summaryrefslogtreecommitdiff
path: root/tests/ubi-tests
AgeCommit message (Collapse)Author
2019-06-16ubi-tests: fm_param: Replace 'fm_auto' with 'fm_autoconvert'Zhihao Cheng
The value of fm_param should be 'fm_autoconvert' rather than 'fm_auto' when fastmap is supported by kernel. Currently, following verbose will appear in dmesg when fm_param is set to 'fm_auto': ubi: unknown parameter 'fm_auto' ignored This patch replace 'fm_auto' with 'fm_autoconvert' for fm_param, so ubi kernel module can receive correct parameters. ---------------------------------------- Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-16ubi-tests: mkvol test: Checks return value 'ENOSPC' for 'ubi_mkvol'Zhihao Cheng
UBI tests try to create too many volumes in mkvol_bad and mkvol_basic. Currently mtd-utils allows return value 'ENFILE' from 'ubi_mkvol', that works fine in most situations. But what if the number of PEBs equals to the maximum count of volumes? For example, mkvol_basic test will fail in a 64MiB flash with 512KiB PEB size. Following is the output of mkvol_basic test: ====================================================================== ====================================================================== ====================================================================== Test on mtdram, fastmap enabled, VID header offset factor 1 ====================================================================== ====================================================================== ====================================================================== mtdram: 64MiB, PEB size 512KiB, fastmap enabled Running mkvol_basic /dev/ubi0 [mkvol_basic] mkvol_multiple():182: function ubi_mkvol() failed with error 28 (No space left on device) [mkvol_basic] mkvol_multiple():183: vol_id 122 Error: mkvol_basic failed FAILURE The reason is that there is no available PEB to support a new volume. We can see following verbose in dmesg: ubi0: attached mtd0 (name "mtdram test device", size 64 MiB) ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128 ubi0: available PEBs: 122, total reserved PEBs: 6, PEBs reserved for bad PEB handling: 0 The maximum count of volumes is 128, so we can create 128 volumes theoretically. But there are 122 available PEBs becauese of existence of reserved PEBs. In addition, a volume occupies at least one PEB. Actually, we can only create 122 volumes, Therefore, 'ubi_mkvol' returns 'ENOSPC' when mkvol_basic tries to create 123rd volume. And we can see corresponding error message in dmesg: ubi0 error: ubi_create_volume [ubi]: not enough PEBs, only 0 available ubi0 error: ubi_create_volume [ubi]: cannot create volume 122, error -28 So, 'ENOSPC' can happen before 'ENFILE' in flash with a small amount of PEBs. This patch checks return value 'ENOSPC' for 'ubi_mkvol' when mkvol test is trying to create too many volumes. ---------------------------------------- Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-16ubi-tests: io_read: Filter invalid offset value before 'lseek' in io_read testZhihao Cheng
There are many different offset values passed in 'lseek' during io_read testing of ubi test. The offset value maybe a negative number or a big number that exceeds the volume data size, which can lead to ubi tests failure by passing invalid offset value to 'lseek'. For example: Example 1: The data size of volume is 39525 bytes, offset = (sz) - MAX_NAND_PAGE_SIZE - 1, where MAX_NAND_PAGE_SIZE is 65536. Here, offset is a negative value passed to 'lseek', which leads to fail in io_read. ====================================================================== ====================================================================== ====================================================================== Test on mtdram, fastmap enabled, VID header offset factor 1 ====================================================================== ====================================================================== ====================================================================== mtdram: 16MiB, PEB size 16KiB, fastmap enabled Running mkvol_basic /dev/ubi0 Running mkvol_bad /dev/ubi0 Running mkvol_paral /dev/ubi0 Running rsvol /dev/ubi0 Running io_basic /dev/ubi0 Running io_read /dev/ubi0 [io_basic] test_read3():189: function seek() failed with error 22 (Invalid argument) [io_basic] test_read3():190: len = 1 [io_basic] test_read2():237: offset = -26012 [io_basic] test_read1():303: length = 1 [io_basic] test_read():362: alignment = 7905 Error: io_read failed FAILURE Example 2: The data size of volume is 79035 bytes, offset = 2 * MAX_NAND_PAGE_SIZE, where MAX_NAND_PAGE_SIZE is 65536. Here, offset is a value exceeds volume size, which leads to fail in io_read. ====================================================================== ====================================================================== ====================================================================== Test on mtdram, fastmap enabled, VID header offset factor 1 ====================================================================== ====================================================================== ====================================================================== mtdram: 16MiB, PEB size 16KiB, fastmap enabled Running mkvol_basic /dev/ubi0 Running mkvol_bad /dev/ubi0 Running mkvol_paral /dev/ubi0 Running rsvol /dev/ubi0 Running io_basic /dev/ubi0 Running io_read /dev/ubi0 [io_basic] test_read3():185: function seek() failed with error 22 (Invalid argument) [io_basic] test_read3():186: len = 1 [io_basic] test_read2():233: offset = 131072 [io_basic] test_read1():299: length = 1 [io_basic] test_read():358: alignment = 3 Error: io_read failed FAILURE This patch checks offset value before executing 'lseek', invalid offset values are filtered. ---------------------------------------- Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-16ubi-tests: ubi_mkvol_request: Fully initialize 'struct ubi_mkvol_request req'Zhihao Cheng
'struct ubi_mkvol_request req' is one parameter of the function 'ubi_mkvol' , this parameter will be passed to kernel and then be checked. It acts as a local variable in many ubi tests, such as io_basic, io_read, mkvol_bad, mkvol_basic, etc. After commit c355aa465fce ("ubi: expose the volume CRC check skip flag") in linux-stable, 'struct ubi_mkvol_request' supports a new configuration named 'flags', and req.flags will be checked in kernel function 'verify_mkvol_req'. Currently, there is no initialization for req.flags before 'ubi_mkvol' invoked. So, req.flags can be an arbitrary number passed to kernel. When we run ubi tests in qemu (x86_64, kernel image: 5.2.0-rc4), the following errors may occur: ====================================================================== ====================================================================== ====================================================================== Test on mtdram, fastmap enabled, VID header offset factor 1 ====================================================================== ====================================================================== ====================================================================== mtdram: 16MiB, PEB size 16KiB, fastmap enabled Running mkvol_basic /dev/ubi0 Running mkvol_bad /dev/ubi0 [mkvol_bad] test_mkvol():105: ubi_mkvol failed with error 22 (Invalid argument), expected 28 (No space left on device) [mkvol_bad] test_mkvol():105: bytes = 16060929 Error: mkvol_bad failed FAILURE This patch fully initializes every 'struct ubi_mkvol_request req' passed to 'ubi_mkvol', which can fix the bug that the ubi test failed caused by that req.flags was not initialized. And it is still compatible with old kernel before kernel commit c355aa465fce ("ubi: expose the volume CRC check skip flag"). ---------------------------------------- Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-10-02mtd-utils: Instead of doing preprocessor magic, just output off_t as long longThorsten Glaser
Fix warnings abot PRIdoff_t in libmtd.c, in mtd_read (and mtd_write): In file included from ../git/lib/libmtd.c:40:0: ../git/lib/libmtd.c: In function 'mtd_read': ../git/include/common.h:110:18: warning: format '%ld' expects argument of type 'long int', but argument 5 has type 'off_t {aka long long int}' [-Wformat=] ../git/include/common.h:120:2: note: in expansion of macro 'errmsg' errmsg(fmt, ##__VA_ARGS__); \ ^~~~~~ ../git/lib/libmtd.c:1082:10: note: in expansion of macro 'sys_errmsg' return sys_errmsg("cannot seek mtd%d to offset %"PRIdoff_t, ^~~~~~~~~~ /usr/lib/klibc/include/inttypes.h:28:17: note: format string is defined here #define PRId32 "d" Signed-off-by: Thorsten Glaser <tg@mirbsd.org> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-09-08ubi-tests: io_paral: Fix error handling of update_volume()Martin Lund
The io_paral test returns success even in case it throws e.g. the following error message: [io_paral] update_volume():125: written and read data are different This patch fixes so that the io_paral application returns a non-zero error code when an error is detected. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-10-05ubi-tests: io_update: fix missleading indentationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Remove unused variables and functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-02-21ubi: tests: Speedup io_paral by using rand_r()Richard Weinberger
rand() is not thread safe, but glibc seems to use a shared state which is protected by a mutex. io_paral spawns a few threads and they call rand() more or less in parallel, which causes heavy lock contention. That makes the test extremely slow on some setups. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-02-21ubi: tests: Support up to 65k NAND page sizeRichard Weinberger
io_read and io_update of mtd-utils support NAND with 4k page size only. Increase that to support up to 65k page size. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-02-21ubi: tests: Replace variable-length array with malloc()David Gstir
io_read and io_update of mtd-utils use variable-length arrays for test data. Since this could result in allocating many megabytes using alloca(), switch to malloc(). Signed-off-by: David Gstir <david@sigma-star.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-02-20Remove README.udev from ubi-tests extra distDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-02-20Remove UDEV_SETTLE_HACKRichard Weinberger
UDEV_SETTLE_HACK addresses a problem which does no longer exist on Linux. These days we have devtmpfs. New devices will automatically created on the kernel side and user space has no longer to wait for udev. As udev has a hard dependency on devtmpfs we can depend on it too. People which don't use udev nor plain devtmpfs are anyways on their own. Android, I'm looking at you... Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2016-12-06common: Fix 'unchecked return code' warningsBoris Brezillon
Several tools are simply not checking return code of functions marked with 'warn_unused_result'. Provide wrappers for the read/write functions to avoid patching old code and providing proper error handling. Fix the remaining ones (calls to fgets() and system()). Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-11-17Integrate tests into autotools build systemDavid Oberhollenzer
Add automake files for the test binaries. If configured to do so, install the test binaries to libexec/mtd-utils and use autoconf to fix the paths in the test scripts. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-11-17Change build system to autotoolsRichard Weinberger
This patch is largely based on Richards original RFC. The major differences to the RFC patch are: - Add missing sumtools & mtdpart targets - Fix name of mkfs.jffs2 target - Add missing subdir-objects option for non-recursive make - Move all automake options to configure.ac - Add manpages to install target - Make XATTR & LZO support configurable - Install binaries to sbin directory like in the old build system - Install flash_erase wrapper script - Add files missing from distribution target Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2015-07-06mtd-utils: fix 'new blank line at EOF' problemsDongsheng Yang
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-07-06mtd-utils: fix the trailing whitespace problemsDongsheng Yang
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-07-06mtd-utils: ubi-tests: fix a some overflowsDongsheng Yang
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2012-12-03ubi-tests: fix pthreads linkingBrian Norris
Technically, '-l' linker options should be included only after the objects which must link to the library. So when we include '-lpthread' in the LDFLAGS variable, it gets placed too early (i.e., before the io_paral.o object), and so the pthread linkage never occurs. The following error probably only shows up with linkers that don't link pthreads by default. $ make tests V=1 ... gcc -I../../ubi-utils//include -I ../../include -lpthread -Wall -Wextra -Wwrite-strings -Wno-sign-compare -ffunction-sections -fdata-sections -Wl,--gc-sections -g -o /home/norris/git/mtd-utils/tests/ubi-tests/io_paral /home/norris/git/mtd-utils/tests/ubi-tests/io_paral.o /home/norris/git/mtd-utils/tests/ubi-tests/helpers.o libubi.a /home/norris/git/mtd-utils/tests/ubi-tests/io_paral.o: In function `main': /home/norris/git/mtd-utils/tests/ubi-tests/io_paral.c:287: undefined reference to `pthread_create' /home/norris/git/mtd-utils/tests/ubi-tests/io_paral.c:295: undefined reference to `pthread_create' /home/norris/git/mtd-utils/tests/ubi-tests/io_paral.c:303: undefined reference to `pthread_join' collect2: ld returned 1 exit status make[2]: *** [/home/norris/git/mtd-utils/tests/ubi-tests/io_paral] Error 1 ... $ ld --version GNU ld (GNU Binutils for Ubuntu) 2.22 ... $ gcc --version gcc (Ubuntu/Linaro 4.6.3-1ubuntu5) 4.6.3 ... Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-16ubi-tests: switch to using common.h from the top levelArtem Bityutskiy
Sorry, the commit is huge, I just did not have time to split it. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-16ubi-tests: rename common.[ch] to helpers.[ch]Artem Bityutskiy
... to avoid confusion when the local common.h shadows the top-level common.h. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-16ubi-tests: ubi_leb_change_start() no longer uses 'dtype'.Bill Pringlemeir
This will not compile for me (due to bit rot?). Maybe the program is never used? Signed-off-by: Bill Pringlemeir <bpringlemeir@nbsps.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-25consistency between u_int32_t / off_t / off64_tRichard Genoud
We should use the off_t type instead of off64_t or u_int32_t as its length is controlled by the WITHOUT_LARGEFILE flag. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-25tests: io_update correct lseek parameters orderRichard Genoud
There's a typo in lseek parameters order. But, due to the value of SEEK_SET, this commit doesn't introduce a change. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-22UBI: sync ubi-user.h with kernel v3.6-rc1Richard Genoud
Also remove the eraseblock type support, because kernel commit a65a0eb6d198e058687a9214683bd1c418f20d39 set the dtype parameter as obsolete. Also adjust to some renames: * 'UBI_PROP_DIRECT_WRITE' -> 'UBI_VOL_PROP_DIRECT_WRITE' * 'struct ubi_set_prop_req' -> 'struct ubi_set_vol_prop_req'. * 'UBI_IOCSETPROP' -> 'UBI_IOCSETVOLPROP' Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: remove a warningArtem Bityutskiy
If /proc/mtd does not exist, we have this warning: grep: /proc/mtd: No such file or directory Get rid of this. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: add mtdram testsArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: support testing without sub-pagesArtem Bityutskiy
Run the tests with VID header at the second page as well for better coverage. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: develop the test furtherArtem Bityutskiy
Add a lot of test passes on nandsim with different geometry. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03runtests.sh: print more consistent messagesArtem Bityutskiy
On success we print "SUCCESS", lets print "FAILURE" on failure. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-03stress-test.sh: do not use pipe unnecessarilyArtem Bityutskiy
Use 'grep patt file' instead of cat file | grep patt. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-02tests: ubi: add stress-test.shArtem Bityutskiy
It is not finished yet, but it will run all tests on nandsim and mtdram of different geometry. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-02tests: ubi: clean-up runtests.sh some moreArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-08-02tests: ubi: clean-up the runtests.sh scriptArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2011-08-23mtd-utils: use __func__ instead of __FUNCTION__Brian Norris
__func__ is more portable Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-06-29mtd-tests: io_paral: build error, "variable length strings"Brian Norris
Some compilers will complain about use of strlen() within a static array size declaration. For this type of string, "sizeof() - 1" is equivalent and prevents the build error. Error: io_paral.c:48:13: error: variably modified 'vol_nodes' at file scope Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-27rewrite build system to avoid recursionMike Frysinger
The ubi-utils/src/ subdir is tossed as it just complicates things for no real gain. The dictionary.h header is relocated to the ubi-utils/include/ since other headers in there need it. The top level clean is replaced with a `find -delete` on objects, so it might prune more than necessary, but many projects now do this sort of thing and no one complained there. A "mkdep" helper generates the actual rule, and the variables are used with "foreach" to expand these automatically. The tests subdir is updated only to reflect the ubi-utils source move. Otherwise, it is left untouched as making that non-recursive isn't really worth the effort. While we're gutting things, also through in kbuild style output while building to make things more legible. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-04-14tests: ubi-tests: clean libubi.a and *.oAndy Shevchenko
The common.mk contains clean target that removes *.o and $(TARGETS). Thus, make custom clean target only for libubi.a Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-04-05tests: ubi-tests: seed_random_generator() was used w/o prototypeAndy Shevchenko
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-test: seed the random genrator in testsArtem Bityutskiy
Add a common seed_random_generator() and make tests use it for seeding the random generator. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-tests: use rand instead of random in io_paralArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-tests: remove some junk from the integ testArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14ubi-tests: add normsgArtem Bityutskiy
Just like we have in ubi-utils. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14ubi-tests: teach errmsg and failed return error codeArtem Bityutskiy
Just like we do in ubi-utils. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14ubi-tests: rename err_msg to errmsgArtem Bityutskiy
For consistency with ubi-utils. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-11ubi-tests: add .gitignore fileArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08ubi-tests: improve io_paral testArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08ubi-tests: various changesArtem Bityutskiy
Mostly improvments in io_paral. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-07ubi-tests: make tests compile againArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>