aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-08-23nandwrite: refactor "old_oobinfo" codeBrian Norris
Move variable within conditional and remove duplicated code. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-23nandwrite: cleanup "oobinfochanged" leftoversBrian Norris
We don't really use oobinfochanged anymore, since all the calls to the MEMSETOOBSEL ioctls are gone. The remaining usage of it is superfluous now, as the only case where it is changed is under the "noecc" condition and the only case where it is tested is under the "!noecc" condition. We also no longer need the "restoreoob" label and can instead simply close everything done with the single remaining label, "closeall". Note that `close(-1)' is legal, although useless. Finally, we move `old_oobinfo' into the only block of code in which it's used now. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-23nandwrite: kill -j, -y, and -f optionsBrian Norris
The legacy -j (--jffs2) and -y (--yaffs) options haven't been operational for a long time, since MEMSETOOBSEL was killed. I don't think anybody will miss these options (correct me if I'm wrong). They can be replaced by proper usage of MTD_OOB_AUTO modes. The -f (--forcelegacy) option went hand in hand with -j and -y. Now that -j and -y are gone, there's no use for -f. Kill it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-23nandwrite: kill more MEMSETOOBSELBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-23nandwrite: remove `autoplace' featuresBrian Norris
The `autoplace' option was meant to force an MTD_OOB_AUTO layout while writing to flash. This option has not been properly supported for a very long time, as the necessary ioctl, MEMSETOOBSEL, has been removed. Apparently nobody uses this option. Kill it. Other code depends on the availability of the `old_oobinfo' data, so we move some code within a block that handles autoplacement if it's *already* enabled. This, however, is inconsistent and should be cleaned up shortly. Note: this option may be re-implemented in the near future with the addition of a new ioctl that allows on-the-fly chaning of MTD OOB modes. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-23nandwrite: remove C99 comment styleBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-23mtd-utils: use __func__ instead of __FUNCTION__Brian Norris
__func__ is more portable Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-23mtd_debug: replace #defines with enumBrian Norris
enum provides a cleaner mechanism that creating single-purpose `#define`s. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-23mtd_debug: fixup styleBrian Norris
Remove extraneous spaces. Put braces on same line as "if", "for", "switch", etc. statements. No parentheses around return values. Use "errmsg_die" from common.h. Replace "exit (1)" with "exit(EXIT_FAILURE)". Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-20mkfs.ubifs/ubinize: increase PEB size limit to 2MiBViktar Palstsiuk
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
2011-08-20Bumb version numberArtem Bityutskiy
We released mtd-utils 1.4.6 as a bug-fix release. Bump the version number in Makefile. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
2011-08-19 nandwrite: invalid erase after page write failureFryar, Jeff
mtd-utils nandwrite.c: After a page write failure, the calculation of the block number to erase is incorrect. The erase block size is being passed as the erase block number in the call to mtd_erase(). Signed-off-by: Jeff Fryar <jeff.fryar@hp.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-16mtdinfo: consolidate help as display_help()Brian Norris
The help message for mtdinfo is unnecessarily disjointed. It is split into three strings which reuse the PROGRAM_NAME string inefficiently and don't have a consistent style. This fixup should provide a cleaner look with aligned columns and easier-to-read source code. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-16mtdinfo: fixup "example usage" help sectionBrian Norris
Line up columns better so that everything is more readable. Remove "Example 1" since `mtdinfo' does not print information when not given any arguments. Remove "...UBI layout information" from description of Example 4, since Example 4 (now 3) doesn't include the `-u' flag. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-16mtdinfo: restructure help messageBrian Norris
We weren't very consistent in how we listed our options in the mtdinfo help string (listing short options, long options, or both). Plus, not all options are inter-operable, so we should distinguish this somewhat. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-16mtdinfo: refactor code to remove "args.all" dependencyBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-08-16mtdinfo: don't open NULL pointer when getting region_info with `-a'Brian Norris
This "fixes" a regression found in: commit 266061ebd5d72391f0a0e831b018e8fc7fea68a1 mtdinfo: add regioninfo/eraseblock map display On certain flash (NOR flash that have eraseblock region info), `mtdinfo -a' tries to open the MTD node file, for use with the ioctl MEMGETREGIONINFO; however, we didn't supply a device node path to `mtdinfo -a', so it's using NULL, resulting in errors like: mtdinfo: error!: couldn't open MTD dev: (null) error 14 (Bad address) For now, we can just skip dumping region_info with the `-a' flag. If we find a better way to do this (e.g., export via sysfs, find device nodes via automatic routines, etc.), then we can kill the workaround and this FIXME should be removed. The regression was first reported at: http://lists.infradead.org/pipermail/linux-mtd/2011-July/037232.html The result of recent changes is that we cannot get region_info for devices via the `--all' option. We add a note in the help message warning that mtdinfo may find more info when given a device patch, e.g., /dev/mtdX. Reported-by: Brian Foster <brian.foster@maxim-ic.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-07-20Makefile: show nice message when checking version.hBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-07-20Makefile: fix "make clean" for cross-compileBrian Norris
When cross-compiling (make CROSS=mipsel-linux-), I get this error: rm -rf /home/norris/git/mtd-utils/mipsel-linux find /home/norris/git/mtd-utils/mipsel-linux/ -xdev \ '(' -name '*.[ao]' -o -name '.*.c.dep' ')' \ -exec rm -f {} + find: `/home/norris/git/mtd-utils/mipsel-linux/': No such file or directory make: *** [clean] Error 1 Now, for cross-compiling, we've already deleted the $(BUILDDIR), so we should check this before cleaning individual objects with "find." Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-07-20Makefile: fix "version.h" build for cross-compilingBrian Norris
When using "make CROSS=mipsel-linux-", I get the following errors: /bin/sh: /home/norris/git/mtd-utils/mipsel-linux/include/version.h.tmp: No such file or directory make: *** [/home/norris/git/mtd-utils/mipsel-linux/include/version.h.tmp] Error 1 Fix (suggested by Mike Frysinger): create the directory if it doesn't exist. Also, $(CC) needs to be able to find the generated header in $(BUILDDIR)/include. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-07-04mkfs.ubifs: fix a gcc warningArtem Bityutskiy
This patch "fixes" the following gcc warning: mkfs.ubifs/mkfs.ubifs.c: In function ‘main’: mkfs.ubifs/ubifs.h:420:2: warning: ‘child_cnt’ may be used uninitialized in this function [-Wuninitialized] mkfs.ubifs/mkfs.ubifs.c:1735:6: note: ‘child_cnt’ was declared here by initializing the ‘child_cnt’ to zero. Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-07-04mkfs.ubifs: remove root inode squash featureArtem Bityutskiy
Remove the -squash-rino-perm mkfs.ubifs option as this was planned. Remove the corresponding record from the feature-removal-schedule.txt file. Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-30flash_erase: fix incorrect help messageBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-30mtdinfo: remove -m leftoversArtem Bityutskiy
We have removed the -m option, but did not remove args.mtdn which represents the -m parameters. Kill args.mtdn as well. Tweaked by Brian Norris. Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2011-06-29mtdinfo: kill -m optionBrian Norris
According to feature-removal-schedule, we shouldn't use `-m', since it relies on a specific device-naming pattern. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-utils: kill flash_infoBrian Norris
According to "feature-removal-schedule," we kill flash_info in favor of mtdinfo. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-utils: switch more utils to unified versioningBrian Norris
More utilities now use the common VERSION system. For utils that printed a very simple message, we use the new common_print_version() "function." Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-utils: add common version printing functionBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mkfs.ubifs: use common.hBrian Norris
To use more unified versioning and to re-use other existing code, switch to common.h. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-utils: update .gitignore filesBrian Norris
First, the top-level Makefile should not tell git to ignore sub-level .gitignore files. Second, add simple .gitignores to ignore the executables generated under the various `tests' subdirectories. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-utils: remove whitespace at end of linesBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-tests: io_paral: build error, "variable length strings"Brian Norris
Some compilers will complain about use of strlen() within a static array size declaration. For this type of string, "sizeof() - 1" is equivalent and prevents the build error. Error: io_paral.c:48:13: error: variably modified 'vol_nodes' at file scope Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29mtd-tests: checkfs: fix size_t related warningBrian Norris
Depending on your compiler, size_t may or may not be long unsigned int. Use printf's %zu format to clarify. Warning message: checkfs.c:524:28: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'unsigned int' Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-29nanddump: remove unused variableBrian Norris
The "bb_default" bool was temporarily being used to straighten out potential issues with the changing --bb=METHOD options and to warn users properly. Now, it's unnecessary. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-27autogenerate version.h from build systemMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2011-06-27rewrite build system to avoid recursionMike Frysinger
The ubi-utils/src/ subdir is tossed as it just complicates things for no real gain. The dictionary.h header is relocated to the ubi-utils/include/ since other headers in there need it. The top level clean is replaced with a `find -delete` on objects, so it might prune more than necessary, but many projects now do this sort of thing and no one complained there. A "mkdep" helper generates the actual rule, and the variables are used with "foreach" to expand these automatically. The tests subdir is updated only to reflect the ubi-utils source move. Otherwise, it is left untouched as making that non-recursive isn't really worth the effort. While we're gutting things, also through in kbuild style output while building to make things more legible. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-25build: remove old SYMLINKS variableMike Frysinger
This is only used to create symlinks to out of tree files. I doubt it has any relevance anymore now that jffs2 has been merged into mainline. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25integck: fix build error (MS_DIRSYNC, MS_RELATIME)Brian Norris
Need to include <linux/fs.h>, at least for my build system. Otherwise, you can't build the 'tests'. integck.c: In function ‘parse_mount_options’: integck.c:2862: error: ‘MS_DIRSYNC’ undeclared (first use in this function) integck.c:2862: error: (Each undeclared identifier is reported only once integck.c:2862: error: for each function it appears in.) integck.c:2872: error: ‘MS_RELATIME’ undeclared (first use in this function) Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25feature-removal: remove completed tasksBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25nanddump: default to NOT dumping OOB dataBrian Norris
Since nandwrite doesn't write OOB data by default, we don't dump OOB data by default, in order to be a more proper inverse function. Remove the warnings and change the default. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25nanddump: change -o to mean --oob, not --omitoobBrian Norris
As warned earlier, we are changing the meaning of `nanddump -o' to mirror the usage in nandwrite, where -o means to include OOB (i.e., `nandwrite -o' writes data to both in-band and out-of-band areas, so `nanddump -o' should dump data from both in-band and out-of-band areas). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25nanddump: change default to --bb=skipbadBrian Norris
As promised, we change the default bad block handling method to --bb=skipbad. This works as a better inverse to nandwrite, since nandwrite skips bad blocks when writing data. And of course, we remove the warning messages. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25nanddump: kill --omitbad, --noskipbadBrian Norris
As mentioned previously, we are killing --omitbad in favor of the new --bb=skipbad option, which functions fairly similarly. Also, --noskipbad has become --bb=dumpbad, so remove the old `-N' and `--noskipbad' flags. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25punt redundant libcrc32v1.4.5Mike Frysinger
The libcrc32.a is only used in one place: mkfs.ubifs. But this also uses libmtd.a, and the only file in libcrc32.a is also in libmtd.a. So libcrc32.a itself is completely redundant. Punt! Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25mtd-utils: bump nanddump, mtdinfo version numbersBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-23nanddump: document, warn about future default --omitoobBrian Norris
To work as a proper inverse to nandwrite, nanddump must not dump OOB data by default. This patch prints a warning regarding the future change. We also suggest using the new flag, `--oob', for transitioning to the next release with new default behavior. Note that we are changing `-o' to mean `--oob' in the next release, similar to `nandwrite -o'. This is a break from previous behavior. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23nanddump: add --oob optionBrian Norris
Adds an explicit option for including OOB data in our data dump. Currently, this is the default behavior, but in the next release, the default will be to exclude OOB data. This is done to mirror the '-o' option in nandwrite. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23feature-removal-schedule: describe nanddump changesBrian Norris
Include a few notes about the edited options and new defaults for bad block handling in nanddump. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23nanddump: warn about new default BB handlingBrian Norris
In an upcoming release, we will no longer default to --bb=padbad. Instead, the default will be --bb=skipbad. This makes nanddump a better inverse operation to nandwrite. This patch prints warnings for users so that they get a chance to update their scripts before the default changes officially. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23nanddump: update help message for BB method changesBrian Norris
--noskipbad will soon be replaced by --bb=dumpbad, and --omitbad is being removed entirely in favor of --bb=skipbad. This patch adds warnings when using inappropriate configurations and adds info to the help message. Please plan to migrate to the new usages shortly. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>