| Age | Commit message (Collapse) | Author |
|---|
|
The nandtest program monitors the corrected ecc stat to determine if an
ECC correction has taken place during the last write-read. If so, it
prints "ECC corrected".
The mtd subsytem will store the number of bits corrected in the corrected
ecc stat so update the nandtest output to print also the number of bits
corrected when performing the test.
Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
The ioctl MEMSETOOBSEL hasn't existed for a long time. Using it as a
backup to MTDFILEMODE is pointless, so just remove every time it is
used.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
Move variable within conditional and remove duplicated code.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
We don't really use oobinfochanged anymore, since all the calls to the
MEMSETOOBSEL ioctls are gone. The remaining usage of it is superfluous
now, as the only case where it is changed is under the "noecc" condition
and the only case where it is tested is under the "!noecc" condition.
We also no longer need the "restoreoob" label and can instead simply
close everything done with the single remaining label, "closeall". Note
that `close(-1)' is legal, although useless.
Finally, we move `old_oobinfo' into the only block of code in which it's
used now.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
The legacy -j (--jffs2) and -y (--yaffs) options haven't been
operational for a long time, since MEMSETOOBSEL was killed. I don't
think anybody will miss these options (correct me if I'm wrong). They
can be replaced by proper usage of MTD_OOB_AUTO modes.
The -f (--forcelegacy) option went hand in hand with -j and -y. Now that
-j and -y are gone, there's no use for -f. Kill it.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
The `autoplace' option was meant to force an MTD_OOB_AUTO layout while
writing to flash. This option has not been properly supported for a very
long time, as the necessary ioctl, MEMSETOOBSEL, has been removed.
Apparently nobody uses this option. Kill it.
Other code depends on the availability of the `old_oobinfo' data, so we
move some code within a block that handles autoplacement if it's
*already* enabled. This, however, is inconsistent and should be cleaned
up shortly.
Note: this option may be re-implemented in the near future with the
addition of a new ioctl that allows on-the-fly chaning of MTD OOB modes.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
__func__ is more portable
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
enum provides a cleaner mechanism that creating single-purpose `#define`s.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
Remove extraneous spaces.
Put braces on same line as "if", "for", "switch", etc. statements.
No parentheses around return values.
Use "errmsg_die" from common.h.
Replace "exit (1)" with "exit(EXIT_FAILURE)".
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
|
|
We released mtd-utils 1.4.6 as a bug-fix release. Bump the version number
in Makefile.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
|
|
mtd-utils nandwrite.c: After a page write failure, the calculation
of the block number to erase is incorrect. The erase block size is
being passed as the erase block number in the call to mtd_erase().
Signed-off-by: Jeff Fryar <jeff.fryar@hp.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
The help message for mtdinfo is unnecessarily disjointed. It is split
into three strings which reuse the PROGRAM_NAME string inefficiently and
don't have a consistent style.
This fixup should provide a cleaner look with aligned columns and
easier-to-read source code.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
Line up columns better so that everything is more readable.
Remove "Example 1" since `mtdinfo' does not print information when not
given any arguments.
Remove "...UBI layout information" from description of Example 4, since
Example 4 (now 3) doesn't include the `-u' flag.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
We weren't very consistent in how we listed our options in the mtdinfo
help string (listing short options, long options, or both). Plus, not all
options are inter-operable, so we should distinguish this somewhat.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
This "fixes" a regression found in:
commit 266061ebd5d72391f0a0e831b018e8fc7fea68a1
mtdinfo: add regioninfo/eraseblock map display
On certain flash (NOR flash that have eraseblock region info),
`mtdinfo -a' tries to open the MTD node file, for use with the ioctl
MEMGETREGIONINFO; however, we didn't supply a device node path to
`mtdinfo -a', so it's using NULL, resulting in errors like:
mtdinfo: error!: couldn't open MTD dev: (null)
error 14 (Bad address)
For now, we can just skip dumping region_info with the `-a' flag. If we
find a better way to do this (e.g., export via sysfs, find device nodes
via automatic routines, etc.), then we can kill the workaround and this
FIXME should be removed.
The regression was first reported at:
http://lists.infradead.org/pipermail/linux-mtd/2011-July/037232.html
The result of recent changes is that we cannot get region_info for devices
via the `--all' option. We add a note in the help message warning that
mtdinfo may find more info when given a device patch, e.g., /dev/mtdX.
Reported-by: Brian Foster <brian.foster@maxim-ic.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
When cross-compiling (make CROSS=mipsel-linux-), I get this error:
rm -rf /home/norris/git/mtd-utils/mipsel-linux
find /home/norris/git/mtd-utils/mipsel-linux/ -xdev \
'(' -name '*.[ao]' -o -name '.*.c.dep' ')' \
-exec rm -f {} +
find: `/home/norris/git/mtd-utils/mipsel-linux/': No such file or directory
make: *** [clean] Error 1
Now, for cross-compiling, we've already deleted the $(BUILDDIR), so we
should check this before cleaning individual objects with "find."
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
When using "make CROSS=mipsel-linux-", I get the following errors:
/bin/sh: /home/norris/git/mtd-utils/mipsel-linux/include/version.h.tmp: No such file or directory
make: *** [/home/norris/git/mtd-utils/mipsel-linux/include/version.h.tmp] Error 1
Fix (suggested by Mike Frysinger): create the directory if it doesn't
exist. Also, $(CC) needs to be able to find the generated header in
$(BUILDDIR)/include.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
|
|
This patch "fixes" the following gcc warning:
mkfs.ubifs/mkfs.ubifs.c: In function ‘main’:
mkfs.ubifs/ubifs.h:420:2: warning: ‘child_cnt’ may be used uninitialized in this function [-Wuninitialized]
mkfs.ubifs/mkfs.ubifs.c:1735:6: note: ‘child_cnt’ was declared here
by initializing the ‘child_cnt’ to zero.
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Remove the -squash-rino-perm mkfs.ubifs option as this was planned. Remove
the corresponding record from the feature-removal-schedule.txt file.
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
We have removed the -m option, but did not remove args.mtdn which represents
the -m parameters. Kill args.mtdn as well.
Tweaked by Brian Norris.
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
According to feature-removal-schedule, we shouldn't use `-m', since
it relies on a specific device-naming pattern.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
According to "feature-removal-schedule," we kill flash_info in favor of
mtdinfo.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
More utilities now use the common VERSION system.
For utils that printed a very simple message, we use the new
common_print_version() "function."
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
To use more unified versioning and to re-use other existing code,
switch to common.h.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
First, the top-level Makefile should not tell git to ignore sub-level
.gitignore files.
Second, add simple .gitignores to ignore the executables generated under
the various `tests' subdirectories.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Some compilers will complain about use of strlen() within a static array
size declaration. For this type of string, "sizeof() - 1" is equivalent
and prevents the build error.
Error:
io_paral.c:48:13: error: variably modified 'vol_nodes' at file scope
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Depending on your compiler, size_t may or may not be long unsigned int.
Use printf's %zu format to clarify.
Warning message:
checkfs.c:524:28: warning: format '%lu' expects type
'long unsigned int', but argument 2 has type 'unsigned int'
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
The "bb_default" bool was temporarily being used to straighten out
potential issues with the changing --bb=METHOD options and to warn
users properly. Now, it's unnecessary.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
The ubi-utils/src/ subdir is tossed as it just complicates things for no
real gain. The dictionary.h header is relocated to the ubi-utils/include/
since other headers in there need it.
The top level clean is replaced with a `find -delete` on objects, so it
might prune more than necessary, but many projects now do this sort of
thing and no one complained there.
A "mkdep" helper generates the actual rule, and the variables are used
with "foreach" to expand these automatically.
The tests subdir is updated only to reflect the ubi-utils source move.
Otherwise, it is left untouched as making that non-recursive isn't really
worth the effort.
While we're gutting things, also through in kbuild style output while
building to make things more legible.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
This is only used to create symlinks to out of tree files. I doubt it
has any relevance anymore now that jffs2 has been merged into mainline.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Need to include <linux/fs.h>, at least for my build system. Otherwise,
you can't build the 'tests'.
integck.c: In function ‘parse_mount_options’:
integck.c:2862: error: ‘MS_DIRSYNC’ undeclared (first use in this
function)
integck.c:2862: error: (Each undeclared identifier is reported only once
integck.c:2862: error: for each function it appears in.)
integck.c:2872: error: ‘MS_RELATIME’ undeclared (first use in this
function)
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Since nandwrite doesn't write OOB data by default, we don't dump OOB data
by default, in order to be a more proper inverse function.
Remove the warnings and change the default.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
As warned earlier, we are changing the meaning of `nanddump -o' to
mirror the usage in nandwrite, where -o means to include OOB (i.e.,
`nandwrite -o' writes data to both in-band and out-of-band areas, so
`nanddump -o' should dump data from both in-band and out-of-band areas).
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
As promised, we change the default bad block handling method to
--bb=skipbad. This works as a better inverse to nandwrite, since
nandwrite skips bad blocks when writing data.
And of course, we remove the warning messages.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
As mentioned previously, we are killing --omitbad in favor of the new
--bb=skipbad option, which functions fairly similarly. Also, --noskipbad
has become --bb=dumpbad, so remove the old `-N' and `--noskipbad' flags.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The libcrc32.a is only used in one place: mkfs.ubifs. But this also
uses libmtd.a, and the only file in libcrc32.a is also in libmtd.a.
So libcrc32.a itself is completely redundant. Punt!
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
To work as a proper inverse to nandwrite, nanddump must not dump OOB data by
default. This patch prints a warning regarding the future change. We also
suggest using the new flag, `--oob', for transitioning to the next release
with new default behavior.
Note that we are changing `-o' to mean `--oob' in the next release,
similar to `nandwrite -o'. This is a break from previous behavior.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Adds an explicit option for including OOB data in our data dump.
Currently, this is the default behavior, but in the next release, the
default will be to exclude OOB data. This is done to mirror the '-o'
option in nandwrite.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Include a few notes about the edited options and new defaults for bad
block handling in nanddump.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
