after importing are - removed usage of ralloc, Mesa's recursive memory allocator - Replaced ralloc -> malloc ralloc_free -> free rzalloc_array -> calloc - Removed mem_ctx parameters - Added free()s to the appropriate places (valgrind confirms there are no leaks) - removed _mesa_-prefix from function names Fixes: #40 Signed-off-by: Matt Turner <mattst88@gmail.com>
2020-03-19Fix destruction of NULL pointer in xattr reader cleanupDavid Oberhollenzer
This fixes a copy and paste error in the cleanup path, destroying a previously destroyed object again instead of the one being tested for. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-19Fix pthread_join check for valid thread handlesDavid Oberhollenzer
On Linux, checking for > 0 worked because pthread_t is internally an integer type. On other platforms (*caugh* Mac OS X *caugh*), it is typedefed to an opaque pointer, causing a warning if used in an integer relational comparison. The intended use is to allow the generic cleanup function to be used in the error path of the block processor creation function, while preventing pthread_join being called on threads that haven't been created at all. Since they are calloc'ed to 0, testing for non-zero values should suffice in both cases. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-18Fix build of lz4 compressor with older versions of liblz4David Oberhollenzer
Older versions of liblz4 don't define LZ4HC_CLEVEL_MAX. This commit adds a definition if liblz4 doesn't provide one. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-18Cleanup: Move xxhash32 code to libutilDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-05Get rid of sqfs_compressor_existsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-05Change the signature of sqfs_compressor_create to return an error codeDavid Oberhollenzer
Make sure the function has a way of telling the caller *why* it failed. This way, the function can convey whether it had an internal error, an allocation failure, whether the arguments are totaly nonsensical, or simply that the compressor *or specific configuration* is not supported. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-05Cleanup: Remove the E_ prefix from all libsquashfs enumeratorsDavid Oberhollenzer
Avoid namespace polution. Make sure all exportet symbols are prefixed with either sqfs_ or SQFS_. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-04Fix block writer inheritance of sqfs_object_tDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-04Cleanup: match xattr reader API closer to id table APIDavid Oberhollenzer
Instead of creating everything in the "create" function, cleanup and create/initialize stuff in a "load" function. This allows the xattr reader to be reset/re-used and adds the benefit of not having to lug around references to the super block, compressor and file (altough the later two are hidden inside the meta reader). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-04Add a generic copying mechanism to sqfs_object_tDavid Oberhollenzer
This patch adds a deep-copy callback to sqfs_object_t and removes the copying mechanism from sqfs_compressor_t. This is also interesting for other types. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-01Add a "do not deduplicate" block flagDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-03-01Fix alloca in write_inode.c for windows buildDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-02-27Fix: strictly verify compressor settings in config initializationDavid Oberhollenzer
Make sure the function throws an error if a given compressor ID or flag is not known. This way, libsquahfs supports *exactly* and *only* what the on-disk format specifies. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-02-27Add a function to the compressor interface to get the configurationDavid Oberhollenzer
This allows getting the compressor configuration back after creating it, for various purposes. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>