| Age | Commit message (Collapse) | Author |
|---|
|
Return an error number as document instead of throwing -1.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of doing everything by manually.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
There are 3 types of extra payload:
- Directory index
- File block sizes
- Symlink target
This commit removes the type specific pointers and modifies the code
to use the payload area directly. To simplify the file block case and
mitigate alignment issues, the type of the extra field is changed to
sqfs_u32.
For symlink target, the extra field can simply be cast to a character
pointer (it had to be cast anyway for most uses). For block sizes,
probably the most common usecase, it can be used as is. For directory
indices, there is a helper function anyway.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
There were only a hand full of instances outside libsquashfs that used
the alloc code. In most cases, the thing allocated hat its size derived
from something already in memory anyway, so it is safe to assume its
size fits into a size_t.
At the same time, the opencoded Windows path conversion functions are
all unified into a single helper function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
ssize_t is only available on POSIX platforms and even there it is
only defined to hold at least -1 in the range of negative numbers.
This commit replaces ssize_t return types with sqfs_s32 and the
coresponding function arguments with sqfs_u32. Because the range
of positiv numbers for a signed 32 bit number is only half that of
the unsigned version, additional checks have to be added.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This is a fully automated search and replace, i.e. I ran this:
git grep -l uint8_t | xargs sed -i 's/uint8_t/sqfs_u8/g'
git grep -l uint16_t | xargs sed -i 's/uint16_t/sqfs_u16/g'
git grep -l uint32_t | xargs sed -i 's/uint32_t/sqfs_u32/g'
git grep -l uint64_t | xargs sed -i 's/uint64_t/sqfs_u64/g'
git grep -l int8_t | xargs sed -i 's/int8_t/sqfs_s8/g'
git grep -l int16_t | xargs sed -i 's/int16_t/sqfs_s16/g'
git grep -l int32_t | xargs sed -i 's/int32_t/sqfs_s32/g'
git grep -l int64_t | xargs sed -i 's/int64_t/sqfs_s64/g'
and than added the appropriate definitions to sqfs/predef.h
The whole point being better compatibillity with platforms that may
not have an stdint.h with the propper definitions.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Make sure that the block cache pointers are reset to NULL after
freeing them, the get_block function does not update them on failure.
Also, make sure all error paths in the get_block function actually
clean up the allocated memory.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The idea is to make libsquashfs.a independend of libfstree.a, so it becomes
a general purpose squashfs manipulation library. All the high level glue code
for libfstree.a and utilites that are overly specific with to tools are moved
to a seperate librarby.
This commit makes the first step by moving the stuff with dependencies on
libfstree to a seperate library.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
In all cases where metadata blocks are read, we can roughly (in some
cases even preciesly) say in what range those metadata blocks will be,
so it makes sense to throw an error if an attempt is made to wander
outside this range.
Furthermore, when reading from an uncompressed block, it is more reasonable
to check against the actual block bounds than to padd it with 0 bytes.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit exchanges some malloc(x + y * z) patterns that can be found
with a simple git grep and are obvious for the new wrappers.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Only padd it if the *extracted* size is less then block size. Doing it
with the compressed size results in garbled blocks. Especially because
most of them are less than block size when compressed.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- Split block reading code out from "dump_blocks" into precache_data_block,
similar to precache_fragment_block
- Merge the code paths for fragment/data block reading and uncompression
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Cut & paste misshap after mergining with fragment reader: If there are
no fragments, data_reader_create should return the data reader, not 0!
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Simplifies some task if we can just add a flag that a file has a framgent
or that it has already been detected as a duplicate.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
After the table read unification, there wasn't much left of the fragment
reader and the remains could easily be moved over to the data reader.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
In most cases, we know exactely where the data that we want to read is
on disk, so instead of using read() on the squashfs (or lseek + read),
the code can in many places be cleaned up to use the pread wrapper
read_data_at instead.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Requires that config.h be included before other headers, since the macro
_FILE_OFFSET_BITS changes the definitions of things like 'struct stat'.
I chose to simply include it at the top of every C file and at
immediately after the double-inclusion guards of every header.
Signed-off-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If read_retry fails to read the expected amount of data (EOF or otherwise),
it is almost always an error.
This commit renames read_retry to read_data and moves error handling
into the function, making a lot of error handling code redundant.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If write_retry fails to write everything, it is *always* an error.
This commit renames write_retry to write_data and moves error handling
into the function, making a lot of error handling code redundant.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit extends the special case handling for sparse files to
generically support reading files that don't have a fragment but
instead have a trunkated final block.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit adds support for packing sparse files into squashfs images
as follows:
- In the data writer: simply detect zero blocks and write a zero to the
block size field and don't emit any data. Record the number of bytes
saved this way. For fragments, set the fragment offset to invalid.
- In the inode writer: write out the number of bytes saved for sparse
files. If there should be a fragment but there is none, append a block
count of 0.
- In the data reader: if the block size is 0, read nothing from disk and
emit an empty block. Do the same if the fragment is missing.
- In the inode reader: restore the number of bytes saved for sparse files.
The sparse files can be packed and unpacked, but the unpacking will not
create sparse files for now.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
