| Age | Commit message (Collapse) | Author |
|---|
|
The CHANGELOG tries to summarize the change history of the project
and currently contains changes from 2.0.0 onwards that could easily
be extracted from the release mails.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Currently mtd-utils on 32bit systems fail on devices >2GiB due to off_t being
a signed 32bit type. Add AC_SYS_LARGEFILE to make off_t a 64bit type.
Adding AC_SYS_LARGEFILE results in _FILE_OFFSET_BITS being defined to 64
in include/config.h. To let this have an effect we must make sure that
include/config.h is included before all other includes which is
archieved by adding its inclusion to CPPFLAGS.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
- Remove "install tests" configure option, we already have an option
whether to build tests or not. Don't try to work around autotools
semantics that people building the package expect.
- Fix the installation path by propperly defining it and using the
correct name for the libexec path.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Throughout the Automake files, there is a consistent pattern somewhat
like this:
FOO_BINS = ....
sbin_PROGRAMS += $(FOO_BINS)
This commit all such patterns whenever the variable is not used anywhere
else and appends to the target directly.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This commit removes the C header files from the EXTRA_DIST variables
and instead assigns them to the SOURCE variable of the respective
components they belong to.
This takes care of having them distributed in the release tar ball and
helps with dependency tracking a little.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The ubihealthd depends on sys/random.h , which is not present on some
older systems. Build ubihealthd only if sys/random.h is present.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
I added ZSTD support to mkfs.ubifs and compared the ZSTD results with
zlib/lzo and the available ZSTD compression levels. The results are in
the following table:
Comp image MiB time image2 MiB time
none 271 0m 0,723s 223 0m 0,589s
lzo 164 0m13,705s 116 0m11,636s
zlib 150 0m 7,654s 103 0m 6,347s
favor-lzo 158 0m21,137s 110 0m17,764s
zstd-01 154 0m 1,607s 106 0m 1,429s
zstd-02 153 0m 1,704s 105 0m 1,479s
zstd-03* 152 0m 1,888s 104 0m 1,668s
zstd-04 151 0m 2,741s 103 0m 2,391s
zstd-05 150 0m 3,257s 102 0m 2,916s
zstd-06 150 0m 3,735s 102 0m 3,356s
zstd-07 150 0m 4,066s 102 0m 3,705s
zstd-08 152 0m 1,857s 104 0m 1,644s
zstd-09 152 0m 1,855s 104 0m 1,639s
zstd-10 150 0m 6,654s 102 0m 6,195s
zstd-11 150 0m10,027s 102 0m 9,130s
zstd-12 149 0m14,724s 101 0m13,415s
zstd-13 148 0m18,232s 100 0m16,719s
zstd-14 148 0m20,859s 100 0m19,554s
zstd-15 148 0m25,033s 100 0m23,186s
zstd-16 148 0m38,837s 100 0m36,543s
zstd-17 148 0m46,051s 100 0m43,120s
zstd-18 148 0m49,157s 100 0m45,807s
zstd-19 148 0m49,421s 100 0m45,951s
zstd-20 148 0m51,271s 100 0m48,030s
zstd-21 148 0m51,015s 100 0m48,676s
zstd-22 148 0m52,575s 100 0m50,013s
The UBIFS image was created via
mkfs.ubifs -x $Comp -m 512 -e 128KiB -c 2200 -r $image $out
I used "debootstrap sid" to create a basic RFS and the results are in
the `image' column. The image2 column denotes the results for the same
image but with .deb files removed.
The time column contains the output of the run time of the command.
ZSTD's compression level three is currently default. Based on the
compression results (for the default level) it outperforms LZO in
run time and compression and is almost as good as ZLIB in terms of
compression but quicker.
The higher compression levels make almost no difference in compression
but take a lot of time.
The compression level used is the default offered by ZSTD. It does not
make sense the higher levels.
Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This implements/adds selinux labelling support to mkfs.ubifs
utility. It adds an extra option in configure to enable
selinux labelling support and then finally in mkfs.ubifs adds
an extra option to pass the file_contexts which is looked up
for filesystem file labels.
- Default behavior is kept without selinux so as to not break existing
support where selinux library/headers may not be present.
- If this is configured with --with-selinux then XATTR from the
file_contexts(passed with --selinux option while mkfs.ubifs)
will be taken and not from the host file's xattr.
This is done to avoid the problem where the host OS may have
selinux enabled and hence same xattr names will be present in both
host filesystem files and from the --selinux=file passed.
So the existing behavior is kept mutually exclusive and preference
is given to selinux xattrs (if configured with --with-selinux).
Signed-off-by: Ritesh Harjani <riteshh@codeaurora.org>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This patch borrows the compiler.m4 script from util-linux to check
for compiler support of a number of warning flags and sets them if
they are supported.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
AC_CHECK_HEADERS already makes sure our config header contains a
HAVE_$FOO_H macro if a header was found. There is no need to
awkwardly set our own Automake conditionals and check for it all
over the place in the Automake files.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
For some applications, like building a root filesystem for an embedded
device, it may be desireable to only build and install a subset of the
mtd-utils. This can be done throught the targets of the generated
Makefile and hand picking executables, however the jffsX and ubifs
utilities have external build dependencies that may not be needed.
This patch adds configure switches to disable building the jffsX and
ubifs utilities. Their respective build dependencies (zlib, lzo, uuid)
are only requested if the tools are being built.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Reviewed-by: Richard Weinberger <richard@nod.at>
|
|
This patch removes the lengthy help text from the ubinize utility
that attempted to describte the file format and every minor detail,
and reformats it into a more readable man page.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Basically a user space port of the mtd torture test kernel module. In
addition to the block offset and count module parameters, the utility
supports a block stride and can restore the block contents after test.
In contrast to the kernel module, the torture test is implemented by
the libmtd mtd_toruture function and thus doesn't allow for similarly
fine grained options on diagnostics.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This patch adds a libmissing library to mtd-utils, containing
implementations of functionality found in glibc but typically
missing from embedded C libraries such as uclibc ot musl.
For now, the library only contains stub implementations of
the backtrace*() family of functions.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Add automake files for the test binaries. If configured to do so,
install the test binaries to libexec/mtd-utils and use autoconf to
fix the paths in the test scripts.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This patch is largely based on Richards original RFC.
The major differences to the RFC patch are:
- Add missing sumtools & mtdpart targets
- Fix name of mkfs.jffs2 target
- Add missing subdir-objects option for non-recursive make
- Move all automake options to configure.ac
- Add manpages to install target
- Make XATTR & LZO support configurable
- Install binaries to sbin directory like in the old build system
- Install flash_erase wrapper script
- Add files missing from distribution target
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Signed-off-by: Josh Boyer <jwboyer@gmail.com>
|
|
|
