| Age | Commit message (Collapse) | Author |
|---|
|
Forbid the use of less than 2 eraseblocks in nandpagetest. It is obvious
that the test cannot run on zero block, but it cannot run on only one
block neither. The reason is: get_first_and_last_block() will return the
same id for both the first and the last blocks. In erasecrosstest(),
the logic is:
- erase/write/read/verify first block
- erase/write again first block
- erase *last* block
- read/verify first block
When using only one block, 'first' refers to the same block as 'last',
leading to erasing the block before reading it. Hence, the test would
fail with no actual reason.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Bit flip detection for written and erased pages tend to have different
implementations. Where written pages are detected and corrected using
ECC, erased pages are typically detected by ensuring that the number of
zeros is less than a specified threshold.
As such, it's necessary to have the 'nandbiterrs' test support the
testing of written and erased pages. Bit flips in erased pages are
emulated by rewriting the page in raw mode, to prevent the use of ECC.
Signed-off-by: Harpreet Eli Sangha <harpreet@nestlabs.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This patch eliminates warnings generated by the -Wmissing-prototypes
option. With this flag set, we are now forced to have prototypes for
all global, exported functions, that have to be made visible to the
definitions and we are forced to mark all local functions as static.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
AC_CHECK_HEADERS already makes sure our config header contains a
HAVE_$FOO_H macro if a header was found. There is no need to
awkwardly set our own Automake conditionals and check for it all
over the place in the Automake files.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
After a page read, the old failure statistics are compared against the
new failure statistics before the new values are actually read.
Signed-off-by: Harpreet "Eli" Sangha <harpreet@nestlabs.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The tools in question will quit with an exit code 0 if the command
line option was not recognized. By returning an error code a calling
script has the possibility to distinguish between a real success and
an invalid invocation.
We need to return -1 instead of EXIT_FAILURE to be consistent with the
other exit code places.
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
rand() is not thread safe, but glibc seems to use a shared state which is
protected by a mutex. io_paral spawns a few threads and they call rand()
more or less in parallel, which causes heavy lock contention. That
makes the test extremely slow on some setups.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
io_read and io_update of mtd-utils support NAND with 4k page size only.
Increase that to support up to 65k page size.
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
io_read and io_update of mtd-utils use variable-length arrays for test data.
Since this could result in allocating many megabytes using alloca(), switch
to malloc().
Signed-off-by: David Gstir <david@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
UDEV_SETTLE_HACK addresses a problem which does no longer exist on Linux.
These days we have devtmpfs. New devices will automatically created on
the kernel side and user space has no longer to wait for udev.
As udev has a hard dependency on devtmpfs we can depend on it too.
People which don't use udev nor plain devtmpfs are anyways on their own.
Android, I'm looking at you...
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
On 32bit systems (e.g. ARM) the size of off_t can be 4 byte and the size of loff_t 8 byte.
This causes compiler warnings like the following:
flash_erase.c: In function 'show_progress':
flash_erase.c:56:22: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'off_t {aka long int}' [-Wformat=]
bareverbose(!quiet, "\rErasing %d Kibyte @ %"PRIxoff_t" -- %2i %% complete ",
and an output like this:
~# flash_erase /dev/mtd2 0 1
Erasing 64 Kibyte @ 6400000000 -- 0 % complete
~#
Since the size of off_t and loff_t can differ from each other, the
printf format specifier should be determined separately for both.
Further the format specifiers should be based directly on the size of the
particular data type.
Signed-off-by: Torsten Fleischer <torfl6749@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Previously, the unit test sysfs mock files and headers were not
added to the distribution packag. Not packaging the header leads
to compilation of the unit tests failing. Not packaging the stub
files caueses the unit tests themselves to fail.
This patch explicitly adds the header and sysfs mock files to the
distribution target, allowing the unit tests to be used outside
the git tree.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Several tools are simply not checking return code of functions marked
with 'warn_unused_result'.
Provide wrappers for the read/write functions to avoid patching old
code and providing proper error handling.
Fix the remaining ones (calls to fgets() and system()).
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
|
Historically, the mtd-utils and ubi-utils were seperate packages. The
ubi-utils were at some point merged into the mtd-utils. They first
appeared in the release tar-ball in version 1.1.0 in their own
sub-hirarchy with their own buildsystem, readme, documentation, etc.
A lot of the duplicated stuff got centralized/removed over time.
This patch further cleans up the directory hirarchy duplication by
moving common libraries from the ubi-utils/ into the central lib/
and include/ directories in the top directory of the mtd-utils package.
This includes:
- libuib.a & libubigen.a used by the ubi utilities
- libscan.a currently only used by ubiformat
- libiniparser.a used by ubinize
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add unittests for most functions provided by
libubi
Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
|
|
unit tests for most functions provided by
libmtd.
Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
|
|
add mocked sysfs used by libmtd and libubi
unittests
Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
|
|
Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
|
|
Basically a user space port of the mtd sub page test kernel module.
In addition to the module parameters, the utility supports using
only a sub-range of the flash erase blocks with a configurable
stride and can restore the block contents after the test.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd page test kernel module.
In addition to the module parameters, the utility supports using
only a sub-range of the flash erase blocks with a configurable stride.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd read test kernel module.
In addition to the module parameters, the utility can scan only
a sub-range of the flash erase block with a configurable stride.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd speed test kernel module.
In addition to the module parameters, the utility can resture
the block contents after test and allows setting the maxium writes
for the test.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd speed test kernel module.
In addition to the block offset and count module parameters, the
utility supports a block stride and can restore the block contents
after test. Furthermore, a flag can be used to disable destructive
tests (i.e. only perform read speed tests).
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd stress test kernel module.
In addition to the block offset and count module parameters, the
utility supports a block stride and can restore the block contents
after test.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd torture test kernel module. In
addition to the block offset and count module parameters, the utility
supports a block stride and can restore the block contents after test.
In contrast to the kernel module, the torture test is implemented by
the libmtd mtd_toruture function and thus doesn't allow for similarly
fine grained options on diagnostics.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This patch adds a libmissing library to mtd-utils, containing
implementations of functionality found in glibc but typically
missing from embedded C libraries such as uclibc ot musl.
For now, the library only contains stub implementations of
the backtrace*() family of functions.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
When a program does sophisticated enough command line processing
(i.e. getopt), make sure it responds to -V and --version.
When a program prints a version string, make sure it uses the
common_print_version macro to print out its name, that it is part
of mtd-utils and the mtd-utils version from the build system in a
fashion similar to common program packages like the GNU coreutils.
When a program responds to -V/--version or -h/--help, make sure it
reports success exit status.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Add automake files for the test binaries. If configured to do so,
install the test binaries to libexec/mtd-utils and use autoconf to
fix the paths in the test scripts.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This patch is largely based on Richards original RFC.
The major differences to the RFC patch are:
- Add missing sumtools & mtdpart targets
- Fix name of mkfs.jffs2 target
- Add missing subdir-objects option for non-recursive make
- Move all automake options to configure.ac
- Add manpages to install target
- Make XATTR & LZO support configurable
- Install binaries to sbin directory like in the old build system
- Install flash_erase wrapper script
- Add files missing from distribution target
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Some of the programs in the mtd-utils used to be seperate packages that
were at some point merged into mtd-utils. As a result, some subdirectories
contain their own README and COPYING files with copies of the GPLv2
license text.
Since those programs are now part of mtd-utils that contains a copy of the
GPLv2 in the file COPYING in the package root directory, those extra files
can be removed, as there is no need for distributing an extra copy of the
license text for each individual program in the bundle.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
In commit ca7a5eda221d("integck.c: Fix buffer overflow in save_file")
we started including header <bits/stdio_lim.h>.
But with musl C library, we get following build error
integck.c:37:28: fatal error: bits/stdio_lim.h: No such file or directory
#include <bits/stdio_lim.h>
^
compilation terminated.
make[2]: *** [integck] Error 1
Header <bits/stdio_lim.h> is not available in musl C library. However
<stdio.h> has all definition that <bits/stdio_lim.h> supposed to be
providing. Moreover <bits/stdio_lim.h> shouldn't be included directly
instead we should be using <stdio.h>.
Since we already include <stdio.h> and in case of uClibc or glibc
<bits/stdio_lim.h> gets included internally, we can safely remove it.
This build issue is found by Buildroot autobuilder
http://autobuild.buildroot.net/results/175/1754861457af520480cc34d7d2d0edff2868ff66/
Fixes: ca7a5eda221d("integck.c: Fix buffer overflow in save_file")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The calculation of the CRC in /tests/checkfs/makefiles.c was writing the CRC
Into the produced files in host byte-order which would cause CRC validation
to fail on big-endian systems as the validation is performed bytewise.
Signed-off-by: Paul McGougan <pmcgougan AT topcon.com>
[Brian: add endian.h]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Test integck requires a parameter but run_all.sh did no pass any to it.
Then:
integck: error!: test file-system was not specified (use -h for help)
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Not using the macros may be a problem when cross-compiling.
Signed-off-by: Mats Karrman <mats.karrman@tritech.se>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
In the problem above I've spend several hours waiting for the issue to
appear, only to had the 'luck' that it was found in a file whose name was
256 bytes in length, resulting in the write to fail. Closer examination
showed that the buffer to store the path was 256 bytes in length, but this
buffer also includes /tmp and the read/write suffix and should be able to
contain a filename which is up to 255 bytes (NAME_MAX in linux/limits.h)
in size which is a bad fit. So that array is modified to FILENAME_MAX
(stdio_lim.h) and some checking is added to truncate the filename should
it cause an overflow.
The following log shows the first patch in action (see the correct seed),
and shows why this third patch is needed:
<quote>
integck: File Data:
integck: Offset: 0 Size: 1 Seed: 5008310 R.Off: 0
integck: 1 writes
integck: ============================================
integck: Write Info:
integck: Offset: 0 Size: 1 Seed: 5008310 R.Off: 0
integck: Offset: 0 Size: 1 Seed: 8246352 R.Off: 0
integck: Offset: 0 Size: 1 Seed: 5078796 R.Off: 0
integck: Offset: 0 Size: 1 Seed: 2267087 R.Off: 0
integck: Offset: 0 Size: 1 Seed: 3602680 R.Off: 0
integck: 5 writes or truncations
integck: ============================================
integck: Saving /tmp/yqcnfygfitaatyeyvffrguegcdttamcnyhowhgieljfuxfipiljsjcbluaeaghwyinkggommsbwnmvekihgnwgiibccpbwfrpxuxwkmnyghnutrudienngxwgorudbskedaaekiuiyqksfazrwzfwbfhzjjqoiulebtlpbfiuffmsnguqkjzqjqizimsmhbqqagaebjdhqwmzdxghiavtcxubegawlgtvstuqurkurpnrckjfkgostdtpg.integ.sav.readn
integck: error!: condition 'w_fd != -1' failed in save_file() at integck.c:1445
integck: error 36 (File name too long)
</quote>
Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
the errors
See my problem description int the previous commit, the point is that integck
in file_check_data reads a buffer, and then checks if the data is correct, it
will do a seek(0), and reread from the same fd. The point is that in the
scenario I observed integck failed (due to a buffer mismatch) but the it saved
(and what was in flash) was actually correct. So I modified this function to
dump the buffers to stderr at the moment an error is found.
Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
<quote>
integck: File Data:
integck: Offset: 0 Size: 196 Seed: 5999877 R.Off: 0
integck: Offset: 196 Size: 33 Seed: 4160795 R.Off: 0
integck: Offset: 229 Size: 1252 Seed: 8070052 R.Off: 0
integck: Offset: 1481 Size: 612 Seed: 4160795 R.Off: 1285
integck: Offset: 2093 Size: 6 Seed: 6946586 R.Off: 0
integck: Offset: 2099 Size: 536 Seed: 4160795 R.Off: 1903
integck: Offset: 2635 Size: 1562 Seed: 9845455 R.Off: 0
integck: Offset: 4197 Size: 80 Seed: 702818 R.Off: 0
integck: Offset: 4277 Size: 115 Seed: 9845455 R.Off: 1642
integck: 9 writes
integck: ============================================
integck: Write Info:
integck: Offset: 826 Size: 357 Seed: 5908448 R.Off: 0
integck: Offset: 4197 Size: 80 Seed: 702818 R.Off: 0
...
</quote>
And I would expect the file data listing to include at offset 826 something
with a size of 357 and a seed of 5908448. Clearly it is not there (which
is already extremely confusing). The point is that file_write_info first
updates the raw_write, then verifies the data (passing the new write)
and only after that updates the write structure. But in file_check_data
only the newly written data is verified (passed as an argument) whilst
the save_file() function to dump the file uses the raw_writes to recreate
the written data (while raw_writes is only updated after after this check
would have succeeded). Several lines to say that in this patch the verify
only gets called _after_ the datastructures are updated.
Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Technically, '-l' linker options should be included only after the
objects which must link to the library. So when we include '-lpthread'
in the LDFLAGS variable, it gets placed too early (i.e., before the
io_paral.o object), and so the pthread linkage never occurs. The
following error probably only shows up with linkers that don't link
pthreads by default.
$ make tests V=1
...
gcc -I../../ubi-utils//include -I ../../include -lpthread -Wall -Wextra -Wwrite-strings -Wno-sign-compare -ffunction-sections -fdata-sections -Wl,--gc-sections -g -o /home/norris/git/mtd-utils/tests/ubi-tests/io_paral /home/norris/git/mtd-utils/tests/ubi-tests/io_paral.o /home/norris/git/mtd-utils/tests/ubi-tests/helpers.o libubi.a
/home/norris/git/mtd-utils/tests/ubi-tests/io_paral.o: In function `main':
/home/norris/git/mtd-utils/tests/ubi-tests/io_paral.c:287: undefined reference to `pthread_create'
/home/norris/git/mtd-utils/tests/ubi-tests/io_paral.c:295: undefined reference to `pthread_create'
/home/norris/git/mtd-utils/tests/ubi-tests/io_paral.c:303: undefined reference to `pthread_join'
collect2: ld returned 1 exit status
make[2]: *** [/home/norris/git/mtd-utils/tests/ubi-tests/io_paral] Error 1
...
$ ld --version
GNU ld (GNU Binutils for Ubuntu) 2.22
...
$ gcc --version
gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3
...
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Sorry, the commit is huge, I just did not have time to split it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
... to avoid confusion when the local common.h shadows the top-level common.h.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
This will not compile for me (due to bit rot?). Maybe the program is
never used?
Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
