Age | Commit message (Collapse) | Author |
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This file makes zero sense nowadays.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Fixed a problem when ECC was checked. The correction was not properly
done by subpage. Added more output for the moment to be able to figure
out more potential problems.
Added testcase: bin2nand2bin.sh and biterror inject program inject_biterror.pl
Interface
o ECC correction disabled by default. Switch to turn it
explicitly on. The user must specify what he wants to be done.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
The number is usefull to analyze cards with broken flash content.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
The extraction of data from blocks used for dynamic volumes was
totally broken. The data size was calculated wrong. This fix is not
perfect, the alignment is still ignored.
The parameter "header-size" is very misleading. It does not reflect
the vid hdr offset properly. I assume therefor that it only works for
the layout I am using where the vid hdr is at the _end_ of the 1st
NAND page (2048).
I added the generation of a textfile with information about the blocks
which are going into the internal graph representation.
Instead of a graph I think that a simple array will simplify the code
very much. The array must than be sorted properly to cope with older
and newer block-copies but that should not be a problem.
discussed the tool with my coleage Andreas Arnez and we found that it
might be a good idea to replace it even with a perl program for the
same purpose since that would offer the flexibility to change it on
the fly when needed. The tool is mainly used for crash analysis so it
could be an advantage to change it without needing a C-compiler.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
We have no good testcases for this kind of tool yet. Adding a 1st
draft.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Drake Dawsett had done some changes to our unubi which where not yet
published. I hereby send his latest code and integrated the parameter
handling which was changed in our version. When reviewing this very
huge patch we need to ensure that possible changes of others are not
reversed.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
This patchset migrates the remaining tools (pddcustomize, ubimirror and
pfiflash) to the new libubi.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
When bad blocks occur more debug information is needed.
To identify the bad blocks the blocksize is required.
The split block mode was added to generate files per
block. In split mode the bad block markers are analyzed
and a summary is printed at the end.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
The filename for the OOB data was wrongly assigned.
OOB data could therefore not be dumped.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Just silly hacks. Also remove udevsettle() invocation from UBI
library. If it must be called, it is not library's business
anyway. Wa added it to make scripts which use ubimkvol utility
run, so it is the only caller that really needs this. So
just move the cruft to the utility.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Rename __unused to ubi_unused to avoid clashes with system namespace
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
|
|
Creates the volume with maximum available size
Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This is a new feature for pfiflash, called "--compare". It allows the user
to simulate a pfiflash session without actually changing the flash
content. If the flash content is equal to the data in the pfif file,
pfiflash returns zero. A positive value is returned when the flash
content differs from the pfi file, which indicates that an update is
necessary. This feature is useful when a controller mounts an NFS share
during boot and has to determine if a pfi file stored on this share
contains a code update. Modified PDD values are also registered by the
compare feature.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
|
|
Ubimirror compares volumes before they are mirrored, but discards the
result of the comparison and alway copies volumes.
I've tested this code with equal and unequal volumes and it seems to work
fine now.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
|
|
libubimirror has several odd intendations and spacing errors.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
|
|
This patch fixes UBI tests and adds udev problems solution description.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
|
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
|
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
|
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
|
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
|
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
|
Fix problem with multiple ubi devices
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
|
|
Incrementing the version number was forgotten in the previous patch.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
|
|
Pfiflash should erase raw flash regions before overwriting them and check for
bad blocks in case of NAND flash.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
|
|
The variable written was not properly initialized. That causes the
-j option to fail.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
|
|
Fix the syntax description in the help and usage messages for ubiupdatevol.
Signed-off-by: Timo Lindhorst <lindhors@linux.vnet.ibm.com>
|
|
|
|
Remove getopt extern declarations
Minor whitespace cleanups
Remove incorrect program names that snuck in during getopt rewrite
Change comments to match reality
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
The tools had a mixture of different version numbers. This is changed now.
The internal change to move to remove glibc dependencies should be reflected
by an increase of the version number, so that we can react if trouble is
seen with the new code.
Singed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Various little fixes including some whitespace fixups.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
|
|
The file containing the data needs to be added as argument.
The support got lost when removing the argp parsing.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Frank Haverkamp <haver@vnet.ibm.com>
|