summaryrefslogtreecommitdiff
path: root/include
AgeCommit message (Collapse)Author
2020-01-20Add a flag field to the id table create functionDavid Oberhollenzer
Just to be safe in case there needs to be an extension in the future. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-19Cleanup: remove the payload pointers from sqfs_inode_generic_tDavid Oberhollenzer
There are 3 types of extra payload: - Directory index - File block sizes - Symlink target This commit removes the type specific pointers and modifies the code to use the payload area directly. To simplify the file block case and mitigate alignment issues, the type of the extra field is changed to sqfs_u32. For symlink target, the extra field can simply be cast to a character pointer (it had to be cast anyway for most uses). For block sizes, probably the most common usecase, it can be used as is. For directory indices, there is a helper function anyway. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-19Update explanation on directory index accountingDavid Oberhollenzer
Tests with the Debian image (which is generated with squashfs-tools, so should be interpreted as ground truth) have showed that the count is not stored off-by-one. The code was already doing the right thing, but the documentation was wrong. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-19Add a helper function to unpack directory index entriesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-12Add a start anchor parameter to sqfs_dir_reader_find_by_pathDavid Oberhollenzer
It optionally allows code that does tree traversal to start at an inode that it obtained previously and makes it easier to keep state externally. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-12Add an inode deep copy helper function to libsquashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-06Cleanup: use parse_size function to parse compressor optionsDavid Oberhollenzer
The XZ option parser had a similar function to parse_size. This commit removes the other implementation and extends parse_size with the one missing feature, i.e. allowing a '%' suffix for a relative value. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-02Support parsing [device] block size argument with SI suffixDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-31Include sys/sysmacros.h on any GNU libc platformPino Toscano
sys/sysmacros.h is an implementation of GNU libc, so include it unconditionally when that libc is used. Signed-off-by: Pino Toscano <toscano.pino@tiscali.it>
2019-12-23Add libtar.a function to create hardlink recordsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-23Add simple sqfs_tree_node_t hardlink detection to libcommonDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-23Bring back the flat list of inodes in libfstreeDavid Oberhollenzer
It makes further processing simpler and doesn't leak the abstraction into upper layers. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-22Add hard link support to gensquashfs and tar2sqfsDavid Oberhollenzer
In libtar, set a special flag if the header is actually a hard link. In tar2sqfs, create a hard link node and skip the rest for hard links. Also refues to set the root attributes from a hard link, it may refere to a node that we have missed earlier, there is nothing else that we can do here. In fstree_from_file, add a "link" command for adding hard links. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-22Add basic support for handling and serializing hard linksDavid Oberhollenzer
In libfstree, add a function to add a hard link to the fstree. The hard links stores the target in the data.target field, canonicalizes the target and sets a sentinel mode. A second function is used to resolve link, i.e. replacing it with a direct pointer, setting another sentinel mode and increasing the targets link count. The post process function tries to resolve unresolved hard links and only allocates inode numbers for nodes that aren't hard links. If the target node of a hard link does not have an inode number yet, the two need to be swapped, since this is also the order in which they are serialized. The serialization function in libcommon simply has to skip hard link nodes and when writing directory entries, use the inode num/ref of the target node. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-19Split the libfstree add_by_path tree traversal function outDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-19Fix spelling mistakes found by lintianBenjamin Drung
Signed-off-by: Benjamin Drung <benjamin.drung@cloud.ionos.com>
2019-12-18Add an explicit link count to the fstree nodesDavid Oberhollenzer
Gets initialized to 2 for directories, 1 for all other types. The count of the parent node is automatically incremented. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-18Rename fstree "slink_target" to "target"David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-18Move is_filename_sane to libfstree, add test casesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-18Cleanup: internalize some fstree functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-18Cleanup: remove the unused "block_size" from the fstreeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-18Cleanup: merge the fstree post processing functionsDavid Oberhollenzer
Instead of having 3 different functions for sorting the tree, numbering the nodes and generating a file list, that all have to be used in the right order, this commit merges them into a single "fstree_post_process" function. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-16Remove fstree inode tableDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-16Use the sqfs_dir_writer_t to create the NFS export tableDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-16Add ability to sqfs_dir_writer to create an export tableDavid Oberhollenzer
If the dir writer is used to create the directory table, it neccessarily sees every single inode number and coresponding location for all inodes that are referenced by the filesystem tree. This means it can easily collect that information internally to create an export table later on. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-13Better support for reading/writing non-ASCII xattr values from/to tarDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-09Only check for OS specific bad filenames when unpackingDavid Oberhollenzer
When converting a SquashFS image to a tarball, it makes no sense to refuse conversion if the filename is considered evil by the OS. This patch adds an option to is_filename_sane to check if the OS has a problem with the given file name. sqfs2tar sets it to false and converts everything while rdsquashfs sets it to true when unpacking. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-28Cleanup: Return combined return value from compressor id by nameDavid Oberhollenzer
Instead of returning the ID through a pointer and an error code as return status, return a single int that could be a compressor ID (positive values) or an error code (negative values). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-25Cleanup: remove what is left of libutilDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-25Cleanup: move overflow safe alloc code into libsquashfsDavid Oberhollenzer
There were only a hand full of instances outside libsquashfs that used the alloc code. In most cases, the thing allocated hat its size derived from something already in memory anyway, so it is safe to assume its size fits into a size_t. At the same time, the opencoded Windows path conversion functions are all unified into a single helper function. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-24Cleanup: completely move str_table into libsquashfs internalsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-24Cleanup: remove unused str_table functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-24Cleanup: move canonicalize_name back to libfstree.aDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-24Cleanup libsquashfs invalid argument error codesDavid Oberhollenzer
- Add an explicit "you're holding it wrong" error code. - Consistently return error codes and not have some special places where -1 is returned. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-24Cleanup: remove the entirely redundant sqfs_has_xattr functionDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-24Fix: Move LZO compressor from libsquashfs to libcommonDavid Oberhollenzer
The liblzo2 library is licensed under GPLv2, so it is not possible to distribute binaries of libsquashfs that link against liblzo2 under LGPL. This commit moves the LZO compressor implementation to libcommon, where this isn't a problem, since the tools themselves are licensed under GPLv3. It removes the ability of libsquashfs to read or generate LZO compressed SquashFS images, but the tools still can. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-23Fix various data type problemsDavid Oberhollenzer
- Make sure the mockup constant for AT_FDCWD is actualy an int - Don't use %lld printf format specified, mscrt doesn't have that - On 64 bit windows, use %I64u format specified for size_t - Seperate the overflow macro stuff from the form specifier stuff - Move the whole thing to compat.h and clean it up a little so it becomes readable. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-23Add windows implementation for chdir in libcompatDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-23Move some unix header inclusions to compat.hDavid Oberhollenzer
In most cases, including unistd.h and fcntl.h was a left over anyway. In the cases where it was not, move it to compat.h. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-22Add fchownat/fchmodat mockups to libcompat for WindowsDavid Oberhollenzer
Not pretty, but definitely prettier than #ifdef hell. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-22Cleanup: move all the compatibillity fluff to a dedicated "libcompat"David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-22Ensure that tar2sqfs & sqfs2tar set stdin/out to binary modeDavid Oberhollenzer
As usual, Windows has things different and is the platform where the problem was actually discovered. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-18Remove directory stack codeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-18Add container_of implementation to utilitiesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-15Add missing "sys/sysmacros.h" header for back in for LinuxDavid Oberhollenzer
On BSD based systems, major(3), minor(3) and makedev(3) are defined in "sys/types.h", but on GNU/Linux systems they are in "sys/sysmacros.h", which is not available on the BSD systems. This patch fixes up compat.h to include "sys/sysmacros.h" on Linux based systems. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-15Fix build on BSD systemsAlyssa Ross
I tested FreeBSD, DragonflyBSD, NetBSD and OpenBSD and the endian macros weren't necessary (and in fact caused errors) on all of them. Because OpenBSD ships with an ancient GCC that doesn't support the checked addition/multiplication builtins, the build there would fail unless built with CC=cc or CC=clang. I changed configure.ac to prefer cc over gcc, so that the distribution's compiler preference is respected. (The default is [gcc cc]). I had to move AC_PROG_CC above LT_INIT because otherwise LT_INIT would run AC_PROG_CC first, and we wouldn't have a chance to use non-default parameters.
2019-11-06Cleanup: remove BSD style __prognameDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-06Cleanup: remove unused stdout sqfs_file_t wrapperDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-06Remove raw file descriptors from tar read pathDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-06Remove raw file descriptors from unpack write pathsDavid Oberhollenzer
Instead, use stdio FILE pointers. On POSIX systems, use fileno to get the file descriptor and hopefully create sparase files. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 18:26:29 +0000