aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-04-01mtd_debug: fix creation mode parameterFerenc Wagner
creat(2) expects a creation mode parameter, not an open flag. Signed-off-by: Ferenc Wagner <wferi@niif.hu> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-03-31nandtest: fix --keep argumentRadoslav Kolev
When called with the --keep argument nandtest is supposed to restore the original content after testing, but currently it doesn't. The patch below fixes the problem. Signed-off-by: Radoslav Kolev <radoslav.kolev@rnd.bg> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-03-31mkfs.jffs2: fix --enable-compressorAdrian Bunk
The short option -X was working, but the documented long option --enable-compressor was missing. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-02-18ubiattach/ubidetach: add support to attach/detach by pathMika Westerberg
Now there is a new option '-p' (or '--dev-path') that can be used to pass path to a MTD device node. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-02-18libubi: add support to attach/detach by MTD device pathMika Westerberg
struct ubi_attach_request now has additional field 'dev' that can contain path to the MTD device node in the filesystem. Also there are two new functions that are able to handle path to the MTD device node: ubi_attach() - attach MTD device by number or by path ubi_detach() - detach MTD device by path ubi_attach() works like ubi_attach_mtd() when it is passed empty req->dev, otherwise it looks up correct MTD device number based on the given device node path. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-02-15build: add option to not force largefile supportPeter Korsgaard
Not all systems have largefile support (E.G. uClibc depending on config), so unconditionally enforcing largefile breaks the build. Work around it by adding a WITHOUT_LARGEFILE flag, similar to the existing WITHOUT_XATTR. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-01-15ubiformat: boost version to 1.5v1.3.1Artem Bityutskiy
We fixed the sequence numbers bug, which is quite serious. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-01-15ubiformat: be consistent with sequence numbersArtem Bityutskiy
This commit fixes a stupid an nasty bug. When we flash an UBI image, we do not change its sequence numbers. But when we format the rest of the PEBs (beyond the flashed image), we use a random (or specified via cmdline) sequence number. As a result, we have a broken flash format and UBI refuses it, because half of it has one sequence number, another half has a different one. What we have to do instead, we have to substitute image's sequence number with ours. Reported-by: Jeff Angielski <jeff@theptrgroup.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Tested-by: Jeff Angielski <jeff@theptrgroup.com>
2010-01-15ubiformat: always initialize seq numberArtem Bityutskiy
For some reasons sequence number was set to 0 in some case, which is wrong. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-01-10ubiformat: be consistent with sequence numbersArtem Bityutskiy
This commit fixes a stupid an nasty bug. When we flash an UBI image, we do not change its sequence numbers. But when we format the rest of the PEBs (beyond the flashed image), we use a random (or specified via cmdline) sequence number. As a result, we have a broken flash format and UBI refuses it, because half of it has one sequence number, another half has a different one. What we have to do instead, we have to substitute image's sequence number with ours. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-01-10ubiformat: always initialize seq numberArtem Bityutskiy
For some reasons sequence number was set to 0 in some case, which is wrong. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-12-09ubiformat: fix error messagev1.3.0Artem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-12-09ubiformat: check that min IO size is power of 2Artem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-12-09flash_unlock: enhancing for unlocking of specified number of blocksVimal Singh
This patch enhances the flash_unlock utility to be able to do unlocking for specified blocks range. This patch also fixes calculation of 'length' as in previous patch. Say there are 240 blocks present in the device. Then: offset starts from: 0x0 and full size of device: 0x1E00000 doing: 240 * 0x20000 gives -> 0x1E00000 But last block address should be 0x1DE0000 (which spans for 0x20000 bytes, adding up to size of 0x1E00000) Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-12-08flash_lock: fix length being passedVimal Singh
This patch fixes the 'length' calculation. Making it: + mtdLockInfo.length = (num_sectors - 1) * mtdInfo.erasesize; Rather: - mtdLockInfo.length = num_sectors * mtdInfo.erasesize; Say there are 240 blocks present in the device. Then: offset starts from: 0x0 and full size of device: 0x1E00000 doing: 240 * 0x20000 gives -> 0x1E00000 But last block address should be 0x1DE0000 (which spans for 0x20000 bytes, adding upto size of 0x1E00000) Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-11-26ubi-utils: add ubirsvol to .gitignoreArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-11-26ubiformat: fix --erase-counter handlingArtem Bityutskiy
The --erase-counter option did not work and this was reproted by Darwin Rambo <drambo@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-10-24mkfs.ubifs: fix crosscompilation issuesMatthias Fuchs
This patch adds support for passing the location of the lzo library and headers. Also BUILDDIR must be referenced to find the libubi.a archive. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-10-05ubi-utils: add ubirsvol tool to resize UBI volumesArnaud Mouiche
This is nearly a copy/paste from ubirmvol. Signed-off-by: Arnaud Mouiche <arnaud.mouiche@thomson.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-28ubinize/ubiformat: improve random number seedingArtem Bityutskiy
Add current time to the PID to improve the pseudo-random number generator seeding. Also, use 'rand()' instead of 'random()', because 'srand()' is for 'rand()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-28ubiformat/ubinize: Don't randomize 0xFFFFFFFF sequence numberMichael Roth
args.image_seq is of type uint32_t and was initialized to -1 which becomes 0xFFFFFFFF in this case. Later the value -1 was used as a flag that args.image_seq should be replaced with a randomized value. With the option --image-seq (-Q) a user could provide any sequence number at will. But when the user provided sequence number was 0xFFFFFFFF this was understood effectivly as -1 and got overridden by a randomized sequence number. So this patch change the programm flow to respect the principle of least surprise and never use a randomized sequence number when the user provide one at own will. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-09-28ubiformat/ubinize: fix more 64-bit image sequence number confusionMichael Roth
The sequence number is only 32 bit as the strtoul() function. Signed-off-by: Michael Roth <mroth@nessie.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-24ubiformat: add image sequence supportArtem Bityutskiy
Similarly to ubinize, add image sequence number support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-24ubinize: fix 64-bit image sequence number confusionArtem Bityutskiy
UBI image sequence number which we store in EC headers is 32 bits, not 64-bits. I was confused when noticed that the 'image_seq' variable had type 'unsigned long long'. Turn it into a 'uint32_t' type. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-24ubiformat: fix typo in the help outputArtem Bityutskiy
The UBI image sequence number is a 64-bit integer, not 32-bit integer. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-24mkfs.ubifs: do not forget to torture PEBArtem Bityutskiy
We added PEB torturing for the case when we fail during flashing an image, but forgot to add it for the case when we are formating the flash. Add the forgottent torturing call. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-12nandwrite: allow writing the OOB when using the standard inputJehan Bing
Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-11nandwrite: fix incorrect use of errno.Jehan Bing
Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-11nandwrite: unified reading from standard input and from file - part 3Jehan Bing
Nandwrite tries to use lseek() when failing to write on a page. lseek() will fail when used on the standard input so nandwrite fails. This code replaces lseek with a buffer. When the data is read, it is put in a buffer (filebuf). This buffer is reset at each block boundary. So a "seek" just means reading from the beginning of the buffer. writebuf and oobreadbuf are now just pointers to locations in filebuf. Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-11nandwrite: unified reading from standard input and from file - part2Jehan Bing
Use the same code structure when reading the OOB than when reading the regular data. Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-11nandwrite: unified reading from standard input and from file - part 1Jehan Bing
Use same code path for reading data (not the OOB) from either the standard input or a regular file. Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-11mkfs.ubifs: correct devtable increment handlingDaniel Neukomm
With the device table one can add /dev entries to the root file system image. The device table file contains among others the fields minor, start, increment and count. If there is an entry with minor=0 start=0 increment=32 and count=4 the mkfs.ubifs makes 128 device entries, with minor numbers from 0 to 127. The correct version makes 4 entries with minor number 0,32,64,96. /dev/mtd c 640 0 0 90 0 0 2 7 This gives 14 devices /dev/mtdXX instead of 7 devices. Due to this error mtd_debug info /dev/mtd3 delivers the information of /dev/mtd1 instead of. Signed-off-by: Daniel Neukomm <Neukomm@vtxmail.ch> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-08-09jffs2dump: rewrite --help output to be more suitable for help2manTimo Juhani Lindfors
$ help2man /usr/sbin/jffs2dump | man /dev/stdin currently creates badly formatted output like -b --bigendian image is big endian -l --littleendian image is little endian -c --content dump image contents -e fname --endianconvert=fname convert image endianness, output to file fname -r --recalc- This patch modifies the --help output for jffs2dump to be more suitable for help2man and thus makes it possible to easily create manual pages that stay up-to-date. Signed-off-by: Timo Juhani Lindfors <timo.lindfors@iki.fi> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-30ubiformat: clean up help output a littleArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubinize: add sequence number supportArtem Bityutskiy
UBI now supports the image sequence number feature which prevents UBI from mistakingly accepting half-written images, if the image was written on top of an older image. Support this feature in ubinize and make it pick a random number for the UBI image sequence number. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubi-utils: update ubi-media.hArtem Bityutskiy
Update the ubi-media.h file in order to add UBI sequence number support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubi-utils: remove depricated -d optionArtem Bityutskiy
It's already about 2 years since the "-d" option was declared deprecated. UBI utils have printed a warning about this. Now it is time to kill this option completely. The affected utilities are ubimkvol, ubirmvol and ubiupdatevol. Their versions are also increased. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26common: remove depricated KB,MB,GB supportArtem Bityutskiy
KiB, MiB and GiB should be used instead. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: version 1.4Artem Bityutskiy
Increase ubiformat version to reflect the fact that now we torture PEBs before marking them as bad. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: make badblocks output less confusingArtem Bityutskiy
When ubiformat prints something like ubiformat: bad eraseblocks: 1400 it looks like there are 1400 bad eraseblock, although there is only one with number 1400. Fix this but turning the print into ubiformat: 1 bad eraseblock found, numbers: 1400 Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: nicify error outputArtem Bityutskiy
Do not print extra newline if write fails, because mtd_write prints a message and adds newline. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: minor printing clean-upArtem Bityutskiy
When a PEB is marked as bad while we are formatting, ubiformat prints 99% done at the end. Make it print 100% done instead. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: torture eraseblocks on write errorsArtem Bityutskiy
When fail to write to PEBs, and the error is EIO, torture the PEB before marking it as bad. Basically, the code is copied from the kernel UBI. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-03ubi-utils: fix compilation errors when using CPPFLAGSMike Frysinger
The CPPFLAGS in the env changes how make initializes/appends CPPFLAGS in sub-makes. This causes the old ubi utils to find the newer headers at ubi-utils/include/ before the ubi-utils/old-utils/inc/. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-30ubiformat: allow zero erase counterArtem Bityutskiy
This patch fixes the following issue: $ ubiformat /dev/mtd2 -e 0 ubiformat: error!: bad erase counter value: "0" Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-09nandwrite: fix error handlingJehan Bing
Artem Bityutskiy wrote: > Yes, write and erase failure mean that the erasblock is bad. But I think > marking a block as bad straight away is just dangerous. Who knows may be > this is a small glitch in a bus, or a software bug, or some-one > corrupted driver's memory, or whatever. This is why UBI is doing > eraseblock torturing before marking it as bad. And it is very careful > about error codes - only EIO code is considered as a reason to mark an > eraseblock as bad. Fixed broken behavior in case of write failure. More specifically: - Only try to mark a block bad if the errors are EIO. Other errors will abort the tool. - Also abort the tool if the marking fails instead of ignoring it. Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-09nandwrite: return error if failure when reading from standard inputJehan Bing
Fix nandwrite to return EXIT_FAILURE in case of error when using the standard input instead of a file for input. Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-08libubi: fix wrong size calculation with sizes > 4GiBDetlef Bardtholdt
This fixes the handling of total_bytes, avail_bytes and rsvd_bytes. The result of the multiplication must be 64 Bit. Signed-off-by: Detlef Bardtholdt <bardtholdt.detlef@ng-litef.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08nandwrite: amend loop conditionJehan Bing
If the file contains only a few bytes in the last page and the --oob option is selected, the loop may exit early (readlen < meminfo.oobsize). Most of the time it will still work though because the code tries to read the whole OOB in one chunk. Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-05ubiformat: add a TODO entryArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>