| Age | Commit message (Collapse) | Author |
|---|
|
Add sorting implementations, because the sorting function
is used in UBIFS linux kernel libs.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add rwsem implementations, because there are some rwsems
(eg. c->commit_sem) used in UBIFS linux kernel libs.
The rwsem is implemented based on pthread mutex.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add mutexlock implementations, because there are some mutexlocks
(eg. c->tnc_mutex, c->log_mutex) used in UBIFS linux kernel libs.
The mutexlock is implemented based on pthread mutex.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add spinlock implementations, because there are some spinlocks
(eg. c->cnt_lock, c->buds_lock) used in UBIFS linux kernel libs.
The spinlock is implemented based on pthread mutex.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add bit operations implementations, because there are some bit operations
(eg. __set_bit, test_bit) used in UBIFS linux kernel libs.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add atomic implementations, because there are some atomic operations
(eg. atomic_long_xxx) used in UBIFS linux kernel libs.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add linux kernel memory allocation implementations, because there are many
memory allocations(eg. kmalloc, kzalloc) used in UBIFS linux kernel libs.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add linux kernel error conversion definitions, because there are
many error type conversions(eg. PTR_ERR, ERR_PTR) used in UBIFS
linux kernel libs.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add linux type definitions, because there are many types
(eg. u8/u16/u64) used in UBIFS linux kernel libs. Besides
move type conversions (eg. cpu_to_le16, cpu_to_le32, etc.)
into type definitions header file.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add compiler attributes implementations, such as __packed, __unused,
__const, etc., which could be used in linux kernel libs. Besides, change
some existing attributes into linux kernel style.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Import UBIFS libs from linux kernel. Next patches will replace ubifs
related source code with implementation of linux kernel, which makes
userspace implementation be same with linux kernel, then fsck.ubifs
can resuse the code.
Notice: lpt.c is modified with [1] applied. ubifs.h and orphan.c are
modified with [2] applied, journal.c is modified with [3] reverted(
because fsck runs in a single thread, so waitqueue is not needed to
be implemented in userspace.).
[1] https://lore.kernel.org/linux-mtd/20231228014112.2836317-13-chengzhihao1@huawei.com/
[2] https://lore.kernel.org/linux-mtd/20240410073751.2522830-1-chengzhihao1@huawei.com/
[3] https://lore.kernel.org/linux-mtd/20240122063103.359501-1-chengzhihao1@huawei.com/
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
new source file
Move UBI opening/closing/volume_check_empty functions into common/super.c.
These functions will be used in fsck.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Embed new members 'dev_fd' and 'libubi' into ubifs_info structure, so
that global variable 'ubi', 'out_fd' and 'out_ubi' could be removed
from mkfs.ubifs.c. Besides, add parameter in check_volume_empty().
Next patch will extract UBI opening/closing/check_volume_empty functions
into a new source file, these functions will be used in fsck.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Embed new member 'dev_name' into 'ubifs_info' structure, then global
variable 'output' can be removed from mkfs.ubifs.c. Next patches will
import UBIFS libs from linux kernel, which could print messages that
contain device information, so this patch can distinguish different
devices according to messages.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Embed new member 'debug_level' into 'ubifs_info' structure, then global
variable 'debug_level' can be removed from mkfs.ubifs.c. Next patches
will import UBIFS libs from linux kernel, which could print messages
with different levels, then 'debug_level' can be used to control which
level messages should be printed.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Functions 'err_msg' and 'sys_err_msg' are almost same with 'errmsg' and
'sys_errmsg', since 'errmsg' and 'sys_errmsg' can print programe name,
so replace error message printing functions (ubifs-utils) with common
lib functions(include/common.h).
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
PROGRAM_NAME is defined as a const string "mkfs.ubifs", which won't be
suitable for fsck.ubifs. Add 'program_name' member in ubifs_info
structure, define PROGRAM_NAME as ubifs_info.program_name. Then, error
messages will display right program name if fsck.ubifs is supported.
Besides, add 'program_type' member in ubifs_info structure to identify
which current program type is, without comparing program name.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Header file mkfs.ubifs.h is included in other modules(eg. compr.c, lpt.c,
fscrypt.h, sign.c), decouple it out of other modules.
There are two parts in mkfs.ubifs.h:
1. common functions, for example dbg_msg, err_msg and write_leb, move
these functions into common/defs.h and common/ubifs.h.
2. devtable related definations, move them into a new header file
common/devtable.h.
Splitting common functions from mkfs.ubifs.h is also a preparation for
importing libubifs(from linux kernel) to replace current UBIFS libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Split common source files into common dir from mkfs.ubifs, this is a
preparation for importing libubifs(from linux kernel) to replace
current UBIFS libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Make sure that the first item is parsed correctly. One issue otherwise is
a null pointer dereference when the first item is not found.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Currently the read throuput test tries:
- 1 page
- 2 pages
- 1 block (64 or more pages, usually)
But it might be interesting to see how the speed gradually increases,
eg. testing all number of pages from 1 to maybe 16, and then
arbitrarilly 32 and 64.
Let's add a -C parameter to enable this additional test.
The 2-page read/write tests are also moved under this new option.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The read_eraseblock_by_2pages() has been generalized so it became
read_eraseblock_by_npages(), but there is no limitation (besides 0)
regarding the number of pages. Hence, drop the _by_page() helper and
replace it with the _by_npages(), using 'npages = 1'.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Right now there are only 2 pages that may be read continuously, but why
not trying more? At least when the continuous feature is out, this type
of benchmarking will be interesting. In order to facilitate later
additions, lets make this helper more generic and accept a global
'npages' variable as parameter (because this function is called in a
macro, it is simpler like that).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
So far speed calculations have only be done 1 page at a time or 2 pages
at a time in a block; so basically all the block was always read because
all blocks are multiple of 2. But in the future, if we want to extend
the number of pages in a single read, the final number of pages actually
read might be less than an erase block size, hence failing the throuput
calculations.
Make the number of pages in a set explicit.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
I know no device without a multiple of 2 number of pages in each
block. Even though it might be the case, it is clearly not a big deal
and we don't really care about reading the last page, we are doing a
speed benchmark; so as long as the throughput calculation knows how much
data has been read it's fine. Eitherway, I don't think we ever have
fallen in this block because we would read the content of two pages (so
one past the block) and put it in a page-wide buffer, which would
probably lead to an out-of-bound abort.
Just drop the block.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
In order to trigger a continuous read, the user needs to request at
least two pages at the same time. So far the tool would only read single
pages, so let's extend its capabilities to test continuous read output
when the -c option is passed.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
'pagesize' is used for two purposes:
- accessing the size of a page
- getting the size of the test buffer, which happen to be the size of a
page for now.
Use an intermediate variable when getting the size of the test buffer,
as we will later increase its size.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
In order to trigger a continuous read, the user needs to request more
than one data page. So far the tool would split the length into page
chunks. This is no longer the case when the -C option is passed (-c is
already used for the canonical output style).
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Using bs when skipping the bad sector is abusive as what we want is
using the size of a block and the size of a page. The fact that bs
currently is the size of a page is misleading here, has I intend to make
this amount grow.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The read buffer size happen to be as big as the bs variable, but this is
going to change. When accessing the buffer size, use a specific variable
instead.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Current rbtree implementation code is put under jffs utils, extract it
into common lib, and add more rbtree operations(eg. rb_first_postorder,
rb_next_postorder, etc.).
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Current list implementation code is put under jffs utils, extract it into
common lib, and add more list operations(eg. list_move, list_splice, etc.).
Besides, add list sorting support in new source file lib/list_sort.c.
This is a preparation for replacing implementation of UBIFS utils with
linux kernel libs.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The 'output' is allocated in get_options(), don't forget to free it
in error paths, move 'output' freeing out of close_target(), which
simplifies the logic of close_target().
Fixes: 36ec51948e0ec ("Add mkfs.ubifs")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Closing 'out_fd' is missed in handling paths in open_target(), fix it
by adding closing operations before returning.
Fixes: a48340c335dab ("mkfs.ubifs: use libubi to format UBI volume")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The libubi could be opened in get_options(), don't forget to close it
in error handling paths in main(). Also close libubi in error handling
paths in open_ubi(). To implement that, extract libubi_close() into a
new helper function close_ubi().
Besides, invoke crypto_cleanup() in error handling paths in main().
Fixes: a48340c335dab ("mkfs.ubifs: use libubi to format UBI volume")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The size of directory should be the total length of encrypted entry name,
otherwise it could trigger errors while checking filesystem:
dbg_check_filesystem [ubifs]: directory inode 89 size is 352, but
calculated size is 400
Fixes: 4c55918dd747d ("Implement filename encryption")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The type of xattr entry should be regular file, otherwise xattr entry
and xattr inode have inconsistent types.
Fixes: 50044efbd6e713 ("mkfs.ubifs: Add extended attribute support")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Variable 'cipher_name' is defined on stack without initialization, when
an user invokes mkfs with '--key' and without '-C', 'cipher_name' is a
random value, which could cause init_fscrypt_context() failed to find a
valid cipher.
Fix it by initializing 'cipher_name' as NULL when it is declared.
Fixes: cc4c5e295f546 ("mkfs.ubifs: Enable support for building without crypto")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Direct writing is not allowd on an UBI volume, unless the volume is set
with direct_write property. The open_target sets direct_write property,
don't forget to clear direct_write property for UBI volume when closing
target.
Fixes: a48340c335dab ("mkfs.ubifs: use libubi to format UBI volume")
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
PKG_CHECK_MODULES confusingly does not check to see if a static version
of the library is available.
Actually with older glibc, it might fail as lpthread needs to be passed
to linker flags (Libs.private in pc files) which can only be obtained if
--static is passed to pkg-config.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
remount_tested_fs() and recover_tested_fs() both have
almost the same code for remounting the target FS
RO then RW. Split this sequence into a new
function called remount_ro_rw().
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Link: https://lore.kernel.org/linux-mtd/5530437c-b564-461f-26af-85bde1a00cb3@huawei.com/T/#mad1d043095b3f64a1f1eddd2d87b1545e329e141
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
remount_tested_fs() and recover_tested_fs() both have
almost the same code for umount'ing the target FS and
mount'ing it back. Split this sequence into a new
function called umount_and_remount().
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Calling ubi_update_start() may fail if exclusive access to the UBI
volume cannot be established by the kernel. This is likely to happen if
an UBI volume is updated directly after creation, because current
versions of (systemd-)udevd run their internal 'blkid' also for UBI
volumes as soon as they appear (trying to read the UBIFS UUID).
There are mainly to options for this case:
1. Don't allow udevd to read UBI volumes at all (means loosing
functionatlity)
2. Wait until udevd has finished accessing a new volume (requires
cooperation with udevd)
3. Simply retry after short time in case of EBUSY
For using option 3, the documentation should state that the concrete
error code can be read via errno (this has always been the case since
libubi has been introduced).
Link: https://groups.google.com/g/swupdate/c/8NVooKjD9oo
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
fectest.c formats a struct timeval with the assumption that time_t and
suseconds_t are aliases for long, but some 32-bit systems now define
them as long long in order to support timestamps beyond 2038.
As this is an elapsed time and not a timestamp, both fields should be
within the range of long, so cast them to long before formatting
rather than moving to long long.
Signed-off-by: Ben Hutchings <ben.hutchings@mind.be>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
