summaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2021-02-28mtd-utils: Use AC_SYS_LARGEFILESascha Hauer
Currently mtd-utils on 32bit systems fail on devices >2GiB due to off_t being a signed 32bit type. Add AC_SYS_LARGEFILE to make off_t a 64bit type. Adding AC_SYS_LARGEFILE results in _FILE_OFFSET_BITS being defined to 64 in include/config.h. To let this have an effect we must make sure that include/config.h is included before all other includes which is archieved by adding its inclusion to CPPFLAGS. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2021-01-20Fix test binary installationDavid Oberhollenzer
- Remove "install tests" configure option, we already have an option whether to build tests or not. Don't try to work around autotools semantics that people building the package expect. - Fix the installation path by propperly defining it and using the correct name for the libexec path. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-11-29mtd-utils: ubihealthd: this tool does not depend on UBIFSJuergen Borleis
The "need_getrandom" check and result is used only for the "ubihealthd". This tool is very important to have it around at run-time, while the corresponding "mkfs.ubifs" tool is still optional (think about offline generated ubifs images). Since compiling "mkfs.ubifs" adds more dependencies (various shared libraries), buildsystems for embedded devices will add these shared libraries to the root filesystem even if "mkfs.ubifs" isn't used or installed. Thus, handling both tools independently makes sense. The previous behavior is kept, e.g. if UBIFS support is enabled, it enables "ubihealthd" as well. Signed-off-by: Juergen Borleis <jbe@pengutronix.de> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2020-07-13Release mtd-utils-2.1.2v2.1.2David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-12-08ubihealthd: Build only if sys/random.h is presentMarek Vasut
The ubihealthd depends on sys/random.h , which is not present on some older systems. Build ubihealthd only if sys/random.h is present. Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-07-21Release mtd-utils-2.1.1v2.1.1David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-06-01mkfs.ubifs: Add ZSTD compressionSebastian Andrzej Siewior
I added ZSTD support to mkfs.ubifs and compared the ZSTD results with zlib/lzo and the available ZSTD compression levels. The results are in the following table: Comp image MiB time image2 MiB time none 271 0m 0,723s 223 0m 0,589s lzo 164 0m13,705s 116 0m11,636s zlib 150 0m 7,654s 103 0m 6,347s favor-lzo 158 0m21,137s 110 0m17,764s zstd-01 154 0m 1,607s 106 0m 1,429s zstd-02 153 0m 1,704s 105 0m 1,479s zstd-03* 152 0m 1,888s 104 0m 1,668s zstd-04 151 0m 2,741s 103 0m 2,391s zstd-05 150 0m 3,257s 102 0m 2,916s zstd-06 150 0m 3,735s 102 0m 3,356s zstd-07 150 0m 4,066s 102 0m 3,705s zstd-08 152 0m 1,857s 104 0m 1,644s zstd-09 152 0m 1,855s 104 0m 1,639s zstd-10 150 0m 6,654s 102 0m 6,195s zstd-11 150 0m10,027s 102 0m 9,130s zstd-12 149 0m14,724s 101 0m13,415s zstd-13 148 0m18,232s 100 0m16,719s zstd-14 148 0m20,859s 100 0m19,554s zstd-15 148 0m25,033s 100 0m23,186s zstd-16 148 0m38,837s 100 0m36,543s zstd-17 148 0m46,051s 100 0m43,120s zstd-18 148 0m49,157s 100 0m45,807s zstd-19 148 0m49,421s 100 0m45,951s zstd-20 148 0m51,271s 100 0m48,030s zstd-21 148 0m51,015s 100 0m48,676s zstd-22 148 0m52,575s 100 0m50,013s The UBIFS image was created via mkfs.ubifs -x $Comp -m 512 -e 128KiB -c 2200 -r $image $out I used "debootstrap sid" to create a basic RFS and the results are in the `image' column. The image2 column denotes the results for the same image but with .deb files removed. The time column contains the output of the run time of the command. ZSTD's compression level three is currently default. Based on the compression results (for the default level) it outperforms LZO in run time and compression and is almost as good as ZLIB in terms of compression but quicker. The higher compression levels make almost no difference in compression but take a lot of time. The compression level used is the default offered by ZSTD. It does not make sense the higher levels. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2019-03-13Release mtd-utils-2.1.0v2.1.0David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-11-01mkfs.ubifs: Enable support for building without cryptoRichard Weinberger
Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-11-01mkfs.ubifs: Add crypto helper functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-06-18Add configure switch to disable compiling/installing lsmtdDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-06-14mkfs.ubifs: Implement selinux labelling support in mkfs.ubifs.Ritesh Harjani
This implements/adds selinux labelling support to mkfs.ubifs utility. It adds an extra option in configure to enable selinux labelling support and then finally in mkfs.ubifs adds an extra option to pass the file_contexts which is looked up for filesystem file labels. - Default behavior is kept without selinux so as to not break existing support where selinux library/headers may not be present. - If this is configured with --with-selinux then XATTR from the file_contexts(passed with --selinux option while mkfs.ubifs) will be taken and not from the host file's xattr. This is done to avoid the problem where the host OS may have selinux enabled and hence same xattr names will be present in both host filesystem files and from the --selinux=file passed. So the existing behavior is kept mutually exclusive and preference is given to selinux xattrs (if configured with --with-selinux). Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-05-12mtd-utils: make sure pkg-config is installed in configure scriptDavid Oberhollenzer
This patch adds a check to configure.ac that tests if pkg-config is available on the system. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-04-16Release mtd-utils-2.0.2v2.0.2David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-03Enable further warning flags, address new warningsDavid Oberhollenzer
mtd_debug: Remove a duplicate if case. MTD_CAP_NANDFLASH has only one flag set (MTD_WRITEABLE). Directly below, we had a check for MTD_WRITEABLE in the else branch which can't possible ever have triggered. Checking for MTD_WRITEABLE in addition to the CAP constants was probably not intended anyway, given the check for the individual flags if all else fails. integck: We already established that "r" is less than the number of elements in the list, so the loop condition doesn't need to check if w is NULL in addition. At least this way, the compiler "gets" that w cannot be NULL below and doesn't issue warnings. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-08-24Release mtd-utils-2.0.1v2.0.1David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Enable compiler warningsDavid Oberhollenzer
This patch borrows the compiler.m4 script from util-linux to check for compiler support of a number of warning flags and sets them if they are supported. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Use autoconf header detection correctly for libmissingDavid Oberhollenzer
AC_CHECK_HEADERS already makes sure our config header contains a HAVE_$FOO_H macro if a header was found. There is no need to awkwardly set our own Automake conditionals and check for it all over the place in the Automake files. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Restructure autoconf configure.acDavid Oberhollenzer
This patch attempts to cleanly seperate configure switches, dependency checking and generating of output files inside the autoconf configure.ac file. Also, instead of aborting immediately if a dependency is missing, the configure script now completes dependency checking and then lists ALL dependencies that are missing for the selected build options. In addtion, suggestions on how to disable some features that require the missing dependencies are printed out. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-02-20mtd-utils: Fix format specifier definitions for off_t and loff_t.Torsten Fleischer
On 32bit systems (e.g. ARM) the size of off_t can be 4 byte and the size of loff_t 8 byte. This causes compiler warnings like the following: flash_erase.c: In function 'show_progress': flash_erase.c:56:22: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 3 has type 'off_t {aka long int}' [-Wformat=] bareverbose(!quiet, "\rErasing %d Kibyte @ %"PRIxoff_t" -- %2i %% complete ", and an output like this: ~# flash_erase /dev/mtd2 0 1 Erasing 64 Kibyte @ 6400000000 -- 0 % complete ~# Since the size of off_t and loff_t can differ from each other, the printf format specifier should be determined separately for both. Further the format specifiers should be based directly on the size of the particular data type. Signed-off-by: Torsten Fleischer <torfl6749@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2016-12-22Release mtd-utils-2.0.0v2.0.0David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2016-12-22mtd-utils: Add configure switches to disable jffsX or ubifs toolsDavid Oberhollenzer
For some applications, like building a root filesystem for an embedded device, it may be desireable to only build and install a subset of the mtd-utils. This can be done throught the targets of the generated Makefile and hand picking executables, however the jffsX and ubifs utilities have external build dependencies that may not be needed. This patch adds configure switches to disable building the jffsX and ubifs utilities. Their respective build dependencies (zlib, lzo, uuid) are only requested if the tools are being built. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Reviewed-by: Richard Weinberger <richard@nod.at>
2016-12-14Release mtd-utils-2.0.0-rc2v2.0.0-rc2David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2016-12-07Release mtd-utils-2.0.0-rc1v2.0.0-rc1David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2016-12-06common: Fix PRI{x,d}off definitions for x86_64 platformBoris Brezillon
Compiling for x86_64 generates a lot of warning because the PRIxoff_t and PRIdoff_t are not properly defined, which comes from the missing SIZEOF_LONG definition. Use the autotools to generate a config.h header, include this header from common.h and ask autoheader to generate the SIZEOF_LONG and SIZEOF_LOFF_T definitions. Use these new definitions to assign the proper descriptors to PRIxoff_t and PRIdoff_t. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-11-29Define WITHOUT_XATTR if sys/acl.h or sys/xattr.h is missingDavid Oberhollenzer
The programs mkfs.jffs2 and mkfs.ubifs include those two headers if WITHOUT_XATTR is not defined. Up to now, this macro is only defined if the configure script is run with --without-xattr. If the headers are not present on a system and the configure script is run without special flags set, the build fails. This patch adds a check for the presence of those headers and disables the feature if one of the headers is missing. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2016-11-17Add Makefile for unittestsDaniel Walter
Signed-off-by: Daniel Walter <dwalter@sigma-star.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2016-11-17Add libmissingDavid Oberhollenzer
This patch adds a libmissing library to mtd-utils, containing implementations of functionality found in glibc but typically missing from embedded C libraries such as uclibc ot musl. For now, the library only contains stub implementations of the backtrace*() family of functions. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-11-17Add -lrt for clock_gettime() in glibc < 2.17.David Gstir
Some tools use clock_gettime() which requires building with -lrt for versions of glibc before 2.17. Signed-off-by: David Gstir <david@sigma-star.at>
2016-11-17Fix make_a_release scriptDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-11-17Integrate tests into autotools build systemDavid Oberhollenzer
Add automake files for the test binaries. If configured to do so, install the test binaries to libexec/mtd-utils and use autoconf to fix the paths in the test scripts. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-11-17Change build system to autotoolsRichard Weinberger
This patch is largely based on Richards original RFC. The major differences to the RFC patch are: - Add missing sumtools & mtdpart targets - Fix name of mkfs.jffs2 target - Add missing subdir-objects option for non-recursive make - Move all automake options to configure.ac - Add manpages to install target - Make XATTR & LZO support configurable - Install binaries to sbin directory like in the old build system - Install flash_erase wrapper script - Add files missing from distribution target Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at> Signed-off-by: Richard Weinberger <richard@nod.at>