aboutsummaryrefslogtreecommitdiff
path: root/ubi-utils/include
AgeCommit message (Collapse)Author
2012-08-23ubiattach: fail if kernel ignores max_beb_per1024Richard Genoud
If the kernel doesn't know the max_beb_per1024 parameter in the attach ioctl, but the call still succeeded ubi_attach and ubi_attach_mtd will return 1 instead of 0. In this case, the ubiattach command will detach the device and fail with an error message. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-23ubiattach: introduce max_beb_per1024 in UBI_IOCATTRichard Genoud
The ioctl UBI_IOCATT has been extended with max_beb_per1024 parameter. This parameter is used for adjusting the "maximum expected number of bad blocks per 1024 blocks" for each mtd device. The number of physical erase blocks (PEB) that UBI will reserve for bad block handling is now: whole_flash_chipset__PEB_number * max_beb_per1024 / 1024 This means that for a 4096 PEB NAND device with 3 MTD partitions: mtd0: 512 PEB mtd1: 1536 PEB mtd2: 2048 PEB the commands: ubiattach -m 0 -d 0 -b 20 /dev/ubi_ctrl ubiattach -m 1 -d 1 -b 20 /dev/ubi_ctrl ubiattach -m 2 -d 2 -b 20 /dev/ubi_ctrl will attach mtdx to UBIx and reserve: 80 PEB for bad block handling on UBI0 80 PEB for bad block handling on UBI1 80 PEB for bad block handling on UBI2 => for the whole device, 240 PEB will be reserved for bad block handling. This may seems a waste of space, but as far as the bad blocks can appear every where on a flash device, in the worst case scenario they can all appear in one MTD partition. So the maximum number of expected erase blocks given by the NAND manufacturer should be reserve on each MTD partition. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-23libubi: kill ubi_attach_mtdArtem Bityutskiy
The 'ubi_attach_mtd()' is not used and it is redundant now. 'ubi_attach()' function may be used instead. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-23libubi: factorize ubi_attach and ubi_attach_mtd codeRichard Genoud
The req->mtd_num value is now updated with the MTD device number found by mtd_node_to_num. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-22UBI: sync ubi-user.h with kernel v3.6-rc1Richard Genoud
Also remove the eraseblock type support, because kernel commit a65a0eb6d198e058687a9214683bd1c418f20d39 set the dtype parameter as obsolete. Also adjust to some renames: * 'UBI_PROP_DIRECT_WRITE' -> 'UBI_VOL_PROP_DIRECT_WRITE' * 'struct ubi_set_prop_req' -> 'struct ubi_set_vol_prop_req'. * 'UBI_IOCSETPROP' -> 'UBI_IOCSETVOLPROP' Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-01-27libubi: make `ubi_dev_present()' a library functionBrian Norris
We will use this function in ubinfo. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-08-20mkfs.ubifs/ubinize: increase PEB size limit to 2MiBViktar Palstsiuk
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
2011-06-27rewrite build system to avoid recursionMike Frysinger
The ubi-utils/src/ subdir is tossed as it just complicates things for no real gain. The dictionary.h header is relocated to the ubi-utils/include/ since other headers in there need it. The top level clean is replaced with a `find -delete` on objects, so it might prune more than necessary, but many projects now do this sort of thing and no one complained there. A "mkdep" helper generates the actual rule, and the variables are used with "foreach" to expand these automatically. The tests subdir is updated only to reflect the ubi-utils source move. Otherwise, it is left untouched as making that non-recursive isn't really worth the effort. While we're gutting things, also through in kbuild style output while building to make things more legible. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2010-07-17libs: remove ubiutils-specific stuff from common.hArtem Bityutskiy
Now include/common.h contains things that really everyone can use. And all the stuff specific to ubi-utils is in ubi-utils/include/ubiutils-common.h Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-13mtd-utils: move libmtd source files to lib/ subdirectoryKevin Cernekee
Source files for libmtd, crc32, and fec are scattered throughout the tree. Move them to a central location so they can be built into a common "libmtd.a" library used by all mtd-utils programs. This patch only renames/deletes files and does not change the content. Also modify the build system and source code so that libmtd.a can be built from a "common" location (lib/). Statically link all utilities at the top level with libmtd.a . Minor changes to mkfs.ubifs to allow using the common crc32 implementation. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-utils: harmonize mtd device node variablesArtem Bityutskiy
Consistently use 'mtd_dev_node' to name variables consining MTD device node path. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-utils: harmonize libmtd interface a bitArtem Bityutskiy
Let's consistently use 'mtd_num' name for MTD device number. At the moment some code uses 'mtd_num', other 'dev_num'. Harmonize that. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libubigen: make init_vid_hdr externally visibleArtem Bityutskiy
ubi-tests need it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libubigen: move header commentsArtem Bityutskiy
To be consistent with other ubi libraries, move header comments to the .h file. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libmtd: add mtd_write_imgArtem Bityutskiy
Add another helper interface which can be used to write an image to an mtd device. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libubi: provide mtd number in UBI device informationArtem Bityutskiy
Add an 'mtd_num' field to the UBI device information structure. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libubi: remove few fields from volume infoArtem Bityutskiy
Remove the 'dev_major' and 'dev_minor' fields from the volume information structure, because these fields should be provided by the device information structure. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-02-18libubi: add support to attach/detach by MTD device pathMika Westerberg
struct ubi_attach_request now has additional field 'dev' that can contain path to the MTD device node in the filesystem. Also there are two new functions that are able to handle path to the MTD device node: ubi_attach() - attach MTD device by number or by path ubi_detach() - detach MTD device by path ubi_attach() works like ubi_attach_mtd() when it is passed empty req->dev, otherwise it looks up correct MTD device number based on the given device node path. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubinize: add sequence number supportArtem Bityutskiy
UBI now supports the image sequence number feature which prevents UBI from mistakingly accepting half-written images, if the image was written on top of an older image. Support this feature in ubinize and make it pick a random number for the UBI image sequence number. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: torture eraseblocks on write errorsArtem Bityutskiy
When fail to write to PEBs, and the error is EIO, torture the PEB before marking it as bad. Basically, the code is copied from the kernel UBI. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-11libubi: add ubi_is_mapped() functionCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-11ubi-utils: add sysfs interface support and new toolArtem Bityutskiy
This large commit makes several things. 1. Switches libmtd to use the new sysfs interface 2. Implements new handy 'mtdinfo' utility 3. Does minore amendmends in libubi and some ubi-tools. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libubi: add ubi_leb_unmap interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libubi: add ubi_set_property interfaceArtem Bityutskiy
This is needed for io_paral test.
2009-05-08libmtd: make type_str to be an arrayArtem Bityutskiy
This is a prepearation to the coming sysfs interface support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libmtd: rename num fieldArtem Bityutskiy
This is a preparation for the coming sysfs support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libmtd: rename rdonly fieldArtem Bityutskiy
This is a preparation for the coming sysfs support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libmtd: rename allows_bb fieldArtem Bityutskiy
This is a preparation for the coming sysfs support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libubigen: add missing includeArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-22libubi: improve errors handlingArtem Bityutskiy
Improve comments about what is returned if UBI device or node does not exist. Better check for ENODEV error code. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-22libubi: improve libubi_open interfaceArtem Bityutskiy
Remove the not very nice @required parameter, and add a possibility to distinguish between real errors and a situation when UBI is not present. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-20libmtd: rename mtd_infoArtem Bityutskiy
Rename 'struct mtd_info' to 'struct mtd_dev_info' to reflect the fact that it provides information about a specific MTD device. Also, this is more consistent with libubi. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-20libmtd: rename mtd_get_infoArtem Bityutskiy
Rename 'mtd_get_info()' into 'mtd_get_dev_info()' to be consistent to libubi. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-20ubi-utils: rename ubi_node_typeArtem Bityutskiy
Re-name the 'ubi_node_type()' function to a more meaningful name: 'ubi_probe_node()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-18libmtd: amend interfaceArtem Bityutskiy
Remove the fd field from the mtd information data structure, because libmtd does not really know the device node file name, and serves only as a place to save the descriptor. The callers should find a better place. This patch improves code readability and prepares for further changes. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-18libubi: spelling fixesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-18libmtd: move comments to headersArtem Bityutskiy
Just for the sake of being consistent with libubi, move the comments for API functions to the header file. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-03-26ubiformat: mark faulty blocks as badRoger Quadros
Few minor amendments by Artem. And increase the utility version number. Signed-off-by: Roger Quadros <ext-roger.quadros@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-03-17ubi-utils: re-arrange directory layoutArtem Bityutskiy
Move new-utils to ubi-utils and old ones to ubi-utils/old-utils. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-02-19Revert ubi-tools changesArtem Bityutskiy
Restore ubi tools to their "original" state, which means to the state they were before I stareted cleaning them up. Instead, create a "new-utils" subdirectory and move my work there. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25ubi-utils: use mtd_swab.hArtem Bityutskiy
Do not relay on asm/byteorder and use mtd_swab.h instead Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25libubi: fix commentArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25libubi: support atomic LEB change ioctlArtem Bityutskiy
And add testing for this feature. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25ubi-utils: remove unneeded includeArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-25ubi-tools: fix compilation problemsArtem Bityutskiy
It appears that older system do not expose __be32 and friends to userspace, so use uint32_t and friends. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-24ubinize: add autoresize flag supportArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2008-01-23ubi-utils: remove all old toolsArtem Bityutskiy
Remove all old tools because I cannot maintain them and the original authors do not seem to have time for this. Some of the tools do not work properly, some are just vague and undocumented and seem to be oriented to the environment of the IBM guys. Nevertheless, I'll return the tool as is in the next commit, becouse they are still useful. This commit also adds a ubinize utility to generate UBI images. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-26 10:53:09 +0000