aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-05-12ubiformat: remove no-volume-table optionDavid Oberhollenzer
Using the -n or --no-volume-table flags, ubiformat can format an mtd device to a broken UBI that does not attach on recent kernel. Only very old UBIs had no volume table. This patch removes the option entirely from ubiformat. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-05-12ubiformat: process command line arguments firstDavid Oberhollenzer
If libmtd_open fails, the program always exists with failure status and prints "MTD subsystem is not present". Even `ubiformat --help` produces the same result, which is definitely undesired. This patch moves command line option processing first to get the desired behavior. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-04-16Release mtd-utils-2.0.2v2.0.2David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-04-16Fix unit-test header and file paths for out of tree buildsDavid Oberhollenzer
If we build mtd-utils outside the source path, we cannot use relative paths to refere to headers in the source tree. We have to specify absoulte paths using the top_srcdir variable. This was done right for the utility binaries, but overlooked for the unit test porgrams. This patch fixes the header paths and SYSROOT variable for the unit tests, so they build and run propperly outside the source tree. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-04-16Fix unit test mockup for oobavail sysfs fileDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-04-10misc-utils: flash_erase: Fix Jffs2 type flash erase problemXiaolei Li
Currently, Jffs2 clean marker is not written actually, because the oob write length is set to 0 when do mtd_write(). So, get OOB available size at first, and set the correct clean marker length, then program clean marker to free OOB area. Fixes: d7e86124d55b ("mtd-utils: Support jffs2 flash-erase for large OOB (>32b)") Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-04-10libmtd_legacy: Fix some function description mismatchesXiaolei Li
Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-04-10libmtd: Add support to access OOB available sizeXiaolei Li
This patch exposes OOB available size to user. Then user can use OOB free area according to OOB available size. Steps to get OOB available size: First, access /sys/class/mtd/mtdX/oobavail. If not exist, then try to get ecc layout by ioctl "ECCGETLAYOUT". If none of them work, set OOB available size to 0. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-04-05mtd-utils: ubifs: fix typo in without_lzo definitionKoen Vandeputte
Fixes: 1d04b4d5361a ("fix build when WITHOUT_LZO is set") Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-03-07mkfs.ubifs: Allow root entry in device tableDavid Engraf
When using a local root folder the permissions, user and group settings are taken from the local folder. These permissions might be incorrect if the folder has been created for the local user. Creating an UBIFS image on my local system resulted in the following output on the target: drwx------ 17 1000 1000 1264 Jan 1 00:00 . drwx------ 17 1000 1000 1264 Jan 1 00:00 .. drwxr-xr-x 2 root root 9104 May 30 2017 bin drwxr-xr-x 7 root root 2760 Jan 1 00:00 dev ... mkfs.ubifs aborts with an error message when the device table contains a root entry. This patch allows setting the root folder permissions, user and group to overwrite local configurations. Signed-off-by: David Engraf <david.engraf@sysgo.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-03-05mtd: tests: check erase block count in page testStefan Agner
When there is only a single erase block, the cross erase test does not report sensible errors. Warn in case there is only a single erase block instead of executing the test. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-02-14mtd: unittests: Stop testing stat() callsBalint Reczey
Sometimes __xstat is called instead that makes tests fragile. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-02-14mtd: unittests: Decode arg size from ioctl requestBalint Reczey
Signed-off-by: Balint Reczey <balint.reczey@canonical.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-02-14mtd: unittests: Use proper unsigned long type for ioctl requestsBalint Reczey
This fixes tests on s390x Signed-off-by: Balint Reczey <balint.reczey@canonical.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-01-30ubi-utils: ubiformat.c: convert to integer arithmeticAndrea Adami
Do not cast percent to double, it is just used as upper limit. Avoid floating point to fix compilation for aarch64 against klibc: error: '-mgeneral-regs-only' is incompatible with floating-point code | int percent = ((double)si->ok_cnt)/si->good_cnt * 100; | ^~~~~~~ Notes: * The checks in the code above this line ensure that si->good_cnt is not 0. * The code assumes si->good_cnt * 100 will not overflow, then we can use (si->ok_cnt * 100) safely because the former is bigger. * The truncated result does not affect the logic: i.e. a value of 49.9 is truncated to 49 and is still <50. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2018-01-30mtd-utils: common.c: convert to integer arithmeticAndrea Adami
We use floating point just to print out KiB, MiB, GiB. Avoid that to be klibc friendly. Fixes compilation for aarch64 against klibc: error: '-mgeneral-regs-only' is incompatible with floating-point argument | printf("%s%.1f GiB", p, (double)bytes / (1024 * 1024 * 1024)); etc. Signed-off-by: Andrea Adami <andrea.adami@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-12-05Run unit test programs through "make check"David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-22mtd: tests: Fix check on ebcnt in nandpagetestPaul HENRYS
If the number of erase blocks to use is not specified, ebcnt originally set to -1 leads the program to exit with: "Cannot run with less than two blocks." If the number of erase blocks to use is not specified and thus ebcnt is equal to -1, the expected behaviour is to perform the test on all the erase blocks of the mtd partition. This fixes the change introduced in 4458ad6481f60d9884925d5bc62a7954880d181b. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-18libscan: fix a comment typo in libscan.hRock Lee
Signed-off-by: Rock Lee <rockdotlee@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-15libmtd: fix a comment typo in dev_node2numRock Lee
Signed-off-by: Rock Lee <rockdotlee@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-03ubi-utils: ubicrc32: process command line arguments firstDavid Oberhollenzer
When a command line option is used (e.g. --version), the tool tries to open it as a file first, then *uppon success* attempts to process the command line options (including what it assumed to be an input file) which is obviously broken. This patch moves command line processing first and then attempts to open *the first unprocessed* argument. Reported-by: Uwe Kleine-König <ukleinek@debian.org> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-03nandbiterrs: Fix copy & paste failDavid Oberhollenzer
When porting some of the mtd-tests to user space, some code was simplified. Among others, a while loop that iterates of page contents was replaced with a for loop, but the old increment was left in place, so every second byte was skipped. This patch removes the erroneous second increment. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-03Enable further warning flags, address new warningsDavid Oberhollenzer
mtd_debug: Remove a duplicate if case. MTD_CAP_NANDFLASH has only one flag set (MTD_WRITEABLE). Directly below, we had a check for MTD_WRITEABLE in the else branch which can't possible ever have triggered. Checking for MTD_WRITEABLE in addition to the CAP constants was probably not intended anyway, given the check for the individual flags if all else fails. integck: We already established that "r" is less than the number of elements in the list, so the loop condition doesn't need to check if w is NULL in addition. At least this way, the compiler "gets" that w cannot be NULL below and doesn't issue warnings. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-03jittertest: Use the appropriate versions of abs()David Oberhollenzer
When passing a long argument, actually use labs(). The other case of passing a float to "int abs(int)" and casting the result to an int doesn't really make sense. Pull the cast inside the abs(). Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-02Mark or fix switch cases that fall throughDavid Oberhollenzer
Now that C++17 introduced a special fallthrough keyword for explicitly tagging switch cases that are supposed to fall through, newer gcc versions also implement a feature request from 2002 to warn about maybe unwanted fall-throughs in switch cases in other languages (like C). For C code, we can either add a gcc specific attribute at the end of the switch case, or use a special comment that gcc checks for, indicating that the fall-through behaviour is indeed intended. This patch adds a "/* fall-through */" comment at the end of various case blocks to silence gcc warnings and in some cases a break, where fall-through was probably not intended. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-02Add no-return attribute to usage() style functionsDavid Oberhollenzer
A common pattern in command line processing is having a usage() function that prints out how to use the command line options and then terminates. The function is typically used inside a switch block for command line options like `-h' or unknown options. In a lot of places, the break keyword is omitted, because the function exits anyway. However, this triggers gcc warnings about implicit fall-through. Rather than adding a phony "/* fall-through */" this patch flags the usage() style function with a gcc attribute, indicating that they do not return and removes further superfluous break statements. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-11-02Remove self-assignments of unused paramtersDavid Oberhollenzer
Use casts to void instead. Clang generates warnings about that by default. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-10-30mkfs.ubifs: ignore EOPNOTSUPP when listing extended attributesPavel Roskin
Systems that don't support extended attributes should still be able to create ubifs images. Signed-off-by: Pavel Roskin <plroskin@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-10-05tests: checkfs: Remove unused source file from makefilesDavid Oberhollenzer
The file comm.c was erroneously compiled into makefiles. This patch fixes that in the Automake file. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-10-05misc-utils: initialize "ip" in docfdisk to NULLDavid Oberhollenzer
Technically it is initializied in the for loop right before being used. From the conditional above, we know that the for loop is executed at least once and the variable is always initialized, but gcc doesn't appear to perform the same reasoning. This patch adds an initialization of the variable for the sake of making the compiler happy. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-10-05ubi-tests: io_update: fix missleading indentationDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-10-04mkfs.ubifs: Apply squash-uids to the root nodeRomain Izard
The root node of the file system needs to be handled as a special case when removing the owner information from the input. Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-08-28Add ctags files to .gitignoreUwe Kleine-König
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-08-24Release mtd-utils-2.0.1v2.0.1David Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-08-24mtd-utils: tests: Avoid using less than two blocks in nandpagetestMiquel Raynal
Forbid the use of less than 2 eraseblocks in nandpagetest. It is obvious that the test cannot run on zero block, but it cannot run on only one block neither. The reason is: get_first_and_last_block() will return the same id for both the first and the last blocks. In erasecrosstest(), the logic is: - erase/write/read/verify first block - erase/write again first block - erase *last* block - read/verify first block When using only one block, 'first' refers to the same block as 'last', leading to erasing the block before reading it. Hence, the test would fail with no actual reason. Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-08-10mtd-utils: ubinfo: add parameter checkAaron Marcher
Adds a check if the UBI device number is specified when passing a volume name as parameter. This fixes an issue, where by default an inexistent UBI device named "ubi-1" is selected because of missing checks. Signed-off-by: Aaron Marcher <me@drkhsh.at> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-07-10mkfs-ubifs: fix inclusion of uuid.hRolf Eike Beer
The include directory exported by uuid.pc is */include/uuid, so uuid.h must be included without any directory in the path. This usually works out because uuid is installed in the normal prefix, so the parent directory of what uuid has as include dir ends up in the include path anyway. In case one uses a custom uuid outside of the regular include path this breaks. Signed-off-by: Rolf Eike Beer <eb@emlix.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-07-03mtd-utils: tests: Add Erased Pages Bit Flip TestHarpreet Eli Sangha
Bit flip detection for written and erased pages tend to have different implementations. Where written pages are detected and corrected using ECC, erased pages are typically detected by ensuring that the number of zeros is less than a specified threshold. As such, it's necessary to have the 'nandbiterrs' test support the testing of written and erased pages. Bit flips in erased pages are emulated by rewriting the page in raw mode, to prevent the use of ECC. Signed-off-by: Harpreet Eli Sangha <harpreet@nestlabs.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Add const modifier to read only strings and string constantsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Silence warnings about unused argumentsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Remove unused variables and functionsDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Eliminate warnings about missing prototypesDavid Oberhollenzer
This patch eliminates warnings generated by the -Wmissing-prototypes option. With this flag set, we are now forced to have prototypes for all global, exported functions, that have to be made visible to the definitions and we are forced to mark all local functions as static. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Enable compiler warningsDavid Oberhollenzer
This patch borrows the compiler.m4 script from util-linux to check for compiler support of a number of warning flags and sets them if they are supported. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Move libfec declarations to public header in global include directoryDavid Oberhollenzer
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Use autoconf header detection correctly for libmissingDavid Oberhollenzer
AC_CHECK_HEADERS already makes sure our config header contains a HAVE_$FOO_H macro if a header was found. There is no need to awkwardly set our own Automake conditionals and check for it all over the place in the Automake files. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Restructure autoconf configure.acDavid Oberhollenzer
This patch attempts to cleanly seperate configure switches, dependency checking and generating of output files inside the autoconf configure.ac file. Also, instead of aborting immediately if a dependency is missing, the configure script now completes dependency checking and then lists ALL dependencies that are missing for the selected build options. In addtion, suggestions on how to disable some features that require the missing dependencies are printed out. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28Replace defunct ubifs_assertDavid Oberhollenzer
The ubifs assert defined in defs.h was only used in three places inside key.h and defined to never perform any checks at all. This patch replaces ubifs_assert in mkfs.ubifs with the regular libc assert macro. Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-28mtd-utils: tests: Fix nandbiterrs Failure CheckHarpreet Eli Sangha
After a page read, the old failure statistics are compared against the new failure statistics before the new values are actually read. Signed-off-by: Harpreet "Eli" Sangha <harpreet@nestlabs.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-14ubi-utils: Return error code if command line option is unknownDaniel Wagner
The tools in question will quit with an exit code 0 if the command line option was not recognized. By returning an error code a calling script has the possibility to distinguish between a real success and an invalid invocation. We need to return -1 instead of EXIT_FAILURE to be consistent with the other exit code places. Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
2017-06-14nor-utils: Return error code if command line option is unknownDaniel Wagner
The tools in question will quit with an exit code 0 if the command line option was not recognized. By returning an error code a calling script has the possibility to distinguish between a real success and an invalid invocation. Signed-off-by: Daniel Wagner <daniel.wagner@siemens.com> Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>