| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
There is no need to keep a copy of the state data internally. If the
external user wants to reset/rewind, they can simply keep a copy of
the old state, now that it is completely transparent.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of holding the state internally, move it outside and let the
user pass it in. This allows processing multiple directories and going
back and forth between them, while also simplifying the dir reader
internals.
The sqfs_dir_reader_get_inode function can also be made more generic
to accept a reference instead of being fully state dependent.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Those functions are only used in the example code, we remove them for
now to make restructuring easier and fix the examples later.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The only user in the code base is sqfs_dir_reader_find_by_path.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Modify gensquashfs to pack data using an istream wrapper, similar
to tar2sqfs. To implement the no-tail-pack option, we need the file
size, so we simply open a raw handle first, and query it (using
libsquashfs API) and then create the stream wrapper. For the output
side, we create a block-processor ostream wrapper and splice it.
Since gensquashfs is the only, remaining user of the pack-a-file
functon, we can then remove it from libcommon.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Always set the reference count to 1 after creating a copy
of an object.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The new behavior is enabled by default (except on Windows) and needs
to be turned off explicitly.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The reason this is implemented separately, instead of roling it into
the recursive iterator, is so that we can do additional filtering
in between. For instance, we can rewrite the path and the hard link
path will match up, or if we remove nodes from the hierarchy, we
won't end up with a hard link pointing outside.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Rename the open function to sqfs_file_open, use an argument for the
return pointer and pass back and error number on failure. Also add
an inermediate function to open an sqfs_file_t using a handle, similar
to the stream API. The get_file_size function is moved to the native
wrappers and some of the implementation is cleaned up a little.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This might be needed externally for things like hard link detection.
For the unix implementation, store the actual inode number here.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
To the sqfs_data_reader_t is added, an sqfs_istream_t implementation
that internally reads through the data reader. The uses of the
data_reader_dump function are removed and the function is subsequently
removed from libcommon.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The recursive part and the filter part are split up, the recursive
iterator wrapper is moved into libsquashfs and the libio iterator
is modified to use that internally instead of implementig the
recursion step.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Using --exclude or -E it is now possible to exclude
files from the input tar stream.
The options can be used multiple times.
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Exact operation performed:
git ls-files -z | \
xargs -0 sed -i -e 's/dir_entry_t/sqfs_dir_entry_t/g
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Exact operation performed:
git ls-files -z | \
xargs -0 sed -i -e 's/sqfs_dir_entry_t/sqfs_dir_node_t/g'
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
There are several ad-hoc int/uint parsers scattered around the code,
add a single helper function for that task and replace the multiple
instances. A simple white-box test case is added for the utility
function.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Start with a common prefix "sqfs_native_file_*"
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
It is mainly a very thin wrapper on top of the block processor so far.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
By adding additional close/duplicate primitives, the remaining, mostly
identical istream/ostream/file code is mostly identical between Windows
and Unix and be merged, mostly without stitches.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
On Unix like OSes, this saves/restores errno, on Windows both errno
and GetLastError state are saved/restored.
This should make it simpler to preserve that across function calls.
Additionally, while tracking down uses of GetLastError, some places
where the error code was printed out directly where replaced with
instances of w32_perror.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- The ostream creation functions already have flag arguments,
but make them an sqfs_u32 instead of int.
- Add flag arguments to the istream functions, sanitzie and forward
them when opening the handle.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Report an error number from the implementations, change the users to
forward that error number (which also means libtar write header/link
now returns an error code) and all subsequent binaries to use
sqfs_perror() instead of relying on the function to print an error
internally.
Also, make sure to preserve errno/GetLastError() in the implementations
and print out a stringified error in sqfs_perror() if the error code
indicates an I/O error.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Having a function to interpret the flags and open a native file handle
simplifies the istream/ostream/file code which shares that decoding
part, particularly on windows where the character set needs to be
transformed.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Similar to the sqfs_istream_t & sqfs_ostream_t interfaces.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
For now, only the interfaces and helper functions are moved, the
concrete implementations remain in libio.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
istream_t becomes sqfs_istream_t and ostream_t becomes sqfs_ostream_t
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of "open sparse", make that the default and turn it into
a "no sparse" flag.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead of a separate append-sparse function, simply accept NULL
as an input for append. For both Unix and Win32, a fallback needs
to be implemented. For XFRM, we can just memset the input buffer
to zero, same for the libsquashfs data writer.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
For the backends, this simplifies the code as both paths (open file
and open stdio) use the same basic code. Even when merging them only
in the backend, it would be done in a similar way. Making the
functions public allows other uses as well.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Since the user has to call istream_get_buffered_data afterwards anyway,
we can do the precache lazily.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This properly maps to all of our use cases and makes istream_precache
obsolete.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Instead, go through helper functions, which in a next step can be
moved inside the implementation.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
