summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-08-19Fix memory leak in data writer error code pathsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-19Fix memory leak in dir-scan error code pathDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Replace update_crc32 helper function with crc32 from zlibDavid Oberhollenzer
It is optimized to the maximum and if we already use zlib anyway, why not use zlib crc32? This also makes zlib a hard dependency which also means the whole "do we have a compressor" sanity check in the build system can be removed. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Make data writer use block processorDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Restructure data writer around passing block_t structuresDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Minor interface change to data writerDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18cleanup: internalize deduplication list in data_writerDavid Oberhollenzer
This change removes the need for passing a list of files around for deduplication. Also the deduplication code no longer needs to worry about order, since the file being deduplicated is only added after deduplication is done. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Add pthread based, parallel block processor implementationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-18Add block processor data structureDavid Oberhollenzer
The interface is designed for parallel, asynchronuous processing of data blocks with an I/O callback that handles the serialized result. The underlying implementation is currently still synchronuous. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-16Add deep-copy function to compressor interfaceDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-16Import ax_pthread.m4David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-16Fix: don't try to read xattrs if there are noneDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-12Fix name prefix of ax_compile_check_sizeof.m4David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-11cleanup: zero-initialize gensquashfs options with memsetDavid Oberhollenzer
Manual initialization is not only verbose, it actually caused a bug in a past version. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-11cleanup: replace gensquashfs bool options for dir scan with flagsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-11Add gensquashfs option to read xattrs from input filesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-11Fix wrong argument type for gensquashfs --keep-timeDavid Oberhollenzer
Copy paste mistake: the propper type should be no_argument as it is only a simple flag and doesn't take extra arguments. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-11Split gensquashfs help string because it got too longDavid Oberhollenzer
There is an upper limit of characters in a string literal that it managed to cross. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-11Add --one-file-system option to gensquashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-11Replace fstree_from_dir boolean with flag fieldDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-09Add option to sqfsdiff to extract regular files that are differentDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Fix resource leak in error branch for fscompare compare_filesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Add documentation for sqfsdiffDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Add flag to sqfsdiff to compare the fields in the super blockDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Add flag to sqfsdiff to compare inode numbersDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Add flag to difftool to also compare time stampsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Add flag to sqfsdiff to skip comparing filesystem contentsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Extend filesystem diff utility to work on squashfs imagesDavid Oberhollenzer
Since it already works on an fstree_t instance (constructed from the input paths), and we now have a handy sqfs_reader_t, it is quite simple to extend. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Add a helper utility to compare filesystem treesDavid Oberhollenzer
The intended use case is to compare two mounted or unpacke squashfs images, so a repacked test image can be compared against its original or an image unpacked with unsquashfs can be compared with an image unpacked by rdsquashfs or sqfs2tar. Since the tool is only intended to aid development (specifically automated testing), it is not installed by `make install`. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Add pread(2) like function to data_readerDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Fix forward seek when unpacking sparse filesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-07Fix zero padding of extracted data blocksDavid Oberhollenzer
Only padd it if the *extracted* size is less then block size. Doing it with the compressed size results in garbled blocks. Especially because most of them are less than block size when compressed. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-05cleanup data readerDavid Oberhollenzer
- Split block reading code out from "dump_blocks" into precache_data_block, similar to precache_fragment_block - Merge the code paths for fragment/data block reading and uncompression Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-05cleanup: unify all the code that reads squashfs imagesDavid Oberhollenzer
This commit creates a new data structure called 'sqfs_reader_t' that takes care of all the repetetive tasks like opening the file, reading the super block, creating the compressor, deserializing an fstree and creating a data reader. This in turn makes it possible to remove all the duplicate code from rdsquashfs and sqfs2tar. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-04Improve file unpacking orderDavid Oberhollenzer
This commit moves the file unpacking order & job scheduling to a libfstree function. The ordering is improved by making sure fragment blocks are not extracted more than once and files with data blocks are extracted in order. This way, serial unpacking of a 2GiB Debian live image could be reduced from ~5' on my test machine to ~3.5', whereas parallel unpacking stays roughly the same (~3' for -j 4). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-04Fix functions with side effect being used inside assertsDavid Oberhollenzer
If -DNDEBUG is set, the entire thing is omitted from the output. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-04Make sure file listing generated by rdsquashfs -d is propperly escapedDavid Oberhollenzer
File names may contain traces of white space. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-03Fix tar header error reporting on 32 bit systemsDavid Oberhollenzer
If an extension header is rejected because its too big, the error path would print the size as size_t, altough it is an uint64_t. On 64 bit systems, this works because size_t is a 64 bit unsigned integer, on 32 bit systems, not so much. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-03cleanup: remove left over atime/ctime codeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-02Fix explicit NULL dereference in deserialize_fstree failure pathDavid Oberhollenzer
If we failed to create the root node, we don't need to cleanup the fstree_t which would attempt to recursively cleanup the root node. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-02cleanup: merge error paths in xattr reader restore_kv_pairsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-02Fix potential double free of xattr reader id_block_startsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-02Implement support for SOURCE_DATE_EPOCH environment variableDavid Oberhollenzer
reproducible-builds.org suggests the use of an environment variable as a source for time stamps: https://reproducible-builds.org/specs/source-date-epoch/ This commit adds support for setting the default mtime from the variable, if it is set and only defaulting to 0 if not. The timestamp given by the command line switch takes precedence. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Add flag to rdsquashfs to optionally set xattrs on unpacked filesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Update man pagesDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Add ability to sqfs2tar to optionally copy over xattrsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Add ability to write_tar_header to embedd extended attributesDavid Oberhollenzer
This commit patches the tar writer to generate a PAX header with SCHILY xattr key/value pairs if requested. The Schily format is used for two reasons: - It is simple - It is apparently more widely supported than the libarchive format Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Add option to rdsquashfs to dump extended attributes for an inodeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Add option to restore xattrs to deserialize_fstreeDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-08-01Add xattr reader implementation to recover xattrs from squashfsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>