aboutsummaryrefslogtreecommitdiff
path: root/include/sqfs
AgeCommit message (Collapse)Author
2020-02-12Cleanup: Move sqfs_block_t to block processor internalsDavid Oberhollenzer
It was basically built around the block processor and exposed way too many internals. Removing it from other places was mostly trivial. This commit completely removes it from the public API and even most of the libsquashfs internals. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-02-12Remove usage of sqfs_block_t from block readerDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-02-12Clenaup: remove useage of sqfs_block_t from block writerDavid Oberhollenzer
The sqfs_block_t structure has been written for the block processor and exposes way too many internals. This commit removes its usage from the block writer, cutting it down to the bare essentials, so the structure can be removed from the public API later on. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-02-11Document the block writer API.David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-02-10Cleanup: remove block hooks entirely from block processorDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-02-10Cleanup: remove the fragment store/discard and block discard hooksDavid Oberhollenzer
There is no obvious non-footgun use for those other than tallying statistics, which is now done by the data structures themselves. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-02-10Add run time statistics to the block writer and processorDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-02-09Move block writer and fragment table management out of block processorDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-31Split the block writing/deduplication away from the block processorDavid Oberhollenzer
This commit moves the entire block writing and deduplication of data blocks over to a different data type named "block writer". For simplicity, the interfaces of the block processor are left as is and are turned into warppers. Likewise, most of the code in the block writer is just verbatim from the block processor, to be cleaned up in subsequent commits. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-29Rename sqfs_data_writer_t back to sqfs_block_processor_tDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-26Cleanup: Move fragment deduplication code over to fragment tableDavid Oberhollenzer
This removes further clutter from the data writer. Any future efforts on making fragment by hash lookup faster can focus on that area only and don't clutter the block processor. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-24Add a fragment table primitive to libsquashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-20Add a flag field to the id table create functionDavid Oberhollenzer
Just to be safe in case there needs to be an extension in the future. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-19Cleanup: remove the payload pointers from sqfs_inode_generic_tDavid Oberhollenzer
There are 3 types of extra payload: - Directory index - File block sizes - Symlink target This commit removes the type specific pointers and modifies the code to use the payload area directly. To simplify the file block case and mitigate alignment issues, the type of the extra field is changed to sqfs_u32. For symlink target, the extra field can simply be cast to a character pointer (it had to be cast anyway for most uses). For block sizes, probably the most common usecase, it can be used as is. For directory indices, there is a helper function anyway. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-19Update explanation on directory index accountingDavid Oberhollenzer
Tests with the Debian image (which is generated with squashfs-tools, so should be interpreted as ground truth) have showed that the count is not stored off-by-one. The code was already doing the right thing, but the documentation was wrong. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-19Add a helper function to unpack directory index entriesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-12Add a start anchor parameter to sqfs_dir_reader_find_by_pathDavid Oberhollenzer
It optionally allows code that does tree traversal to start at an inode that it obtained previously and makes it easier to keep state externally. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-01-12Add an inode deep copy helper function to libsquashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-19Fix spelling mistakes found by lintianBenjamin Drung
Signed-off-by: Benjamin Drung <benjamin.drung@cloud.ionos.com>
2019-12-16Add ability to sqfs_dir_writer to create an export tableDavid Oberhollenzer
If the dir writer is used to create the directory table, it neccessarily sees every single inode number and coresponding location for all inodes that are referenced by the filesystem tree. This means it can easily collect that information internally to create an export table later on. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-28Cleanup: Return combined return value from compressor id by nameDavid Oberhollenzer
Instead of returning the ID through a pointer and an error code as return status, return a single int that could be a compressor ID (positive values) or an error code (negative values). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-24Cleanup libsquashfs invalid argument error codesDavid Oberhollenzer
- Add an explicit "you're holding it wrong" error code. - Consistently return error codes and not have some special places where -1 is returned. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-24Cleanup: remove the entirely redundant sqfs_has_xattr functionDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-07Cleanup: consistent, fixed size data types for generic flag fieldsDavid Oberhollenzer
Instead of using int or unsigned int for generic function flag arguments, consistently use an unsigned, fixed size type. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-07Fix spelling of "align"David Oberhollenzer
Before the misspelled version has a chance to become stable API. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-07Improve ABI backward & forward compatibillityDavid Oberhollenzer
- Padd the compressor config union - 128 bytes aught to be enough for everyone, i.e. future compressors. - Insist that the padding space is initialized to 0. If a field gets added to an existing compressor, it can test for 0 as a sentinel value. - Add a size field to the hook structure, aka "the Microsoft way". - The explanation is in the comment. - Don't make the Microsoft mistake of checking for >=, insist on *exact* size match. Future users will need a fallback if their hooks are rejected. But at least they will be rejected instead of silently not being used. - Add an unsupported flag check to the dir tree reader. - Add a basic abi unit test that, for now, checks the size of the compressor config struct fields. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-03Add a counter-part to sqfs_inode_get_xattr_indexDavid Oberhollenzer
Combines all the type depenend attribute setting and inode type promotion into a single function. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-03Store directory index in generic inode structureDavid Oberhollenzer
This commit modifies the dir writer to store the directory index directly in the payload area of the inode it creates. The size of the index in bytes is stored in a seperate field. Storing the index is moved to the write inode function. The read inode function is in turn also modified to read the directory index from disk and actually store it in the inode structure in memory for later use. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-30Add flag field to directory writer begin for future expansionDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-29Cleanup: rename "compress.h" to "compressor.h"David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-29Bring back the don't fragment flagDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-29Make the data writer padding hookableDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-28Add header with declarations for the sqfs_xattr_writer_tDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-28Move declarations for sqfs_xattr_reader_t to a seperate headerDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Add a header for platform compatibillity fluffDavid Oberhollenzer
- We don't have "endian.h" everywhere. On some BSDs its in sys and on some BSDs the macros have different names. - We definitely don't have sysmacros.h on non-Unix-like systems. - Likewise for sys/types.h, sys/stat.h and their contents. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Replace usage of mode_t in libsquashfs with sqfs_u16David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Add enum with inode permissions for compatibility with non-POSIX systemsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Remove use of ssize_t from library APIDavid Oberhollenzer
ssize_t is only available on POSIX platforms and even there it is only defined to hold at least -1 in the range of negative numbers. This commit replaces ssize_t return types with sqfs_s32 and the coresponding function arguments with sqfs_u32. Because the range of positiv numbers for a signed 32 bit number is only half that of the unsigned version, additional checks have to be added. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Cleanup: replace fixed with data types with typedefsDavid Oberhollenzer
This is a fully automated search and replace, i.e. I ran this: git grep -l uint8_t | xargs sed -i 's/uint8_t/sqfs_u8/g' git grep -l uint16_t | xargs sed -i 's/uint16_t/sqfs_u16/g' git grep -l uint32_t | xargs sed -i 's/uint32_t/sqfs_u32/g' git grep -l uint64_t | xargs sed -i 's/uint64_t/sqfs_u64/g' git grep -l int8_t | xargs sed -i 's/int8_t/sqfs_s8/g' git grep -l int16_t | xargs sed -i 's/int16_t/sqfs_s16/g' git grep -l int32_t | xargs sed -i 's/int32_t/sqfs_s32/g' git grep -l int64_t | xargs sed -i 's/int64_t/sqfs_s64/g' and than added the appropriate definitions to sqfs/predef.h The whole point being better compatibillity with platforms that may not have an stdint.h with the propper definitions. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Fix typo in error enumeratorDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Add missing comments on error enumeratorDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Cleanup: merge data.h into block.hDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-26Update documentation on sqfs_data_writer_tDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-26Remove the create I/O block from sqfs_file_t functionDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-26Replace the data writer enqueue with "append buffer to current file"David Oberhollenzer
This commit turns the file interface into an actual, generic file interface and does away with having to move around blocks outside the data writer. Instead the data writer takes over full control and responsibility of dividing the input data up into blocks propperly. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-26Add file API stub to sqfs data writerDavid Oberhollenzer
Basically move the state tracking from the old data writer over to the new one. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-25Remove condensed sparse file handling from libsquashfsDavid Oberhollenzer
This only exists for tar2sqfs. Move the sparse file map to libtar and add the ability to do this into the stind sqfs_file_t abstraction, so it acts like a normal file but internally stitches the data together from the sparse implementation. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-25Cleanup: move the stdin sqfs_file_t wrapper out of libsquashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-25Add the ability to hook into the data writer block writingDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-25Move sqfs_block_t to its own headerDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>