| Age | Commit message (Collapse) | Author |
|---|
|
This changeset fixes a feature regression in ubiformat. Older versions of
ubiformat, when invoked with a flash-image, would return 0 in the case no error
was encountered. Upon upgrading to latest, it was discovered that ubiformat
returned 255 even without encountering an error condition.
This changeset corrects the above issue and causes ubiformat, when given an
image file, to return 0 when no errors are detected.
Tested by running through my loading scripts and verifying ubiformat returned
0.
Signed-off-by: Barry Grussling <barry@grussling.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The original code had a 'goto out_close' directly after a return error
code, which is obviously not what was intended.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Image sequence number for the UBI header can be specified for the
ubiformat tool according to the documentation and the help message for
ubiformat. The CLI option --image-seq for image sequence number is not
supported. -Q option for image sequence number is silently ignored.
This patch adds the CLI support for image sequence number.
Signed-off-by: Amol Vengurlekar <amol.sven@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
When we create a ubi image by ubinize, a UBI_LAYOUT_VOLUME_ID
volume will be created by ubigen_write_layout_vol().
However, after the commit 4c00cf2c5816 (ubiformat: remove
no-volume-table option), ubiformat remove novtbl args in format().
As a result, it will also create a layout volume.
When we attempt to do ubiattach, it will fail for ubi_compare_lebs error:
ubi0 error: ubi_compare_lebs: unsupported on-flash UBI format
ubi0 error: ubi_attach_mtd_dev: failed to attach mtd1, error -22
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Using the -n or --no-volume-table flags, ubiformat can format an mtd device
to a broken UBI that does not attach on recent kernel. Only very old UBIs
had no volume table.
This patch removes the option entirely from ubiformat.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
If libmtd_open fails, the program always exists with failure status
and prints "MTD subsystem is not present".
Even `ubiformat --help` produces the same result, which is definitely
undesired.
This patch moves command line option processing first to get the desired
behavior.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Do not cast percent to double, it is just used as upper limit.
Avoid floating point to fix compilation for aarch64 against klibc:
error: '-mgeneral-regs-only' is incompatible with floating-point code
| int percent = ((double)si->ok_cnt)/si->good_cnt * 100;
| ^~~~~~~
Notes:
* The checks in the code above this line ensure that si->good_cnt is not 0.
* The code assumes si->good_cnt * 100 will not overflow, then we can use
(si->ok_cnt * 100) safely because the former is bigger.
* The truncated result does not affect the logic:
i.e. a value of 49.9 is truncated to 49 and is still <50.
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The tools in question will quit with an exit code 0 if the command
line option was not recognized. By returning an error code a calling
script has the possibility to distinguish between a real success and
an invalid invocation.
We need to return -1 instead of EXIT_FAILURE to be consistent with the
other exit code places.
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The documentation of libmtd_open says, if it returns NULL and errno is
zero, MTD is not present. However, the current version always returns
a libmtd_t object. The function internally checks, if it can access the
MTD sysfs files and, if not, sets a flag to use the procfs fallback.
This patch adds an additional check to libmtd_open, to test if the
MTD procfs file can be read and fails with errno cleared if it does
not exist.
Furhtermore, mtd_get_info is documented to fail with errno set to ENODEV
if MTD is not present. First of all, this was broken in the original
version. It was implemented to specification for the sysfs code path,
but if MTD is not present, that won't be executed, because of the flag
set by libmtd_open. This makes the check not only redundant, but masks
an actual error (the sysfs paths suddenly not being readable anymore).
The legacy path that was used if the sysfs files are not avaible fails
with ENOENT if it cannot read the procfs file. With the above changes
in addition, we don't have a libmtd_t object if neither sysfs nor
procfs is readable, so this error status no longer makes sense.
This patch removes the documentation on the ENODEV errno, and
makes sure that mtd_get_info always returns with apropriate errno
on failure.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This patch moves the remaining 3 functions from ubiutils-common.{c,h}
into libmtd common.{c,h}.
The functions are only generic utility functions that other mtd-utils
programs may also find usefull and every program that uses libubi links
against libmtd anyway so there is no real reason for keeping around a
seperate ubiutils-common with only generic helper functions.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
David Binderman <dcb314@hotmail.com> reports that the following piece of looks
wrong:
if (!args.subpage_size != mtd->min_io_size)
normsg("may be sub-page size is incorrect?");
I totally agree with him and I believe that we actually meant to have no
negation in fron to f 'args.subpage_size', so instead, the code should look
like this:
if (args.subpage_size != mtd->min_io_size)
normsg("may be sub-page size is incorrect?");
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
UBI's raw flash scan actually scans for UBI data, not UBIFS data (there
*are* UBI users that are not UBIFS!), so correct the warning message.
This also matches the comment in libscan.h.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
We've got a few tools that prompt the user for "yes/no" questions.
Add a common helper to simplify the various implementations.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
A few error paths were closing the device, although it was not opened
yet.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Add -Q and --image-seq, remove double -v
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Both logic (only print when not quiet) and the indentation suggest that
the braces around the block have been forgotten.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
|
|
This issue was reported and analyzed by
Anton Olofsson <anol.martinsson@gmail.com>:
when ubiformat encounters a write error while flashing the UBI image (which may
come from a file of from stdout), it correctly marks the faulty eraseblock as
bad and skips it. However, it also incorrectly drops the data buffer which was
supposed to be written, and reads next block of data.
This patch fixes this issue - in case of a write error, we preserve the current
data and write it to the next eraseblock, instead of dropping it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
To support the MEMWRITE ioctl, we will need a different sort of libmtd
interface for writing to flash. We will expand mtd_write to include more
functionality; for now, we just change the function definition and
description as we begin to add the actual functionality.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
More utilities now use the common VERSION system.
For utils that printed a very simple message, we use the new
common_print_version() "function."
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
The ubi-utils/src/ subdir is tossed as it just complicates things for no
real gain. The dictionary.h header is relocated to the ubi-utils/include/
since other headers in there need it.
The top level clean is replaced with a `find -delete` on objects, so it
might prune more than necessary, but many projects now do this sort of
thing and no one complained there.
A "mkdep" helper generates the actual rule, and the variables are used
with "foreach" to expand these automatically.
The tests subdir is updated only to reflect the ubi-utils source move.
Otherwise, it is left untouched as making that non-recursive isn't really
worth the effort.
While we're gutting things, also through in kbuild style output while
building to make things more legible.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
