aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-06-25nanddump: change default to --bb=skipbadBrian Norris
As promised, we change the default bad block handling method to --bb=skipbad. This works as a better inverse to nandwrite, since nandwrite skips bad blocks when writing data. And of course, we remove the warning messages. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25nanddump: kill --omitbad, --noskipbadBrian Norris
As mentioned previously, we are killing --omitbad in favor of the new --bb=skipbad option, which functions fairly similarly. Also, --noskipbad has become --bb=dumpbad, so remove the old `-N' and `--noskipbad' flags. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25punt redundant libcrc32v1.4.5Mike Frysinger
The libcrc32.a is only used in one place: mkfs.ubifs. But this also uses libmtd.a, and the only file in libcrc32.a is also in libmtd.a. So libcrc32.a itself is completely redundant. Punt! Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-25mtd-utils: bump nanddump, mtdinfo version numbersBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-23nanddump: document, warn about future default --omitoobBrian Norris
To work as a proper inverse to nandwrite, nanddump must not dump OOB data by default. This patch prints a warning regarding the future change. We also suggest using the new flag, `--oob', for transitioning to the next release with new default behavior. Note that we are changing `-o' to mean `--oob' in the next release, similar to `nandwrite -o'. This is a break from previous behavior. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23nanddump: add --oob optionBrian Norris
Adds an explicit option for including OOB data in our data dump. Currently, this is the default behavior, but in the next release, the default will be to exclude OOB data. This is done to mirror the '-o' option in nandwrite. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23feature-removal-schedule: describe nanddump changesBrian Norris
Include a few notes about the edited options and new defaults for bad block handling in nanddump. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23nanddump: warn about new default BB handlingBrian Norris
In an upcoming release, we will no longer default to --bb=padbad. Instead, the default will be --bb=skipbad. This makes nanddump a better inverse operation to nandwrite. This patch prints warnings for users so that they get a chance to update their scripts before the default changes officially. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23nanddump: update help message for BB method changesBrian Norris
--noskipbad will soon be replaced by --bb=dumpbad, and --omitbad is being removed entirely in favor of --bb=skipbad. This patch adds warnings when using inappropriate configurations and adds info to the help message. Please plan to migrate to the new usages shortly. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23nanddump: remove --skipbad, leaving --bb=skipbadBrian Norris
We are moving to unify bad block handling methods under the --bb=METHOD option. Since --skipbad has not been included in a mtd-utils release yet, we can safely replace it without a deprecation and phase-out period. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-23nanddump: add --bb=METHOD optionBrian Norris
We have too many separate bad block handling methods: --omitbad --noskipbad --skipbad On top of these, we have the default option: that bad blocks are replaced with 0xFF. These options will be unified under --bb=METHOD. The end goal will be something like: ---------------------------------------------------------------------------------------------- Old option New option Comment ---------------------------------------------------------------------------------------------- <default> --bb=padbad dump flash data, substituting 0xFF for any bad blocks --noskipbad --bb=dumpbad dump flash data, including any bad blocks --skipbad --bb=skipbad dump good data, completely skipping any bad blocks (new default) --omitbad N/A very similar to `skipbad' (DEPRECTATED) The BB options are all mutually exclusive, so we check that we do not have more than one BB option explicitly enabled on the command line by tracking whether or not a BB method has been set by the user. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
2011-06-09mtdinfo: add regioninfo/eraseblock map displayMike Frysinger
This brings the mtdinfo utility in line with the functionality of the flash_info utility. It dumps the erase regioninfo (if the devices has it) as well as showing a handy eraseblock map (if the user has requested it). The eraseblock map also shows which blocks are locked and which ones are bad. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-09mtdinfo: remove now unused ubigen infoMike Frysinger
A previous commit moved the code using this var into a diff func. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-08mtdinfo: separate out ubi information printingArtem Bityutskiy
We are going to add some more code which prints eraseblocks map, so we need to make 'print_dev_info()' a bit smaller to keep the code readable. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-08libmtd: improve mtd_islocked interfaceArtem Bityutskiy
This patch first of all, re-names 'mtd_islocked()' into 'mtd_is_locked()' since this seems to be the name Mike wanted, and it looks a bit nicer. This patch also makes 'mtd_is_locked()' print an error message if it fails. I'm not sure if it is good idea for a library to do so, but all functions do this, so it certainly _not_ a good idea to be inconsistent. However, for the special case, when the the "is locked" ioctl is not supported or is not valid for this device, we do not print an error message and return ENOTSUPP error code. Thus, the user can distinguish between real errors and non-fatal "not supported" cases. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-08libmtd: add helper funcs for getting regioninfo and locked infoMike Frysinger
This extends the libmtd with the helper functions: mtd_regioninfo: interface to MEMGETREGIONINFO mtd_islocked: interface to MEMISLOCKED Users of these functions will follow shortly ... Artem: do not print error message in mtd_islocked() Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-08jffs2: make lzo optional at build timeMike Frysinger
The external lzo dep can be a pain to deal with when cross-compiling, so make it optional for jffs2. This is useful if people aren't even using the functionality, or for quicker development. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-08flash_info: deprecateMike Frysinger
Artem: tweak the warning message Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-08ubi-utils: send help/version info to stdoutMike Frysinger
Usage/version information should go to stdout when it is expected behavior (i.e. the user requested it explicitly). This info should go to stderr only when the usage info is being shown as a result of incorrect options. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-07mtdinfo: deprecate the -m optionArtem Bityutskiy
... because mtd device node name do not have to follow the "/dev/mtd%d" pattern. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-07libmtd: use O_CLOEXECMike Frysinger
Not strictly necessary, but this is good library behavior and should carry no runtime overhead. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-07include/mtd: sync with kernelMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-07flash_info: allow people to get info on multiple devicesMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-07flash_info: convert to common.hMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-07ignore (FLAT) gdb filesMike Frysinger
Linux FLAT toolchains produce .gdb files alongside the normal program for debugging purposes (so linking to "foo" will also produce "foo.gdb"). Ignore these too. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-06flash_{lock, unlock}: fix off-by-one error for "entire device" lengthSteven Miao
This basically reverts commit 43feb39f35a9ee0ed3 which changed the full length calculation to be one less than one sector. I don't understand the logic in the commit message where it states that the length should be one sector smaller as this results in misbehavior at runtime. For example, with a mtd device with total size 0x400000 and erase block size of 0x20000 (which gives us a total of 32 sectors), this new logic results in: mtdLockInfo.start = 0; mtdLockInfo.length = 0x3e0000; /* (32 - 1) * 0x20000 */ Calling MEMLOCK/MEMUNLOCK on the device with this range leaves the last sector unchanged which is certainly not what we want. So drop this -1 part of the calculation. To look at it another way, if we only attempt to lock one sector, this calculation would end up with the .length set to 0. Calling MEMLOCK with a length of 0 does not lock the sector as this simple code shows: int main(int argc, char *argv[]) { erase_info_t e0 = { 0, 0 }, e1 = { 0, 0x20000 }; int fd = open(argv[1], O_RDONLY); ioctl(fd, MEMUNLOCK, &e1); printf("%i\n", ioctl(fd, MEMISLOCKED, &e1)); ioctl(fd, MEMLOCK, &e0); printf("%i\n", ioctl(fd, MEMISLOCKED, &e1)); } MEMISLOCKED returns 0 both times. If we change the argument to MEMLOCK to e1, then MEMISLOCKED returns 1. Signed-off-by: Steven Miao <realmz6@gmail.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-06flash_{lock,unlock}: convert to common codeMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-06flash_{lock,unlock}: merge into one utilMike Frysinger
Now that the utils have equivalent functionality, merge the two source code bases so they can't diverge in the future. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-06flash_{lock,unlock}: merge functionalityMike Frysinger
The flash_lock util has a bit of extra argument checking, and it supports a magic value of "-1" to mean "all blocks". The flash_unlock util supports automatic 2nd/3rd arguments to unlock the whole flash. It also supports multiple bases (not just hex) for selecting the range of the device to unlock. So tweak both utilities so that they have equivalent functionality again by adding the missing features to each. Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-06flash_lock/flash_unlock/flash_info: clean up styleMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-06nanddump: sort options in help message alphabetically by shortnameBrian Norris
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-06nanddump: add --skipbad option for bad blocksBrian Norris
This patch adds a new option "--skipbad" to nanddump. It is subtly different than "--omitbad". The following description was included in the help message to attempt to clarify the differences. Notes on --omitbad and --skipbad: With either option, we stop dumping data when we encounter a bad block and resume dumping at the next good block. However, with --omitbad, we count the bad block as part of the total dump length, whereas with --skipbad, the bad block is 'skipped,' that is, not counted toward the total dump length. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-06-03mkfs.ubifs: trivial: 2.6.40 -> 3.0Ben Gardiner
In commit 04665066ebedb0a31335b525fb5f19df32cb8cfe it was noted that the free space fixup feature would be available in kernels 2.6.40 or greater. Since then it has been decided that the release following 2.6.39 will be 3.0. Replace the instances of 2.6.40 with 3.0. Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-31ubi-utils: ubimkvol: fix parameters parsing regressionArtem Bityutskiy
Commit 924862c864da0b62cf93ba7abf2dc78a7e6ac48f broke ubimkvol parrameters parsing by initializing the 'error' parameter of 'simple_strtoul()' to 1 instead of 0. This patch fixes the issue. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: add some more error messagesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: print error message on errorArtem Bityutskiy
Currently pcv macro print the error message only if we are not doing power cut testing or if we have -v flag. But if we run without -v and an error happen and the error code is not EROFS/EIO, pcv() does not print anything. This patch makes it print the error message in that case as well. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: close files after creationArtem Bityutskiy
The 'file_new()' function should create a file but should not keep it open. There is a different path to open files and keep them open. This patch makes 'file_new()' close newly created files. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: make directory checking workArtem Bityutskiy
This patch makes the directory checking in case of power cut emulation actually work. There were many bugs. Basically, we cannot rely on anything unless the directory is marked as clean. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: add verbose reportingArtem Bityutskiy
Make -v switch control verbose integck output. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: always check clean dataArtem Bityutskiy
Check the clean data after every emulated power cut, not only when 'create_test_data()'/'update_test_data()' succeed. This required some minor re-work. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: introduce a helper function for dir syncArtem Bityutskiy
Add a helper 'sync_directory()' function to synchronize directories. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: print name of directory which we cannot openArtem Bityutskiy
In 'dir_check()' print name of the directory if we fail to open it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: EIO can also be return in power-cut testingArtem Bityutskiy
Currently when we are doing UBIFS power cut emulation testing we assume that EROFS is returned in case of an emulated power cut event. However, this is not true and sometimes Linux returns EIO to user-space instead. Namely, this happens when we are waiting for write-back to finish. Here is a call trace form kernel 2.6.39-rc7: Call Trace: [<ffffffff810aaa77>] filemap_write_and_wait_range+0x78/0xb1 [<ffffffff8110f34d>] vfs_fsync_range+0x38/0xd3 [<ffffffff8110f42b>] generic_write_sync+0x43/0x65 [<ffffffff810ab0c9>] generic_file_aio_write+0xaa/0xf2 [<ffffffffa02224c9>] ubifs_aio_write+0x13a/0x1a1 [ubifs] [<ffffffff810ed71f>] do_sync_write+0xcb/0x141 [<ffffffff810ee016>] vfs_write+0xb0/0x150 [<ffffffff810ee175>] sys_write+0x48/0x72 [<ffffffff813e0692>] system_call_fastpath+0x16/0x1b 'filemap_fdatawait_range()' returns hard-coded -EIO if a page write-back happens with whatever error code. Thus, this patch teaches integck to handle EIO when doing power cut emulation testing. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-27fs-tests: integck: implement MTD reattachingArtem Bityutskiy
This patch adds -m <mtdnum> option to integck and teaches integck to re-attach the MTD device to UBI in case of an emulated power cut event. This is needed for the new UBI power cut and unstable bits emulation infrastructure: when UBI emulates a power cut the only way to recover form this is to re-attach the MTD device. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20mkfs.ubifs: add "-F" option for "free-space fixup"Matthew L. Creech
This adds a superblock flag indicating that "free-space fixup" is needed, and allows it to be set by the user via the "-F" command-line option. The first time the filesystem is mounted, this flag will trigger a one-time re-mapping of all LEBs containing free space. This fixes problems seen on some NAND flashes when a non-UBIFS-aware flash programmer is used. Artem: add a bit more help text, tweaked the patch a bit. Thanks to Ben Gardiner <bengardiner@nanometrics.ca> for help. Signed-off-by: Matthew L. Creech <mlcreech@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: read all files in power cut modeArtem Bityutskiy
When we are in power cut mode read all files after re-mounting. This will check that FS recovery worked well and all files are readable after recovery. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: verify truncation only if -v option was givenArtem Bityutskiy
Currently we always verify holes when truncating, but we have -v switch for this and should do this only if -v was given. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: fsync directories as wellArtem Bityutskiy
Call 'fsync()' for directories sometimes as well, and check synchronized directories after re-mount - cound of directory entries has to be correct. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: return error if fsync failsArtem Bityutskiy
If 'fsync()' or 'fdatasync()' fail we have to return an error, but we by mistake were returning 0 (success). Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2011-05-20fs-tests: integck: fsync more oftenArtem Bityutskiy
Currently integck calls 'fsync()' very rarely - with 0.1% probability. Make this happen more often - with 1% probability. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>