Age | Commit message (Collapse) | Author |
|
Sorry, the commit is huge, I just did not have time to split it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
... to avoid confusion when the local common.h shadows the top-level common.h.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
This will not compile for me (due to bit rot?). Maybe the program is
never used?
Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
We should use the off_t type instead of off64_t or u_int32_t as its
length is controlled by the WITHOUT_LARGEFILE flag.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
There's a typo in lseek parameters order.
But, due to the value of SEEK_SET, this commit doesn't introduce a
change.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
The ioctl UBI_IOCATT has been extended with max_beb_per1024 parameter.
This parameter is used for adjusting the "maximum expected number of
bad blocks per 1024 blocks" for each mtd device.
The number of physical erase blocks (PEB) that UBI will reserve for bad
block handling is now:
whole_flash_chipset__PEB_number * max_beb_per1024 / 1024
This means that for a 4096 PEB NAND device with 3 MTD partitions:
mtd0: 512 PEB
mtd1: 1536 PEB
mtd2: 2048 PEB
the commands:
ubiattach -m 0 -d 0 -b 20 /dev/ubi_ctrl
ubiattach -m 1 -d 1 -b 20 /dev/ubi_ctrl
ubiattach -m 2 -d 2 -b 20 /dev/ubi_ctrl
will attach mtdx to UBIx and reserve:
80 PEB for bad block handling on UBI0
80 PEB for bad block handling on UBI1
80 PEB for bad block handling on UBI2
=> for the whole device, 240 PEB will be reserved for bad block
handling.
This may seems a waste of space, but as far as the bad blocks can appear
every where on a flash device, in the worst case scenario they can
all appear in one MTD partition.
So the maximum number of expected erase blocks given by the NAND
manufacturer should be reserve on each MTD partition.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Also remove the eraseblock type support, because kernel commit
a65a0eb6d198e058687a9214683bd1c418f20d39 set the dtype
parameter as obsolete.
Also adjust to some renames:
* 'UBI_PROP_DIRECT_WRITE' -> 'UBI_VOL_PROP_DIRECT_WRITE'
* 'struct ubi_set_prop_req' -> 'struct ubi_set_vol_prop_req'.
* 'UBI_IOCSETPROP' -> 'UBI_IOCSETVOLPROP'
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
If /proc/mtd does not exist, we have this warning:
grep: /proc/mtd: No such file or directory
Get rid of this.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Run the tests with VID header at the second page as well for better coverage.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Add a lot of test passes on nandsim with different geometry.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
On success we print "SUCCESS", lets print "FAILURE" on failure.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Use 'grep patt file' instead of cat file | grep patt.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
It is not finished yet, but it will run all tests on nandsim and mtdram
of different geometry.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
There are two variables which are not used anymore. Thos patch removes useless
lines and suppresses gcc warnings.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
__func__ is more portable
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
First, the top-level Makefile should not tell git to ignore sub-level
.gitignore files.
Second, add simple .gitignores to ignore the executables generated under
the various `tests' subdirectories.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Some compilers will complain about use of strlen() within a static array
size declaration. For this type of string, "sizeof() - 1" is equivalent
and prevents the build error.
Error:
io_paral.c:48:13: error: variably modified 'vol_nodes' at file scope
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Depending on your compiler, size_t may or may not be long unsigned int.
Use printf's %zu format to clarify.
Warning message:
checkfs.c:524:28: warning: format '%lu' expects type
'long unsigned int', but argument 2 has type 'unsigned int'
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
The ubi-utils/src/ subdir is tossed as it just complicates things for no
real gain. The dictionary.h header is relocated to the ubi-utils/include/
since other headers in there need it.
The top level clean is replaced with a `find -delete` on objects, so it
might prune more than necessary, but many projects now do this sort of
thing and no one complained there.
A "mkdep" helper generates the actual rule, and the variables are used
with "foreach" to expand these automatically.
The tests subdir is updated only to reflect the ubi-utils source move.
Otherwise, it is left untouched as making that non-recursive isn't really
worth the effort.
While we're gutting things, also through in kbuild style output while
building to make things more legible.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Need to include <linux/fs.h>, at least for my build system. Otherwise,
you can't build the 'tests'.
integck.c: In function ‘parse_mount_options’:
integck.c:2862: error: ‘MS_DIRSYNC’ undeclared (first use in this
function)
integck.c:2862: error: (Each undeclared identifier is reported only once
integck.c:2862: error: for each function it appears in.)
integck.c:2872: error: ‘MS_RELATIME’ undeclared (first use in this
function)
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Currently pcv macro print the error message only if we are not doing power cut
testing or if we have -v flag. But if we run without -v and an error happen
and the error code is not EROFS/EIO, pcv() does not print anything. This patch
makes it print the error message in that case as well.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The 'file_new()' function should create a file but should not keep it
open. There is a different path to open files and keep them open. This
patch makes 'file_new()' close newly created files.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This patch makes the directory checking in case of power cut emulation
actually work. There were many bugs. Basically, we cannot rely on anything
unless the directory is marked as clean.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Make -v switch control verbose integck output.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Check the clean data after every emulated power cut, not only when
'create_test_data()'/'update_test_data()' succeed. This required some minor
re-work.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Add a helper 'sync_directory()' function to synchronize directories.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
In 'dir_check()' print name of the directory if we fail to open it.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Currently when we are doing UBIFS power cut emulation testing we assume that
EROFS is returned in case of an emulated power cut event. However, this is
not true and sometimes Linux returns EIO to user-space instead. Namely, this
happens when we are waiting for write-back to finish. Here is a call trace
form kernel 2.6.39-rc7:
Call Trace:
[<ffffffff810aaa77>] filemap_write_and_wait_range+0x78/0xb1
[<ffffffff8110f34d>] vfs_fsync_range+0x38/0xd3
[<ffffffff8110f42b>] generic_write_sync+0x43/0x65
[<ffffffff810ab0c9>] generic_file_aio_write+0xaa/0xf2
[<ffffffffa02224c9>] ubifs_aio_write+0x13a/0x1a1 [ubifs]
[<ffffffff810ed71f>] do_sync_write+0xcb/0x141
[<ffffffff810ee016>] vfs_write+0xb0/0x150
[<ffffffff810ee175>] sys_write+0x48/0x72
[<ffffffff813e0692>] system_call_fastpath+0x16/0x1b
'filemap_fdatawait_range()' returns hard-coded -EIO if a page write-back
happens with whatever error code.
Thus, this patch teaches integck to handle EIO when doing power cut emulation
testing.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This patch adds -m <mtdnum> option to integck and teaches integck to re-attach
the MTD device to UBI in case of an emulated power cut event. This is needed
for the new UBI power cut and unstable bits emulation infrastructure: when UBI
emulates a power cut the only way to recover form this is to re-attach the MTD
device.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
When we are in power cut mode read all files after re-mounting. This will
check that FS recovery worked well and all files are readable after recovery.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Currently we always verify holes when truncating, but we have -v switch for
this and should do this only if -v was given.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Call 'fsync()' for directories sometimes as well, and check synchronized
directories after re-mount - cound of directory entries has to be correct.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
If 'fsync()' or 'fdatasync()' fail we have to return an error, but we by
mistake were returning 0 (success).
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Currently integck calls 'fsync()' very rarely - with 0.1% probability. Make
this happen more often - with 1% probability.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Allow verification for clean files, i.e. the files which had been fsync()'ed
before the emulated power cut happened.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Make the verify option -v work with power cut emulation option -e. We can
verify all operations except of writing to the file, because of write-back.
Indeed, even if we write successfully, the pages may still be in the page-cache
and if an emulated power cut happens they will be dropped, and our verification
will fail.
I am not 100% sure it is save to verify non-write operation in other FSes, but
only UBIFS has power cut emulation mode now, so we do not really care about
other FSes at this point.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Enable directory entry checking in power cut mode. This means that with this
patch integck will check that all directory entries in the file-system were
created by integck.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
All errors but write errors have corresponding CHECK(), so if something
gets wrong we fail. But in case of I/O errors we do not fail if an
unexpected error happens, which makes it difficult to trace issues.
Inject the errno checking to the pvc macro to make sure we fail if
errno is not EROFS.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Commit 1394a46213e8180e1233ca6d4811e7c77d49b1e0 was a good idea, but it
introduced a segfault - files can be unlinked and 'file->links' is NULL, it is
bad idea to unconditionally dereference it with 'file->links->name'. This patch
introduces a helper function which takes care of the situation with unlinked
files, plus it adds few assertions.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Introduce per-file "clean" flag which tells whether the file is synchronized or
not. This flag is not really used so far.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
In pcv() messages also print the error number - this is useful when
an error happens and it is not because of EROFS.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This is just a preparation - re-structure 'file_write()' to make one "success"
return point - we'll add synchronization stuff there. Also, while on it, make
it delete the file errored in truncation, not only in write. Also, move
the fsync() call to this function because it is common to all write paths.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
I observes segfaults in integck test, and unfortunately I do not have the core
file to investigate the problem. But I see one possibility for the test to
segfault - it has unbounded recursion. Limit the maximum recursion depth.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
If we are not in power cut testing mode (-p was not used) and we get an
unexpected EROFS, we silently exit. This patch fixes this behavior and make
the test loudly fail instead.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The test sometimes dies due to SIGBUS because a power cut event happens when
we are writing to an mmap()'ed area. SIGBUS is very difficult to ignore, so
fix the issue simply by avoiding doing 'mmap()' operations when in power cut
testing mode.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|