Age | Commit message (Collapse) | Author |
|
KiB, MiB and GiB should be used instead.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Increase ubiformat version to reflect the fact that now we
torture PEBs before marking them as bad.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
When ubiformat prints something like
ubiformat: bad eraseblocks: 1400
it looks like there are 1400 bad eraseblock, although there is
only one with number 1400. Fix this but turning the print into
ubiformat: 1 bad eraseblock found, numbers: 1400
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Do not print extra newline if write fails, because mtd_write
prints a message and adds newline.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
When a PEB is marked as bad while we are formatting, ubiformat
prints 99% done at the end. Make it print 100% done instead.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
When fail to write to PEBs, and the error is EIO, torture the
PEB before marking it as bad. Basically, the code is copied
from the kernel UBI.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This patch fixes the following issue:
$ ubiformat /dev/mtd2 -e 0
ubiformat: error!: bad erase counter value: "0"
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This fixes the handling of total_bytes, avail_bytes and rsvd_bytes.
The result of the multiplication must be 64 Bit.
Signed-off-by: Detlef Bardtholdt <bardtholdt.detlef@ng-litef.de>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Not-so-old linux kernel like 2.6.29 do already have "/sys/class/mtd/mtdX"
directories, while very old kernels do not. But in 2.6.29 these
directories do not contain any information.
Anyway, the logic in libmtd which checked whether the system
supports sysfs was broken, because it assumed that old systems
do not even have "/sys/class/mtd/" directory.
Fix this problem by checking for "/sys/class/mtd/mtdX/name". If this
is present - the system really has sysfs support.
This patch also adds an extra print to libmtd.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This patch contains changes similar to the ones in the previous
patch.
Also, it changes all invocations of memset and makes sure
the argument is 0, not '\0', because memset expects int,
not char.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The memset is obviously wrong, and valgrind tells
use there are some uninitialised bytes used after read()
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Corentin Chary <corentincj@iksaif.net>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This large commit makes several things.
1. Switches libmtd to use the new sysfs interface
2. Implements new handy 'mtdinfo' utility
3. Does minore amendmends in libubi and some ubi-tools.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This is needed for io_paral test.
|
|
This is a prepearation to the coming sysfs interface support.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This is a preparation for the coming sysfs support.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This is a preparation for the coming sysfs support.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This is a preparation for the coming sysfs support.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Not sure why, but udevsettle does not work when threads are
used. In the io_paral test I experience the problem when
udevsettle opens UBI volumes and prevents tests to open
them (EBUSY is returned).
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
src/ubiformat.c: In function ‘main’:
src/ubiformat.c:741: error: too many arguments to function ‘libubi_open’
|
|
Improve comments about what is returned if UBI device or node
does not exist.
Better check for ENODEV error code.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Remove the not very nice @required parameter, and add a
possibility to distinguish between real errors and
a situation when UBI is not present.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Rename 'struct mtd_info' to 'struct mtd_dev_info' to reflect the
fact that it provides information about a specific MTD device.
Also, this is more consistent with libubi.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Rename 'mtd_get_info()' into 'mtd_get_dev_info()' to be consistent
to libubi.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Re-name the 'ubi_node_type()' function to a more meaningful name:
'ubi_probe_node()'.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Fix ubinfo utility and make it handle -d parameter correctly.
Without this patch it simple refuses working with -d.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The previous patch fixed a nasty bug, so it is nice to increase
program version to reflect that.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
ubiformat segfaults like this:
ubiformat: mtd0 (NAND), size 134217728 bytes (128.0 MiB), 16384 eraseblocks of 16384 bytes (16.0 KiB), min. I/O size 512 bytes
libscan: scanning eraseblock 8191 -- 100 % complete
ubiformat: 8190 eraseblocks have valid erase counter, mean value is 9
ubiformat: 2 eraseblocks are supposedly empty
ubiformat: warning!: VID header and data offsets on flash are 512 and 1024, which is different to calculated offsets 256 and 512
ubiformat: use new offsets 512 and 1024? (yes/no) no
Segmentation fault
The reason is that volume table size is calculated for 256/512
layout, and when user chooses 512/1024 - it is not re-calculated
which leads to segfault in 'ubigen_write_layout_vol()'.
This patch also fixes the message - in the above output new
offsets are 256/512, not 512/1024.
Also, this patch adds explicit printing of the selected
positions.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Remove the fd field from the mtd information data structure,
because libmtd does not really know the device node file name,
and serves only as a place to save the descriptor. The callers
should find a better place.
This patch improves code readability and prepares for further
changes.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
We know that sysfs is always at /sys, so we do not have to
store it in lib->sysfs.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
sysfs if guaranteed to be in /sys.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Just for the sake of being consistent with libubi, move the
comments for API functions to the header file.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
On nommu arch, local stack size is very limited and
can't be enlarged on demand. So, don't define large
array on local stack.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
|
|
Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Few minor amendments by Artem. And increase the utility
version number.
Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Move new-utils to ubi-utils and old ones to ubi-utils/old-utils.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Take the latest version from the kernel, where it was renamed
to ubi-media.h.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
When building with gcc security warnings enabled, the ubimirror.c code
triggers this warning:
./src/ubimirror.c: In function 'main':
./src/ubimirror.c:206: error: format not a string literal and no format arguments
Since the buffer in question should be a straight string anyways, avoid
ugly printf exploits by outputting the string indirectly:
printf("%s", buffer)
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
gcc-4.3.x introduces a number of new warnings (and we use -Werror) for
things like not checking scanf return values and not using explicit
formatting. Finally, it caught that we were overflowing our own buffer
in unubi.c, so increate the variable size as we want to declare and
clear PATH_MAX + 1, then use only PATH_MAX of the variable.
Signed-off-by: Tom Rini <trini@embeddedalley.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The UBI tools refuse to work with symlinks like
'/dev/ubi/bootloader -> ../ubi0_2' because they use 'lstat(2)' and get
information about the symlink but not about the device. This is
unwanted and fixed by this patch.
This patch renames 'struct stat stat' variables to 'st' to avoid
compilation errors.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
|
|
Somehow calling ubi_update_start was forgotten and caused the
tool not to write but silently ignore the write.
Signed-off-by: Frank Haverkamp <haver@vnet.ibm.com>
|
|
This commit adds compatible options to new ubimkvol, ubirmvol,
and ubiupdatevol and deletes corresponding old utilities.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|