| Age | Commit message (Collapse) | Author |
|---|
|
On the one hand, benchmarking and profiling determined xxhash32 to be
faster than the zlib implementation of crc32, on the other hand
profiling determined that crc32 computation contributed signifficantly
to the overall runtime.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Make every dynamically allocated, opaque data structure inherit from
a common sqfs_object_t structure with common entry points (e.g. destroy).
This removes tons of public API functions and replaces them with a
simple sqfs_destroy instead. If semantics of the (until now implicit)
object system need to be extended, it can be much more conveniantely
done this way.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The zstd compress function returns an error code if it cannot fit the
compressed data into the given destination buffer.
This commit adds a check for this error and reports that the
libsquashfs compressor implementation was unable to shrink the input
instead of claiming a fatal error happened.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of returning the ID through a pointer and an error code as
return status, return a single int that could be a compressor ID
(positive values) or an error code (negative values).
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
There were only a hand full of instances outside libsquashfs that used
the alloc code. In most cases, the thing allocated hat its size derived
from something already in memory anyway, so it is safe to assume its
size fits into a size_t.
At the same time, the opencoded Windows path conversion functions are
all unified into a single helper function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- Add an explicit "you're holding it wrong" error code.
- Consistently return error codes and not have some special places
where -1 is returned.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The liblzo2 library is licensed under GPLv2, so it is not possible to
distribute binaries of libsquashfs that link against liblzo2 under
LGPL.
This commit moves the LZO compressor implementation to libcommon,
where this isn't a problem, since the tools themselves are licensed
under GPLv3.
It removes the ability of libsquashfs to read or generate LZO compressed
SquashFS images, but the tools still can.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- Padd the compressor config union
- 128 bytes aught to be enough for everyone, i.e. future compressors.
- Insist that the padding space is initialized to 0. If a field gets
added to an existing compressor, it can test for 0 as a sentinel
value.
- Add a size field to the hook structure, aka "the Microsoft way".
- The explanation is in the comment.
- Don't make the Microsoft mistake of checking for >=, insist on *exact*
size match. Future users will need a fallback if their hooks are
rejected. But at least they will be rejected instead of silently not
being used.
- Add an unsupported flag check to the dir tree reader.
- Add a basic abi unit test that, for now, checks the size of the compressor
config struct fields.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Starting out with 0, makes the loop condition evaluate to false and
none of the filters are tested.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
First extend the uint8_t to size_t, then do the arithmetic, otherwise
there is an addtional implicit conversion to int, possibly resulting
in unwanted sign extension.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
ssize_t is only available on POSIX platforms and even there it is
only defined to hold at least -1 in the range of negative numbers.
This commit replaces ssize_t return types with sqfs_s32 and the
coresponding function arguments with sqfs_u32. Because the range
of positiv numbers for a signed 32 bit number is only half that of
the unsigned version, additional checks have to be added.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This is a fully automated search and replace, i.e. I ran this:
git grep -l uint8_t | xargs sed -i 's/uint8_t/sqfs_u8/g'
git grep -l uint16_t | xargs sed -i 's/uint16_t/sqfs_u16/g'
git grep -l uint32_t | xargs sed -i 's/uint32_t/sqfs_u32/g'
git grep -l uint64_t | xargs sed -i 's/uint64_t/sqfs_u64/g'
git grep -l int8_t | xargs sed -i 's/int8_t/sqfs_s8/g'
git grep -l int16_t | xargs sed -i 's/int16_t/sqfs_s16/g'
git grep -l int32_t | xargs sed -i 's/int32_t/sqfs_s32/g'
git grep -l int64_t | xargs sed -i 's/int64_t/sqfs_s64/g'
and than added the appropriate definitions to sqfs/predef.h
The whole point being better compatibillity with platforms that may
not have an stdint.h with the propper definitions.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This this commit, the code that is compiled and linked to produce
libsquashfs.so (and *only* libsquashfs.so) is released under the
terms and conditions of the GNU Lesser General Public license,
allowing 3rd party programs to dynamically link against it and still
being able to release their programs under a license of their choosing.
The libutil library is also relicensed, because it is statically linked
into libsquashfs.so. This does not affect the command line programs that
remain under the GPLv3.
At the current time, the two libraries do not contain any 3rd party
contributions and thus do not require anybodys consent other than mine
to change the licensing terms (unlike e.g. libfstree.a).
The libfstree.a and libsqfshelper.a utility libraries will also remain
under the GPLv3 license.
Going forward, some parts of libsqfshelper.a will be moved to
libsquashfs.so. The parts absorbed by libsquashfs.so will then also have
their licensing conditions changed *at that time*.
For the public headers, this commit adds the full boiler-plate comment
about the license, for the source files and internal headers, only the
SPDX identifier is changed.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This should make it easier to use libsquashfs with custom setups that
embedd a squashfs image inside something else. Also, it should make
it easier to port to non unix-like platforms.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit adds a "predef.h" header to libsquashfs that exposes two
macros, SQFS_API and SQFS_INTERNAL that are used to explicilty set
the visibiliy of stuff that ends up in libsquashfs to default or
hidden.
For compatibillity with Windows which may at some point eventually be
considered, the SQFS_API define is set to dllexport IF the cpp symbol
SQFS_BUILDING_DLL is defined and set to import otherwise.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add sqfs_* prefix to compressor, move implementation prefix up front.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
It only has one user and is quite specialized actually.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit moves stuff like printing help text, command line option
processing and enumerating available processors on stdout out of
the generic compressor code.
The option string is replaced with a structure that directly exposese
the tweakable parameters for all compressors. A function for parsing
the command line arguments into this structure is added in sqfshelper.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
