aboutsummaryrefslogtreecommitdiff
path: root/ubi-utils
AgeCommit message (Collapse)Author
2016-11-17Add support for sysfs mockingDaniel Walter
In order to use test files, allow sysfs root to be set during compile time Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
2016-11-17Change build system to autotoolsRichard Weinberger
This patch is largely based on Richards original RFC. The major differences to the RFC patch are: - Add missing sumtools & mtdpart targets - Fix name of mkfs.jffs2 target - Add missing subdir-objects option for non-recursive make - Move all automake options to configure.ac - Add manpages to install target - Make XATTR & LZO support configurable - Install binaries to sbin directory like in the old build system - Install flash_erase wrapper script - Add files missing from distribution target Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-09-29mtd-utils: ubinize: Always return error code (at least -1) in case of an errorEnrico Jorns
ubinize should not fail silenty, this can be very annoying when using it from other tools that rely on the exit code for determining the success of their operation. Signed-off-by: Enrico Jorns <ejo@pengutronix.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-07-06mtd-utils: fix 'new blank line at EOF' problemsDongsheng Yang
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-07-06mtd-utils: fix the trailing whitespace problemsDongsheng Yang
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-11-04libmtd: don't ignore "region index" parameter in mtd_regioninfo()Brian Norris
ioctl(MEMGETREGIONINFO) has one input parameter (regionindex) and three output parameters (info about the erase region). There are two problems in mtdinfo/libmtd here: 1. mtdinfo.c doesn't initialize its region_info_user struct, instead passing uninitialized data to mtd_regioninfo() 2. mtd_regioninfo() fails to utilize the 'regidx' parameter to fill out the regionindex parameter properly, so the garbage from mtdinfo.c is propagated to the ioctl() This means that mtdinfo will continuously probe the same (possibly out-of-range) erase region, instead of looping over the valid regions. Let's fix this in the mtd_regioninfo() helper, and at the same time, let's zero out the mtdinfo.c buffer, as an additional precaution to keep from using uninitialized data. Initial error report from Yang, when running "mtdinfo /dev/mtd0" on a Cavium 6100 board: root@CN61XX:~# mtdinfo /dev/mtd0 mtd0 Name: phys_mapped_flash Type: nor Eraseblock size: 65536 bytes, 64.0 KiB Amount of eraseblocks: 128 (8388608 bytes, 8.0 MiB) Minimum input/output unit size: 1 byte Sub-page size: 1 byte Additional erase regions: 0 Character device major/minor: 90:0 Bad blocks are allowed: false Device is writable: true libmtd: error!: MEMGETREGIONINFO ioctl failed for erase region 0 error 22 (Invalid argument) Eraseblock region 0: info is unavailable libmtd: error!: MEMGETREGIONINFO ioctl failed for erase region 1 error 22 (Invalid argument) Eraseblock region 1: info is unavailable Reported-by: Yang Wei <Wei.Yang@windriver.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-09-16ubiformat: fix the subpage size hint on the error pathArtem Bityutskiy
David Binderman <dcb314@hotmail.com> reports that the following piece of looks wrong: if (!args.subpage_size != mtd->min_io_size) normsg("may be sub-page size is incorrect?"); I totally agree with him and I believe that we actually meant to have no negation in fron to f 'args.subpage_size', so instead, the code should look like this: if (args.subpage_size != mtd->min_io_size) normsg("may be sub-page size is incorrect?"); Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-04-07ubiformat: correct "non-ubifs" warning messageBrian Norris
UBI's raw flash scan actually scans for UBI data, not UBIFS data (there *are* UBI users that are not UBIFS!), so correct the warning message. This also matches the comment in libscan.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-03-31ubi-utils: Fix file descriptor leaks in libubiDaniel van Gerpen
Amended by Artem. Signed-off-by: Daniel van Gerpen <daniel@vangerpen.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2014-03-25ubi-utils: Add ubiblock toolEzequiel Garcia
With the addition of block device access to UBI volumes, we now add a simple userspace tool to access the new ioctls. Usage of this tool is as simple as it gets: $ ubiblock --create /dev/ubi0_0 will create a new block device /dev/ubiblock0_0, and $ ubiblock --remove /dev/ubi0_0 will remove the device. Artem: slightly changed the header comment. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-10-22check the MLC nand typeHuang Shijie
In the current code, the MTD_NANDFLASH stands for both the SLC and MLC. In the kernel, the MTD_NANDFLASH only stands for the SLC now, so in order to keep the logic unchanged, we should also check the MLC NAND by MTD_MLCNANDFLASH. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-07-01ubiupdatevol: add a --skip optionMike Frysinger
This already has a --size option for controlling how many bytes to read from the input. Add a --skip option to control the offset into the input too. This way people don't have to do `dd | ubiupdatevol`. While we're here, I've fixed the types used with args.size and the read loop so that they can hold the right sizes (like setting a 32bit+ size). Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-07-01mtd-utils: new prompt() helper for talking to the userMike Frysinger
We've got a few tools that prompt the user for "yes/no" questions. Add a common helper to simplify the various implementations. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-07-01ubinize: fix usage textMike Frysinger
Drop duplicate "and the", and tweak grammar slightly. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-01-15ubiformat: fix error pathWolfram Sang
A few error paths were closing the device, although it was not opened yet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-01-15ubiformat: clean up synopsis of command-line parametersWolfram Sang
Add -Q and --image-seq, remove double -v Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-12ubiformat: really skip some messages when quietWolfram Sang
Both logic (only print when not quiet) and the indentation suggest that the braces around the block have been forgotten. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-25ubiformat: fix failure on big partitions (>4Gio)Richard Genoud
The offset (which is 64bits when mtd-utils are not compile with WITHOUT_LARGEFILE) is calculated like that: offset = nb * size; But nb and size are int, so on 32bits platforms, there's a possible overflow. So, it should be replace with: offset = (off_t)nb * size; If WITHOUT_LARGEFILE is defined, there still be an overflow, but it's what we want, right ? Cheney Chen tested an ubiformat on a NAND (5.9 GiB mtd part). Reported-by: Cheney Chen <cheneychencl2012@gmail.com> Tested-by: Cheney Chen <cheneychencl2012@gmail.com> Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-03ubirmvol: correct missing space on usageRichard Genoud
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-23ubiattach: fail if kernel ignores max_beb_per1024Richard Genoud
If the kernel doesn't know the max_beb_per1024 parameter in the attach ioctl, but the call still succeeded ubi_attach and ubi_attach_mtd will return 1 instead of 0. In this case, the ubiattach command will detach the device and fail with an error message. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-23ubiattach: introduce max_beb_per1024 in UBI_IOCATTRichard Genoud
The ioctl UBI_IOCATT has been extended with max_beb_per1024 parameter. This parameter is used for adjusting the "maximum expected number of bad blocks per 1024 blocks" for each mtd device. The number of physical erase blocks (PEB) that UBI will reserve for bad block handling is now: whole_flash_chipset__PEB_number * max_beb_per1024 / 1024 This means that for a 4096 PEB NAND device with 3 MTD partitions: mtd0: 512 PEB mtd1: 1536 PEB mtd2: 2048 PEB the commands: ubiattach -m 0 -d 0 -b 20 /dev/ubi_ctrl ubiattach -m 1 -d 1 -b 20 /dev/ubi_ctrl ubiattach -m 2 -d 2 -b 20 /dev/ubi_ctrl will attach mtdx to UBIx and reserve: 80 PEB for bad block handling on UBI0 80 PEB for bad block handling on UBI1 80 PEB for bad block handling on UBI2 => for the whole device, 240 PEB will be reserved for bad block handling. This may seems a waste of space, but as far as the bad blocks can appear every where on a flash device, in the worst case scenario they can all appear in one MTD partition. So the maximum number of expected erase blocks given by the NAND manufacturer should be reserve on each MTD partition. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-23libubi: kill ubi_attach_mtdArtem Bityutskiy
The 'ubi_attach_mtd()' is not used and it is redundant now. 'ubi_attach()' function may be used instead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-23libubi: factorize ubi_attach and ubi_attach_mtd codeRichard Genoud
The req->mtd_num value is now updated with the MTD device number found by mtd_node_to_num. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-22UBI: sync ubi-user.h with kernel v3.6-rc1Richard Genoud
Also remove the eraseblock type support, because kernel commit a65a0eb6d198e058687a9214683bd1c418f20d39 set the dtype parameter as obsolete. Also adjust to some renames: * 'UBI_PROP_DIRECT_WRITE' -> 'UBI_VOL_PROP_DIRECT_WRITE' * 'struct ubi_set_prop_req' -> 'struct ubi_set_vol_prop_req'. * 'UBI_IOCSETPROP' -> 'UBI_IOCSETVOLPROP' Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-02-14mtdinfo: correct grammar on error messageBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-02-02mtdinfo: fix `--all' for non-consecutive device numbersBrian Norris
When we have assigned non-consecutive device numbers to our MTD devices, then we run `mtdinfo --all', we get errors once mtdinfo tries to process the devices in the "hole". For instance, suppose that at boot time, we have one MTD (/dev/mtd0) then perform a sequence like the following: # modprobe mtdram # modprobe nandsim # rmmod mtdram Then at this point, we have should have devices 0 and 2 without 1. Then: # mtdinfo --all ... mtdinfo: error!: mtd1 does not correspond to any existing MTD device We add a check to first see if device is present, then continue to the next ID if it doesn't exist. Reported-by: Brian Foster <brian.foster@maxim-ic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-01-27ubinfo: fix `--all' for non-consecutive device numbersBrian Norris
When we have assigned non-consecutive device numbers to our UBI devices, then we run `ubinfo --all', we get errors once ubinfo tries to process the devices in the "hole". For instance, suppose there are two UBI devices, /dev/ubi0 and /dev/ubi10; then, ubinfo will fail trying to open /dev/ubi1 with: ubinfo: error!: cannot get information about UBI device 1 error 2 (No such file or directory) This patch adds a check to first see if device is present, then continue to the next ID if it doesn't exist. Reported-by: Brian Foster <brian.foster@maxim-ic.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-01-27libubi: make `ubi_dev_present()' a library functionBrian Norris
We will use this function in ubinfo. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-11-18Merge branch 'brian'v1.4.7Artem Bityutskiy
2011-11-18mtdinfo: provide info when used without argumentsBrian Norris
If the user specifies neither a MTD argument nor the `-a' flag, we print a cryptic message; i.e., # mtdinfo libmtd: error!: cannot get information about "(null)" error 14 (Bad address) mtdinfo: error!: cannot get information about MTD device "(null)" error 14 (Bad address) This is a regression; previously, mtdinfo would give some short info about number of devices, etc. when used without arguments. To fix this, we revert commit d53c03b0989f8354a7e4dbb947a150fc7fe3f6d1 and call print_general_info() when no device is specified. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
2011-09-19ubiformat: handle write errors correctlyArtem Bityutskiy
This issue was reported and analyzed by Anton Olofsson <anol.martinsson@gmail.com>: when ubiformat encounters a write error while flashing the UBI image (which may come from a file of from stdout), it correctly marks the faulty eraseblock as bad and skips it. However, it also incorrectly drops the data buffer which was supposed to be written, and reads next block of data. This patch fixes this issue - in case of a write error, we preserve the current data and write it to the next eraseblock, instead of dropping it. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11libmtd: modify `mtd_write' to cover OOB writesBrian Norris
To support the MEMWRITE ioctl, we will need a different sort of libmtd interface for writing to flash. We will expand mtd_write to include more functionality; for now, we just change the function definition and description as we begin to add the actual functionality. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-20mkfs.ubifs/ubinize: increase PEB size limit to 2MiBViktar Palstsiuk
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
2011-08-16mtdinfo: consolidate help as display_help()Brian Norris
The help message for mtdinfo is unnecessarily disjointed. It is split into three strings which reuse the PROGRAM_NAME string inefficiently and don't have a consistent style. This fixup should provide a cleaner look with aligned columns and easier-to-read source code. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-16mtdinfo: fixup "example usage" help sectionBrian Norris
Line up columns better so that everything is more readable. Remove "Example 1" since `mtdinfo' does not print information when not given any arguments. Remove "...UBI layout information" from description of Example 4, since Example 4 (now 3) doesn't include the `-u' flag. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-16mtdinfo: restructure help messageBrian Norris
We weren't very consistent in how we listed our options in the mtdinfo help string (listing short options, long options, or both). Plus, not all options are inter-operable, so we should distinguish this somewhat. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-16mtdinfo: refactor code to remove "args.all" dependencyBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-16mtdinfo: don't open NULL pointer when getting region_info with `-a'Brian Norris
This "fixes" a regression found in: commit 266061ebd5d72391f0a0e831b018e8fc7fea68a1 mtdinfo: add regioninfo/eraseblock map display On certain flash (NOR flash that have eraseblock region info), `mtdinfo -a' tries to open the MTD node file, for use with the ioctl MEMGETREGIONINFO; however, we didn't supply a device node path to `mtdinfo -a', so it's using NULL, resulting in errors like: mtdinfo: error!: couldn't open MTD dev: (null) error 14 (Bad address) For now, we can just skip dumping region_info with the `-a' flag. If we find a better way to do this (e.g., export via sysfs, find device nodes via automatic routines, etc.), then we can kill the workaround and this FIXME should be removed. The regression was first reported at: http://lists.infradead.org/pipermail/linux-mtd/2011-July/037232.html The result of recent changes is that we cannot get region_info for devices via the `--all' option. We add a note in the help message warning that mtdinfo may find more info when given a device patch, e.g., /dev/mtdX. Reported-by: Brian Foster <brian.foster@maxim-ic.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-06-30mtdinfo: remove -m leftoversArtem Bityutskiy
We have removed the -m option, but did not remove args.mtdn which represents the -m parameters. Kill args.mtdn as well. Tweaked by Brian Norris. Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2011-06-29mtdinfo: kill -m optionBrian Norris
According to feature-removal-schedule, we shouldn't use `-m', since it relies on a specific device-naming pattern. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-utils: switch more utils to unified versioningBrian Norris
More utilities now use the common VERSION system. For utils that printed a very simple message, we use the new common_print_version() "function." Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-utils: remove whitespace at end of linesBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-27rewrite build system to avoid recursionMike Frysinger
The ubi-utils/src/ subdir is tossed as it just complicates things for no real gain. The dictionary.h header is relocated to the ubi-utils/include/ since other headers in there need it. The top level clean is replaced with a `find -delete` on objects, so it might prune more than necessary, but many projects now do this sort of thing and no one complained there. A "mkdep" helper generates the actual rule, and the variables are used with "foreach" to expand these automatically. The tests subdir is updated only to reflect the ubi-utils source move. Otherwise, it is left untouched as making that non-recursive isn't really worth the effort. While we're gutting things, also through in kbuild style output while building to make things more legible. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-25mtd-utils: bump nanddump, mtdinfo version numbersBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-09mtdinfo: add regioninfo/eraseblock map displayMike Frysinger
This brings the mtdinfo utility in line with the functionality of the flash_info utility. It dumps the erase regioninfo (if the devices has it) as well as showing a handy eraseblock map (if the user has requested it). The eraseblock map also shows which blocks are locked and which ones are bad. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-09mtdinfo: remove now unused ubigen infoMike Frysinger
A previous commit moved the code using this var into a diff func. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-08mtdinfo: separate out ubi information printingArtem Bityutskiy
We are going to add some more code which prints eraseblocks map, so we need to make 'print_dev_info()' a bit smaller to keep the code readable. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-08ubi-utils: send help/version info to stdoutMike Frysinger
Usage/version information should go to stdout when it is expected behavior (i.e. the user requested it explicitly). This info should go to stderr only when the usage info is being shown as a result of incorrect options. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-07mtdinfo: deprecate the -m optionArtem Bityutskiy
... because mtd device node name do not have to follow the "/dev/mtd%d" pattern. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-31ubi-utils: ubimkvol: fix parameters parsing regressionArtem Bityutskiy
Commit 924862c864da0b62cf93ba7abf2dc78a7e6ac48f broke ubimkvol parrameters parsing by initializing the 'error' parameter of 'simple_strtoul()' to 1 instead of 0. This patch fixes the issue. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 18:16:54 +0000