| Age | Commit message (Collapse) | Author |
|---|
|
This introduces a new feature to the MTD command line utilities that
allows MTD devices to be referenced by name instead of device node. For
example this looks like:
> # Display info for the MTD device with name "data"
> mtdinfo mtd:data
> # Copy file to MTD device with name "data"
> flashcp /my/file mtd:data
This follows the syntax supported by the kernel which allows MTD
device's to be mounted by name[1].
Add the function mtd_find_dev_node() that accepts an MTD "identifier"
and returns the MTD's device node. The function accepts a string
starting with "mtd:" which it treats as the MTD's name. It then attempts
to search for the MTD, and if found maps it back to the /dev/mtdX device
node. If the string does not start with "mtd:", then assume it's the old
style and refers directly to a MTD device node.
The function is then hooked into existing tools like flashcp, mtdinfo,
flash_unlock, etc. To load in the new MTD parsing code in a consistent
way across programs.
[1] http://www.linux-mtd.infradead.org/faq/jffs2.html#L_mtdblock
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add correct casting for written to prevent overflow that size_t is
only 32 bits on a 32-bit platform.
Signed-off-by: cchoux <chou.cosmo@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The --partition mode is not verifying that data is being written
successfully.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The DIFF_BLOCKS code requires that src and dest buffers be large enough
to hold one MTD erasesize. This is because each loop operates on one
eraseblock so that it can erase and write one whole sector. But the src
and dest buffers are fixed at BUFSIZE, so on platforms where the MTD
erasesize are larger then BUFSIZE it will overflow the buffers.
Instead allocate the buffers dynamically so that they can be sized to
fit the erasesize.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Most of the uses of log_printf fall into two styles
> if (flags & FLAG_VERBOSE)
> log_printf(LOG_NORMAL, ...);
or
> log_printf(LOG_ERROR, ...)
> exit(EXIT_FAILURE);
Replace them with log_verbose and log_failure respectively.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add a safe_lseek wrapper to check for lseek errors.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Share the writing code between the two write implementations.
Signed-off-by: Brandon Maier <brandon.maier@collins.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- The original flashcp process is erase, write and verify all blocks
in one time from file to device.
This patch will add a function that only copy different block data
from file to device. The function will compare blocks by block
between file and device, then erase and write block data from file
to device if found different block.
Signed-off-by: Harvey Wu <harveywu95@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Sometimes there's a need to erase the whole device when
programming an image, and not just the area under the
image itself.
Therefore, option -A/--erase-all has been added which
erases the whole device before writing the image.
Signed-off-by: Andrij Abyzov <drolevar@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
flashcp was always showing 0% progress due to incorrect
printf format specifier.
Signed-off-by: Andrij Abyzov <drolevar@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
A common pattern in command line processing is having a usage()
function that prints out how to use the command line options and
then terminates.
The function is typically used inside a switch block for command
line options like `-h' or unknown options. In a lot of places, the
break keyword is omitted, because the function exits anyway. However,
this triggers gcc warnings about implicit fall-through.
Rather than adding a phony "/* fall-through */" this patch flags the
usage() style function with a gcc attribute, indicating that they do
not return and removes further superfluous break statements.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The EXIT_{FAILURE|SUCCESS} are already defined in stdlib.h.
Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add correct casting for filestat.st_size in flashcp.c. While the
interim status updates had correct casting from commit 08b243, the
final update was not.
Signed-off-by: Jonathan Fether <jonf@mds.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
When a program does sophisticated enough command line processing
(i.e. getopt), make sure it responds to -V and --version.
When a program prints a version string, make sure it uses the
common_print_version macro to print out its name, that it is part
of mtd-utils and the mtd-utils version from the build system in a
fashion similar to common program packages like the GNU coreutils.
When a program responds to -V/--version or -h/--help, make sure it
reports success exit status.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
filestat.st_size type is off_t.
For some paltforms, off_t can be 32 or 64bit but there is no C99 format specifier for off_t.
The best way to print it with printf is to cast it to long long and print with %llu
Signed-off-by: Fabien Proriol <fabien.proriol@jdsu.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
* There is no code modification in this commit, only moving
* the files to proper place.
The user tools looks a little messy as we place almost
the all tools in the root directory of mtd-utils. To make
it more clear, I propose to introduce the following structure
for our source code.
mtd-utils/
|-- lib
|-- include
|-- misc-utils
|-- jffsX-utils
|-- nand-utils
|-- nor-utils
|-- ubi-utils
|-- ubifs-utils
`-- tests
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
