| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Remove all old tools because I cannot maintain them and the original
authors do not seem to have time for this. Some of the tools do not
work properly, some are just vague and undocumented and seem to be
oriented to the environment of the IBM guys. Nevertheless, I'll
return the tool as is in the next commit, becouse they are still
useful.
This commit also adds a ubinize utility to generate UBI images.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This commit basically removes most of the old ubi utilities
as they are barely maintainamble.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Make it not depend on pdd and pass flash-related parameters via
command line instead.
Make it look more like the other UBI utilities. It still needs some
more work.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Also remove error messages stuff from pfi2bin
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This tool is not really needed and is unused.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Make ubigen consistent with other UBI utilities
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Update UBI headers which requires some renameing changes.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Fix incorrect output of ubinfo like
"Amount of available logical eraseblocks: 00 bytes)"
which should look like
"Amount of available logical eraseblocks: 0 (0 bytes)"
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Both tools were lacking support of alternate ECC layouts. Only our intitial
format was supported. With this change, it should be very easy to add more
layouts in addtion to the already supported ones, which are: IBM (our format),
and the MTD default layout. NAND OOB sizes of 512 and 2048 are currently
supported.
In contrast to the old version of bin2nand, the holes inbetween the ECC data
is now not filled with 0x00 anymore but instead 0xff (like deleted flash) is
used. This should not cause any difference. The testcase reflects the different
layouts too.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Library functions never reset errno to zero, so if you want
to use its value to check for errors then you must set it to zero
before calling the library function (in this case readdir).
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Add 2 new utilities to attach and detach UBI devices.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Just few cleanups to make it consistent with other utilites.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
... to tests/ubi-tests/
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Since control device is not supported by UBI in mainline kernels,
we should not panic if it is absent.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Since there is often confusion what "eb" is - physical or logical
eraseblock. Fix libubi and change "eb" to "leb".
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Add an 'ubiupdate' utility which is basically a changed and cleaned-up
version of ubiupdatevol. It is also consistent with other ubi tools.
ubiupdatevol should go away, because it has features which should not
be present in tools for end users. If one needs debugging capabilities,
he should create a separate program.
So, I do not delete ubiupdatevol, but it will be moved somwthere later.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This patch fixes a libubi bug and does some random minor cleanups.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Add new handy UBI utility which prints various type of UBI information.
This commit also includes a lot of fixes and cleanups in libubi, and
other utilities. It was quite complex to separate this all out and
I figured that nobody anyway would really need this, and decided to
save my time for more useful things.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Plus some more ubimkvol clean-ups
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Plus some additional clean-ups.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Add udevsettle call to libubi which is not compiled in by default.
We need this for UBI testing.
Also, add one more TODO note
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Fixed a problem when ECC was checked. The correction was not properly
done by subpage. Added more output for the moment to be able to figure
out more potential problems.
Added testcase: bin2nand2bin.sh and biterror inject program inject_biterror.pl
Interface
o ECC correction disabled by default. Switch to turn it
explicitly on. The user must specify what he wants to be done.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
The number is usefull to analyze cards with broken flash content.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
The extraction of data from blocks used for dynamic volumes was
totally broken. The data size was calculated wrong. This fix is not
perfect, the alignment is still ignored.
The parameter "header-size" is very misleading. It does not reflect
the vid hdr offset properly. I assume therefor that it only works for
the layout I am using where the vid hdr is at the _end_ of the 1st
NAND page (2048).
I added the generation of a textfile with information about the blocks
which are going into the internal graph representation.
Instead of a graph I think that a simple array will simplify the code
very much. The array must than be sorted properly to cope with older
and newer block-copies but that should not be a problem.
discussed the tool with my coleage Andreas Arnez and we found that it
might be a good idea to replace it even with a perl program for the
same purpose since that would offer the flexibility to change it on
the fly when needed. The tool is mainly used for crash analysis so it
could be an advantage to change it without needing a C-compiler.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Drake Dawsett had done some changes to our unubi which where not yet
published. I hereby send his latest code and integrated the parameter
handling which was changed in our version. When reviewing this very
huge patch we need to ensure that possible changes of others are not
reversed.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
This patchset migrates the remaining tools (pddcustomize, ubimirror and
pfiflash) to the new libubi.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
When bad blocks occur more debug information is needed.
To identify the bad blocks the blocksize is required.
The split block mode was added to generate files per
block. In split mode the bad block markers are analyzed
and a summary is printed at the end.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
The filename for the OOB data was wrongly assigned.
OOB data could therefore not be dumped.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Just silly hacks. Also remove udevsettle() invocation from UBI
library. If it must be called, it is not library's business
anyway. Wa added it to make scripts which use ubimkvol utility
run, so it is the only caller that really needs this. So
just move the cruft to the utility.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Rename __unused to ubi_unused to avoid clashes with system namespace
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Creates the volume with maximum available size
Signed-off-by: Zoltan Sogor <weth@inf.u-szeged.hu>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This is a new feature for pfiflash, called "--compare". It allows the user
to simulate a pfiflash session without actually changing the flash
content. If the flash content is equal to the data in the pfif file,
pfiflash returns zero. A positive value is returned when the flash
content differs from the pfi file, which indicates that an update is
necessary. This feature is useful when a controller mounts an NFS share
during boot and has to determine if a pfi file stored on this share
contains a code update. Modified PDD values are also registered by the
compare feature.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
|
|
Ubimirror compares volumes before they are mirrored, but discards the
result of the comparison and alway copies volumes.
I've tested this code with equal and unequal volumes and it seems to work
fine now.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
|
|
libubimirror has several odd intendations and spacing errors.
Signed-off-by: Alexander Schmidt <alexs@linux.vnet.ibm.com>
Signed-off-by: Artem Bityutskiy <dedekind@infradead.org>
|
|
This patch fixes UBI tests and adds udev problems solution description.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Adrian Hunter <ext-adrian.hunter@nokia.com>
|
