summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-06-07Move the fragment deduplication hash table back into the block processorDavid Oberhollenzer
Fragment deduplication really doesn't belong into the public API of the fragment table. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-07block processor: add an internal common cleanup functionDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04Fix compressor config union size testDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04Cleanup: libcommon: use global LUTs for compressor optionsDavid Oberhollenzer
Instead of the convoluted logic, simply use a small number of LUTs that point to the available compressor flags for each compressor, the avaialble options and their ranges. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04Cleanup: Pull compression level parameter out into compressor configDavid Oberhollenzer
Every compressor (except LC4) has a compression level parameter. This commit pulls the compression level field out into the generic configuration structure and applies some code clean ups as a result from this. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04Strictly enfore min/max dictionary size in XZ & LZMA compressorsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04lzma compressor: support micro management optionsDavid Oberhollenzer
The LZMA compressor (through the xz-utils library) supports basically the same options for micro management as the XZ compressor. This commit enables support for those options in the compressor, the option parser and adds an option field to the configuration structure. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-04lzma compressor: add support for the "extreme" flagDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-03Cleanup: Add defines for minimum and maximum block sizeDavid Oberhollenzer
This commit adds propper defines in the super block header and removes some of the hard coded constants. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-02Cleanup: clear naming confusion lzma vs xz in some commentsDavid Oberhollenzer
Previously, the XZ compressor was called LZMA at some points in the code, because it actually referres to LZMAv2 and the older LZMAv1 wasn't implemented. Since LZMAv1 is supported for some time now, simply calling it LZMA is confusing. This commit tries to replace the last bits where XZ is referred to as LZMA, which turns out to be only a hand full of comments. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-06-02tar2sqfs: add missing copyright headerDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Fix: Only add Selinux flags if WITH_SELINUX is setDavid Oberhollenzer
On a current Fedora 31, when cross compiling with mingw, pkg config manages to find the Selinux library, but not the header. The configure script disables WITH_SELINUX, but the library variable is still set, causing a linker error further down the line. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30sqfs2tar: Move hard link detection to tree-repacking codeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Cleanup: sqfs2tar: break up and simplify the repacking codeDavid Oberhollenzer
- Move the xattr extraction and repacking to xattr.c - Don't on-the-fly delete the tar xattr list, use the function from libtar.a - Split minor tasks into static helper functions - creating a libtar xattr struct from libsqfs xattr data - finding a hard link entry from current path and inode number Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Cleanup: Reorganize structure of Automake filesDavid Oberhollenzer
- Split up the huge file in bin/ into one small file per sub directory - Remove the stub in doc/ Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Cleanup: move man pages to the respective program source directoriesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Cleanup: try to split tar2sqfs.c in a reasonable wayDavid Oberhollenzer
This commit breaks tar2sqfs.c into multiple files: - options.c contains the command line argument processing - process_tarball.c contains the main tar repacking code - tar2sqfs.c contains what is left (the main function) - A header is added for gluing it all together. No actual code is changed. The tar repacking code is slightly modified to pass the sqfs writer and input file pointer around as argument rather than using a global variable. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Cleanup: try to split sqfs2tar.c in a reasonable wayDavid Oberhollenzer
This comit breaks sqfs2tar into multiple files: - options.c contains the command line argument processing - write_tree.c contains the code for generating the actual tar archive - sqfs2tar.c contains what is left - A header is added for glueing it all together. No actual code is changed. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-30Block processor: cleanup macros, merge windows & pthread initializationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: merge finish & sync functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: allow operation without a fragment tableDavid Oberhollenzer
This commit modifies the block processor to support operating without a fragment table. If that is the case, fragment deduplication is essentially disabled and fragment blocks aren't indexed anymore. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: Add a raw block submission functionDavid Oberhollenzer
This function allows submission of raw blocks to the block processor, completely bypassing the file API. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: add flags to manage hashing & sparse block detectionDavid Oberhollenzer
This commit adds 2 new user settable flags to the block processor: - A flag to ignore sparse blocks and treat them like normal data blocks. - A flag to disable checksum computation altogether. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Support associating a user pointer with data blocksDavid Oberhollenzer
This commit modifies the block processor to support associating a user data pointer with data blocks that it forwards to the block writer, which is modified to accept an optional user data pointer. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Block processor: turn internal functions into interface entry pointsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Make the block processor inode management optionalDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29Turn the sqfs_block_writer_t into an interfaceDavid Oberhollenzer
This way, everything that could be done through the hooks (and more) can be done by simply providign a custom implementation. The result is a lot clener that the previous hook based version. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29cleanup: libsqfs: eliminate block writer statisticsDavid Oberhollenzer
- the "bytes submitted" can be moved over to the block processor - the number of blocks submitted are already there (implcitily, by adding the data block count to the fragment block count) - actual data bytes written can be computed from the super block - the remaining block count can be changed to simple counter that can be obtained through a function. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-29cleanup: libsqfs: remove hooks from sqfs_block_writer_tDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-26sqfsdiff: extract compressor options, but don't fail on errorDavid Oberhollenzer
This commit modifies sqfsdiff to extract the compressor options from the squashfs image and store them in a compressor configuration if possible. The failure path is modified to *not* burst into flames on error, because those options are not required by any compressor to read data from the disk and pretty much every vendor modifed SquashFS has messed with those to the point that they cannot be propperly decoded (or the flag is set and there are no options). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-24Minor fixes/cleanups in the block processorDavid Oberhollenzer
- Move the inode modifications out of do_block. The inode may be reallocated in parallel by the process_completed_block function, so it is not safe to store the fragment location in the do_block function which is used from the worker threads. - Move the accounting of fragment blocks to the process_completed_block function. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-24Cleanup: split the block processor common.c againDavid Oberhollenzer
This commit breaks the common code up again by moving the data submission code to a separate file, making both a little bit more readable. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-24block processor: promote fragments to fragment blocksDavid Oberhollenzer
Instead of [potentially] allocating a new fragment block, take an existing fragment and promote it to the fragmenet block. This saves as a potential block allocation and a memcpy of the initial data. Also it *definitely* removes block allocation from the backend path of the block processor. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23block processor: move the block consolidation to the worker threadDavid Oberhollenzer
Instead of merging fragments into the fragment block inside the process_completed_fragment function, store a linked list of fragments in the fragment block and do the actual merging (several memcpy calls totaling of up to 1M of data in worst case) in the worker thread instead of the locked, serial path. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23block processor: recycle blocks to reduce allocation pressureDavid Oberhollenzer
Instead of freeing/allocating blocks all the time in the locked, serial path, use a free list to "recycle" blocks. Once a block is no longer used, throw it onto the free list. If a new block is, needed try to get one from the free list before calling malloc. After a few iterations, the block processor should stop allocating new blocks and only re-use the ones it already has. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23block processor: don't zero initialize the block payload areaDavid Oberhollenzer
In the block processor, the payload area is only accessed up to the indicated size. Even the part that is accessed is initialized by copying data into the block before increasing the size, so there is no real point in zero-initializing hundres of kilobytes if not megabytes of payload area, especially since this is done in the locked, serial path of the block processor. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-23Update benchmark numbers for zstd, now that it uses correct parametersDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21Update CHANGELOG.mdDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21Fix: zstd: actually set the compression level from the optionsDavid Oberhollenzer
In the zstd compressor, the compression level from the configuration structure wasn't used at all. Instead, the zstd compressor was told to use level 0 and compressor options with that parameter were written to disk. This commit makes sure the level parameter is propperly initialized. Reported-by: Sébastien Gross Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21hash table: switch to sqfs_* types, mark functions as hiddenDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21Update CHANGELOG.mdDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-21Fix the semantics of the super block deduplicationDavid Oberhollenzer
Its purely informational, but make sure other programs don't print out scary messages that imply the data has been ineficiently. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-19Cleanup: move hash table header to include directoryDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-18libtar: fix size computation of PAX line lengthDavid Oberhollenzer
This commit attempts to fix the following two problems: - The number of digits computation returning an off-by-one result if the number is 10, or the resulting digit string starts with "10". This results in one-too-many padding bytes, corrupting the rest of the archive since the headers now don't start at multiples of 512 anymore. - Adding the line length prefix affects the line length (duh). If it grows far enough to require more digits, the result is a similar problem. This is a converging series that we need to compute the limit of. Unit tests for this still need to be added. Or maybe I can convince a bored undergrad student to provide an induction proof. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-16Update documentationDavid Oberhollenzer
- Some clarifications - Some typo fixes Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-07Fix checksums for the corpus tests now that -T actually worksDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-07Fix compilation on GCC4 and belowBrandon Maier
When compiling with GCC4 the following error occurs. > lib/util/rbtree.c:140: undefined reference to `__builtin_uaddl_overflow' This is because __builtin_uaddl_overflow() and the other __builtin_u{add,mul}{,l,ll}_overflow() functions are only defined in GNUC < 5 for Clang. When using GCC4 and below they are not defined. Since the SZ_ADD_OV and SZ_MUL_OV are only used to check 'size_t' type values. And overflow on add and multiply of unsigned types is defined behaviour (C Standard 6.2.5 paragraph 9). It's simple to write overflow functions for this specific case. These are based on the overflow wrappers from the SEI CERT C Standard INT30-C. [1] https://gcc.gnu.org/gcc-5/changes.html Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
2020-05-04Expose more fine grained control values & flags on the XZ compressorDavid Oberhollenzer
This patch allows external users to fiddle with the XZ compressors compression strength, alignment and other values. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-04Fix: propperly set the last block flag if fragments are disabledDavid Oberhollenzer
If a file consisting of multiple blocks is produced, the last block is short and the don't fragment flag is set, the last block flag has to be set on the block when we flush it, so the processing pipeline does it's job correctly. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-05-03Actually run the directory pack test if corpora tests are desiredv0.9.1David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>