summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2019-11-19Remove no-tools restriction for windowsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-11-15Fix build on BSD systemsAlyssa Ross
I tested FreeBSD, DragonflyBSD, NetBSD and OpenBSD and the endian macros weren't necessary (and in fact caused errors) on all of them. Because OpenBSD ships with an ancient GCC that doesn't support the checked addition/multiplication builtins, the build there would fail unless built with CC=cc or CC=clang. I changed configure.ac to prefer cc over gcc, so that the distribution's compiler preference is respected. (The default is [gcc cc]). I had to move AC_PROG_CC above LT_INIT because otherwise LT_INIT would run AC_PROG_CC first, and we wouldn't have a chance to use non-default parameters.
2019-10-28Add fallback implementation for getsubopt()David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-28Add a minimal fallback implementation for getline()David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-28Add libutil implementation for strndup in case it isn't availableDavid Oberhollenzer
"Some" "non-POSIX systems" don't have that. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-11Add the required libtool magic to build a Windows DLLDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-11Add configure check for WindowsDavid Oberhollenzer
Set an automake variable and force --without-tools by default. Also, don't even try to check for pthread if we are compiling for Windows. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-08Add a configure option to disable building the toolsDavid Oberhollenzer
If this option is used, only libsquashfs is built and installed, and the test cases for the other helper libraries are deactivated. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-07Bump version number for the next releaseDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-10-05Set sane defaults for backlog and job countDavid Oberhollenzer
Instead of defaulting to -j 1 and -Q 10 times the job count if no option is provided, let tar2sqfs and gensquashfs use all available CPUs and about roughly half the available RAM, if this information can be gathered. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Add a pkg-config file for libsquashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-27Fix typo in LZO_LIBS variableDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-09-09Add Doxygen based reference manual to build systemDavid Oberhollenzer
This commit modifies the build system to optionally generate a reference manual for libsquashfs using Doxygen (if Doxygen is available and the manual is explicitly built). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-31Turn libsquashfs.a into a shared libraryDavid Oberhollenzer
This of course entails turning the entire project over to libtool magic. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-27Bump patch level version numberv0.6.1David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-23Add primitives for unsigned addition/multiplication with overflowDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-21Bump version number for next releaseDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-19Make using pthread optionalDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Replace update_crc32 helper function with crc32 from zlibDavid Oberhollenzer
It is optimized to the maximum and if we already use zlib anyway, why not use zlib crc32? This also makes zlib a hard dependency which also means the whole "do we have a compressor" sanity check in the build system can be removed. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Add pthread based, parallel block processor implementationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Add flag to rdsquashfs to optionally set xattrs on unpacked filesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-28Bump version numberv0.5David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-24Fix processing of tar mtime on 32 bit systemsDavid Oberhollenzer
struct stat uses time_t to store time values. On some 32 bit systems, this may be a 32 bit integer. This patch adds a broken-out 64 bit time value to tar_header_decoded_t and makes sure to clamp the value to +/- (2^32 - 1) if required when writing it back to a struct stat. Reported-by: Matt Turner <mattst88@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-24Enable largefile supportMatt Turner
Requires that config.h be included before other headers, since the macro _FILE_OFFSET_BITS changes the definitions of things like 'struct stat'. I chose to simply include it at the top of every C file and at immediately after the double-inclusion guards of every header. Signed-off-by: Matt Turner <mattst88@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-17Bump patch level release versionv0.4.2David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-07Bump patch level release versionv0.4.1David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-04Bump versionDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-30Bump versionv0.3David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-13Bump versionv0.2David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-11Cleanup dependency handlingDavid Oberhollenzer
Always try to gather all compressor libraries available, but only complain about missing a one if it has been *explicitly* selected. If a compressor has been explicityl disabled, we can still turn it off after checking. Also, rework gensquashfs to set the default compressor based on what's available. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-08Replace e-mail addressv0.1David Oberhollenzer
I did this in my spare time, so replace the company address with the infraroot.at address. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-05-19Add ZSTD compressor implementationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-05-19Add SELinux labeling to fstree codeDavid Oberhollenzer
Use libselinux to lookup the context attributes from a file. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-05-06Add lz4 compressor implementationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-05-06Add LZO compressor implementationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-05-04Rename lzma compressor to xz, zlib compressor to gzipDavid Oberhollenzer
Stick to the terminology that SquashFS uses. SquashFS uses "lzma" to refere to lzma1, "xz" to refere to lzma2 and confusingly "gzip" to refere to raw zlib deflate. We can avoid a lot of confusion by _consistently_ using the same terminology. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-05-03Add configure switches for compressorsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-04-30Initial commitDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 06:29:59 +0000