summaryrefslogtreecommitdiff
path: root/tests
AgeCommit message (Collapse)Author
2012-08-23ubiattach: introduce max_beb_per1024 in UBI_IOCATTRichard Genoud
The ioctl UBI_IOCATT has been extended with max_beb_per1024 parameter. This parameter is used for adjusting the "maximum expected number of bad blocks per 1024 blocks" for each mtd device. The number of physical erase blocks (PEB) that UBI will reserve for bad block handling is now: whole_flash_chipset__PEB_number * max_beb_per1024 / 1024 This means that for a 4096 PEB NAND device with 3 MTD partitions: mtd0: 512 PEB mtd1: 1536 PEB mtd2: 2048 PEB the commands: ubiattach -m 0 -d 0 -b 20 /dev/ubi_ctrl ubiattach -m 1 -d 1 -b 20 /dev/ubi_ctrl ubiattach -m 2 -d 2 -b 20 /dev/ubi_ctrl will attach mtdx to UBIx and reserve: 80 PEB for bad block handling on UBI0 80 PEB for bad block handling on UBI1 80 PEB for bad block handling on UBI2 => for the whole device, 240 PEB will be reserved for bad block handling. This may seems a waste of space, but as far as the bad blocks can appear every where on a flash device, in the worst case scenario they can all appear in one MTD partition. So the maximum number of expected erase blocks given by the NAND manufacturer should be reserve on each MTD partition. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-22UBI: sync ubi-user.h with kernel v3.6-rc1Richard Genoud
Also remove the eraseblock type support, because kernel commit a65a0eb6d198e058687a9214683bd1c418f20d39 set the dtype parameter as obsolete. Also adjust to some renames: * 'UBI_PROP_DIRECT_WRITE' -> 'UBI_VOL_PROP_DIRECT_WRITE' * 'struct ubi_set_prop_req' -> 'struct ubi_set_vol_prop_req'. * 'UBI_IOCSETPROP' -> 'UBI_IOCSETVOLPROP' Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: remove a warningArtem Bityutskiy
If /proc/mtd does not exist, we have this warning: grep: /proc/mtd: No such file or directory Get rid of this. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: add mtdram testsArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: support testing without sub-pagesArtem Bityutskiy
Run the tests with VID header at the second page as well for better coverage. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: develop the test furtherArtem Bityutskiy
Add a lot of test passes on nandsim with different geometry. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03runtests.sh: print more consistent messagesArtem Bityutskiy
On success we print "SUCCESS", lets print "FAILURE" on failure. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: do not use pipe unnecessarilyArtem Bityutskiy
Use 'grep patt file' instead of cat file | grep patt. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-02tests: ubi: add stress-test.shArtem Bityutskiy
It is not finished yet, but it will run all tests on nandsim and mtdram of different geometry. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-02tests: ubi: clean-up runtests.sh some moreArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-02tests: ubi: clean-up the runtests.sh scriptArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-10-14tests: checkfs: remove unused codeAndy Shevchenko
There are two variables which are not used anymore. Thos patch removes useless lines and suppresses gcc warnings. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-23mtd-utils: use __func__ instead of __FUNCTION__Brian Norris
__func__ is more portable Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-06-29mtd-utils: update .gitignore filesBrian Norris
First, the top-level Makefile should not tell git to ignore sub-level .gitignore files. Second, add simple .gitignores to ignore the executables generated under the various `tests' subdirectories. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-utils: remove whitespace at end of linesBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-tests: io_paral: build error, "variable length strings"Brian Norris
Some compilers will complain about use of strlen() within a static array size declaration. For this type of string, "sizeof() - 1" is equivalent and prevents the build error. Error: io_paral.c:48:13: error: variably modified 'vol_nodes' at file scope Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-tests: checkfs: fix size_t related warningBrian Norris
Depending on your compiler, size_t may or may not be long unsigned int. Use printf's %zu format to clarify. Warning message: checkfs.c:524:28: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int' Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-27rewrite build system to avoid recursionMike Frysinger
The ubi-utils/src/ subdir is tossed as it just complicates things for no real gain. The dictionary.h header is relocated to the ubi-utils/include/ since other headers in there need it. The top level clean is replaced with a `find -delete` on objects, so it might prune more than necessary, but many projects now do this sort of thing and no one complained there. A "mkdep" helper generates the actual rule, and the variables are used with "foreach" to expand these automatically. The tests subdir is updated only to reflect the ubi-utils source move. Otherwise, it is left untouched as making that non-recursive isn't really worth the effort. While we're gutting things, also through in kbuild style output while building to make things more legible. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-25integck: fix build error (MS_DIRSYNC, MS_RELATIME)Brian Norris
Need to include <linux/fs.h>, at least for my build system. Otherwise, you can't build the 'tests'. integck.c: In function ‘parse_mount_options’: integck.c:2862: error: ‘MS_DIRSYNC’ undeclared (first use in this function) integck.c:2862: error: (Each undeclared identifier is reported only once integck.c:2862: error: for each function it appears in.) integck.c:2872: error: ‘MS_RELATIME’ undeclared (first use in this function) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: add some more error messagesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: print error message on errorArtem Bityutskiy
Currently pcv macro print the error message only if we are not doing power cut testing or if we have -v flag. But if we run without -v and an error happen and the error code is not EROFS/EIO, pcv() does not print anything. This patch makes it print the error message in that case as well. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: close files after creationArtem Bityutskiy
The 'file_new()' function should create a file but should not keep it open. There is a different path to open files and keep them open. This patch makes 'file_new()' close newly created files. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: make directory checking workArtem Bityutskiy
This patch makes the directory checking in case of power cut emulation actually work. There were many bugs. Basically, we cannot rely on anything unless the directory is marked as clean. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: add verbose reportingArtem Bityutskiy
Make -v switch control verbose integck output. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: always check clean dataArtem Bityutskiy
Check the clean data after every emulated power cut, not only when 'create_test_data()'/'update_test_data()' succeed. This required some minor re-work. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: introduce a helper function for dir syncArtem Bityutskiy
Add a helper 'sync_directory()' function to synchronize directories. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: print name of directory which we cannot openArtem Bityutskiy
In 'dir_check()' print name of the directory if we fail to open it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: EIO can also be return in power-cut testingArtem Bityutskiy
Currently when we are doing UBIFS power cut emulation testing we assume that EROFS is returned in case of an emulated power cut event. However, this is not true and sometimes Linux returns EIO to user-space instead. Namely, this happens when we are waiting for write-back to finish. Here is a call trace form kernel 2.6.39-rc7: Call Trace: [<ffffffff810aaa77>] filemap_write_and_wait_range+0x78/0xb1 [<ffffffff8110f34d>] vfs_fsync_range+0x38/0xd3 [<ffffffff8110f42b>] generic_write_sync+0x43/0x65 [<ffffffff810ab0c9>] generic_file_aio_write+0xaa/0xf2 [<ffffffffa02224c9>] ubifs_aio_write+0x13a/0x1a1 [ubifs] [<ffffffff810ed71f>] do_sync_write+0xcb/0x141 [<ffffffff810ee016>] vfs_write+0xb0/0x150 [<ffffffff810ee175>] sys_write+0x48/0x72 [<ffffffff813e0692>] system_call_fastpath+0x16/0x1b 'filemap_fdatawait_range()' returns hard-coded -EIO if a page write-back happens with whatever error code. Thus, this patch teaches integck to handle EIO when doing power cut emulation testing. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: implement MTD reattachingArtem Bityutskiy
This patch adds -m <mtdnum> option to integck and teaches integck to re-attach the MTD device to UBI in case of an emulated power cut event. This is needed for the new UBI power cut and unstable bits emulation infrastructure: when UBI emulates a power cut the only way to recover form this is to re-attach the MTD device. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: read all files in power cut modeArtem Bityutskiy
When we are in power cut mode read all files after re-mounting. This will check that FS recovery worked well and all files are readable after recovery. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: verify truncation only if -v option was givenArtem Bityutskiy
Currently we always verify holes when truncating, but we have -v switch for this and should do this only if -v was given. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: fsync directories as wellArtem Bityutskiy
Call 'fsync()' for directories sometimes as well, and check synchronized directories after re-mount - cound of directory entries has to be correct. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: return error if fsync failsArtem Bityutskiy
If 'fsync()' or 'fdatasync()' fail we have to return an error, but we by mistake were returning 0 (success). Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: fsync more oftenArtem Bityutskiy
Currently integck calls 'fsync()' very rarely - with 0.1% probability. Make this happen more often - with 1% probability. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: verify clean filesArtem Bityutskiy
Allow verification for clean files, i.e. the files which had been fsync()'ed before the emulated power cut happened. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: make -v work -eArtem Bityutskiy
Make the verify option -v work with power cut emulation option -e. We can verify all operations except of writing to the file, because of write-back. Indeed, even if we write successfully, the pages may still be in the page-cache and if an emulated power cut happens they will be dropped, and our verification will fail. I am not 100% sure it is save to verify non-write operation in other FSes, but only UBIFS has power cut emulation mode now, so we do not really care about other FSes at this point. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: check direntries in power cut modeArtem Bityutskiy
Enable directory entry checking in power cut mode. This means that with this patch integck will check that all directory entries in the file-system were created by integck. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: check errno in pvc macroArtem Bityutskiy
All errors but write errors have corresponding CHECK(), so if something gets wrong we fail. But in case of I/O errors we do not fail if an unexpected error happens, which makes it difficult to trace issues. Inject the errno checking to the pvc macro to make sure we fail if errno is not EROFS. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: fix segfaultArtem Bityutskiy
Commit 1394a46213e8180e1233ca6d4811e7c77d49b1e0 was a good idea, but it introduced a segfault - files can be unlinked and 'file->links' is NULL, it is bad idea to unconditionally dereference it with 'file->links->name'. This patch introduces a helper function which takes care of the situation with unlinked files, plus it adds few assertions. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: introduce the clean flagArtem Bityutskiy
Introduce per-file "clean" flag which tells whether the file is synchronized or not. This flag is not really used so far. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-29fs-tests: integck: print error number in pcv messagesArtem Bityutskiy
In pcv() messages also print the error number - this is useful when an error happens and it is not because of EROFS. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-29fs-tests: integck: re-structure file_write a littleArtem Bityutskiy
This is just a preparation - re-structure 'file_write()' to make one "success" return point - we'll add synchronization stuff there. Also, while on it, make it delete the file errored in truncation, not only in write. Also, move the fsync() call to this function because it is common to all write paths. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-29fs-tests: integck: limit the recursion depthArtem Bityutskiy
I observes segfaults in integck test, and unfortunately I do not have the core file to investigate the problem. But I see one possibility for the test to segfault - it has unbounded recursion. Limit the maximum recursion depth. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-29fs-tests: integck: fail loudly on unexpected EROFSArtem Bityutskiy
If we are not in power cut testing mode (-p was not used) and we get an unexpected EROFS, we silently exit. This patch fixes this behavior and make the test loudly fail instead. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-25fs-tests: integck: fix falures with SIGBUSArtem Bityutskiy
The test sometimes dies due to SIGBUS because a power cut event happens when we are writing to an mmap()'ed area. SIGBUS is very difficult to ignore, so fix the issue simply by avoiding doing 'mmap()' operations when in power cut testing mode. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-25fs-tests: integck: ignore -e if in power cut modeArtem Bityutskiy
Similarly to the previous commit, do not verify operations when in power-cut testing mode. Again, this is because write-back may fail meanwhile. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-25fs-tests: integck: fix line number in CHECK() outputArtem Bityutskiy
In 'check_failed()' use the file and line number provided by the CHECK() macro via the function parameters, rather than using __LINE__ directly. Otherwise the funtion prints its own line, instead of the line where the CHECK() failed. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-25fs-tests: integck: do not run checking when in power cut modeArtem Bityutskiy
Do not check the file-system when we are in power cut mode. Currently we still check the FS if we did not encounter any error, and the test fails sometimes because meanwhile write-back encounters an error and drops pages. Disable the checking so far. It should be enabled when we implement the 'clean' flag for files. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-25fs-tests: integck: introduce a helper for checkingArtem Bityutskiy
Introduce a 'check_tested_fs()' helper function. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-24fs-tests: integck: print a bit less if in power cut modeArtem Bityutskiy
Do not print extra messages when unable to re-mount - they are already printed by the recover function. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-04 09:42:04 +0000