summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-26libmtd: add OOB read and write interfacesArtem Bityutskiy
This patch is based on Kevin Cernekee's patch posted to the MTD mailing list. It adds 'mtd_read_oob()' and 'mtd_write_oob()' interfaces support. The interfaces use MEMREADOOB64/MEMWRITEOOB64 MTD ioctls if possible, and fall-back to MEMREADOOB/MEMWRITEOOB if the 64-bit versions are not supported. The information about ioctls support is then cashed in 'offs64_ioctls' libmtd flag. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-26libmtd: support MEMERASE64Artem Bityutskiy
This patch is base on Kevin Cernekee's patch posted to the MTD mailing list. It adds MEMERASE64 support to the 'mtd_erase()' call. Now it first tries to use MEMERASE64, and if that is not supported, falls back to the old MEMERASE ioctl. This patch also introduces an 'offs64_ioctl' flag to the libmtd descriptor. However, we cannot initialize it in 'libmtd_open()', because we need an MTD device node, which we do not have in 'libmtd_open()'. Thus, we firs mark this flag as "uninitialized", and at the first invocation of 'mtd_erase()' we initialize it. This also means that we have to pass the limbtd descriptor to 'mtd_erase()', to save the flag value. This, in turn, requires tweaking 'mtd_erase()' users. This is not very nice, but good enough so far. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-21fix parallel build between ubi-utils and mkfs.ubifsMike Frysinger
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-21nanddump: add "forcebinary" flagBrian Norris
Restrict binary dumping so that by default, binary garbage is not printed directly to a terminal. Output redicted to files or piped to other commands should not be affected (as judged by "isatty(ofd)"). A new flag "-a" or "--forcebinary" is included so that users can override this behavior if necessary. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-21nanddump: add canonical (hex+ascii) flagBrian Norris
Added the "-c" or "--canonicalprint" flag (modelled off 'hexdump -C') so that users can choose to print ASCII output next to the prettyprint output. This is really an extension to the prettyprint option, so the two options do not conflict if they are both included in the same execution. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-21nanddump: robust pretty hexdumpBrian Norris
Adapted code from the linux kernel hex_dump_to_buffer() (lib/hexdump.c) to provide a more robust hexdump for the pretty option. Now, nanddump can print out any size of OOB (or page for that matter...) without having to worry about non-multiples of 16. This also provides ability to dump ASCII format next to the hex output once additional command-line flags are added. Tested with Samsung K9GAG08U0D Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-18nandtest: Fixed indentationBrian Norris
Replaced tabs with spaces in the help message for nandtest to fix problems with varying indentation and to provide consistency with other utils in the set. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-18mkfs.jffs2: fixed warningsBrian Norris
Changed "char*" to "const char*" in certain function argument lists to prevent compiler warnings for passing a hard-coded string. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-18nanddump: increase max OOB sizeBrian Norris
Supported OOB and page sizes can now be changed more easily by a macro constant. NAND_MAX_OOBSIZE needed increased to support 218 and 224 byte OOB. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-18mkfs.jffs2: fix integer underflow in jffs2_rtime_compress()Enrico Scholz
When '*dstlen' is 0 or 1, comparison will return wrong result. Reported by valgrind as ==5919== Invalid write of size 1 ==5919== at 0x40564E: jffs2_rtime_compress (compr_rtime.c:51) ==5919== by 0x40676B: jffs2_compress (compr.c:246) ==5919== by 0x403EE4: recursive_populate_directory (mkfs.jffs2.c:884) ==5919== Address 0x4e1bdb1 is 0 bytes after a block of size 1 alloc'd ==5919== at 0x4A0515D: malloc (vg_replace_malloc.c:195) ==5919== by 0x40671C: jffs2_compress (compr.c:229) ==5919== by 0x403EE4: recursive_populate_directory (mkfs.jffs2.c:884) Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-17libs: remove ubiutils-specific stuff from common.hArtem Bityutskiy
Now include/common.h contains things that really everyone can use. And all the stuff specific to ubi-utils is in ubi-utils/include/ubiutils-common.h Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-17mkfs.ubifs: fix compilation warningArtem Bityutskiy
Fix the following warning: mkfs.ubifs.c: In function ‘add_dent_node’: mkfs.ubifs.c:1172: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 4 has type ‘ino_t’ mkfs.ubifs.c:1172: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 6 has type ‘ino_t’ Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-17libs: make crc32 and fec to be librariesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-17Add forgotten MakefileArtem Bityutskiy
My fault, forgot to run git add. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-13mtd-utils: update to latest mtd-abi.h from kernel.orgKevin Cernekee
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-07-13mtd-utils: move libmtd source files to lib/ subdirectoryKevin Cernekee
Source files for libmtd, crc32, and fec are scattered throughout the tree. Move them to a central location so they can be built into a common "libmtd.a" library used by all mtd-utils programs. This patch only renames/deletes files and does not change the content. Also modify the build system and source code so that libmtd.a can be built from a "common" location (lib/). Statically link all utilities at the top level with libmtd.a . Minor changes to mkfs.ubifs to allow using the common crc32 implementation. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-16libscan: rename hdr to echArtem Bityutskiy
... to make it clear that this is EC header, not VID header. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-test: seed the random genrator in testsArtem Bityutskiy
Add a common seed_random_generator() and make tests use it for seeding the random generator. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-tests: use rand instead of random in io_paralArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-tests: remove some junk from the integ testArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-utils: harmonize mtd device node variablesArtem Bityutskiy
Consistently use 'mtd_dev_node' to name variables consining MTD device node path. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-15ubi-utils: harmonize libmtd interface a bitArtem Bityutskiy
Let's consistently use 'mtd_num' name for MTD device number. At the moment some code uses 'mtd_num', other 'dev_num'. Harmonize that. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libubigen: make init_vid_hdr externally visibleArtem Bityutskiy
ubi-tests need it. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libubigen: move header commentsArtem Bityutskiy
To be consistent with other ubi libraries, move header comments to the .h file. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libubigen: do not create huge arrays on stackArtem Bityutskiy
Stop creating 128KiB and larger arrays on stack - allocate RAM using malloc() instead. This patch also teaches libubigen to always set errno. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libmtd: add mtd_write_imgArtem Bityutskiy
Add another helper interface which can be used to write an image to an mtd device. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14ubi-tests: add normsgArtem Bityutskiy
Just like we have in ubi-utils. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14ubi-tests: teach errmsg and failed return error codeArtem Bityutskiy
Just like we do in ubi-utils. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14ubi-tests: rename err_msg to errmsgArtem Bityutskiy
For consistency with ubi-utils. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libubi: provide mtd number in UBI device informationArtem Bityutskiy
Add an 'mtd_num' field to the UBI device information structure. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-14libubi: remove few fields from volume infoArtem Bityutskiy
Remove the 'dev_major' and 'dev_minor' fields from the volume information structure, because these fields should be provided by the device information structure. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-06-12mtd-utils: support 4096+64 page sizesEnric Balletbo i Serra
Add support for oobsize 64 and writesize 4096 in nanddump & nandwrite. Artem: some more info from further e-mail exchange: > Are there flashes with the 4096 page / 64 spare combination? Could you > refer to one? May be any URL? I thought 4096 comes with 128. Much to my regret I can't provide a URL because is not public. IGEP v2 board has a Onenand with two dice of 2048/64 spare combination but mtd views 4096/64. The minimal write page is 4K (2K from first dice and 2K from second dice). Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-05-22nandwrite: check if the start address is page-alignedStanley.Miao
Only page-aligned address is permitted in NAND subsystem. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-05-22nandwrite: fix the bug of writing a yaffs2 image to NANDStanley.Miao
The tool mkyaffs2image doesn't know the oob layout of a NAND flash, so it puts the yaffs2 tags at the offset 0 of oob area, as a result, the image generated by mkyaffs2image is different with the image dumped by nanddump. Now adding a parameter "-r" for nandwrite to differentiate these images. Write a image generated by mkyaffs2image: $> nandwrite -a -o /dev/mtd3 yaffs2.bin Write a image dumped by nanddump: $> nandwrite -a -r /dev/mtd3 image.bin Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-05-22Merge branch 'master' of git://git.infradead.org/mtd-utilsArtem Bityutskiy
2010-05-05nanddump: Support 4096+218 and 4096+224 page sizesKevin Cernekee
Tested with Samsung K9GAG08U0D. Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-05-05Merge branch 'master' of ssh://git.infradead.org/srv/git/mtd-utilsArtem Bityutskiy
2010-04-27Revert "UBI: sync ubi-user.h with the lates kernel verion"Artem Bityutskiy
This reverts commit 13b77ef356e876f42f489f6a08840e12847135c5. We do not support block devices. This patch was pushed by accident.
2010-04-08ubiattach/ubidetach: add support to attach/detach by pathMika Westerberg
Now there is a new option '-p' (or '--dev-path') that can be used to pass path to a MTD device node. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-04-08libubi: add support to attach/detach by MTD device pathMika Westerberg
struct ubi_attach_request now has additional field 'dev' that can contain path to the MTD device node in the filesystem. Also there are two new functions that are able to handle path to the MTD device node: ubi_attach() - attach MTD device by number or by path ubi_detach() - detach MTD device by path ubi_attach() works like ubi_attach_mtd() when it is passed empty req->dev, otherwise it looks up correct MTD device number based on the given device node path. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-04-08UBI: sync ubi-user.h with the lates kernel verionMika Westerberg
Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-04-08ubinfo: document the new -N optionArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-04-08ubinfo: add -N option to get info by name of ubi volumeJon Ringle
Signed-off-by: Jon Ringle <jon@ringle.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-04-01mtd_debug: fix creation mode parameterFerenc Wagner
creat(2) expects a creation mode parameter, not an open flag. Signed-off-by: Ferenc Wagner <wferi@niif.hu> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-03-31nandtest: fix --keep argumentRadoslav Kolev
When called with the --keep argument nandtest is supposed to restore the original content after testing, but currently it doesn't. The patch below fixes the problem. Signed-off-by: Radoslav Kolev <radoslav.kolev@rnd.bg> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-03-31mkfs.jffs2: fix --enable-compressorAdrian Bunk
The short option -X was working, but the documented long option --enable-compressor was missing. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-02-18ubiattach/ubidetach: add support to attach/detach by pathMika Westerberg
Now there is a new option '-p' (or '--dev-path') that can be used to pass path to a MTD device node. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-02-18libubi: add support to attach/detach by MTD device pathMika Westerberg
struct ubi_attach_request now has additional field 'dev' that can contain path to the MTD device node in the filesystem. Also there are two new functions that are able to handle path to the MTD device node: ubi_attach() - attach MTD device by number or by path ubi_detach() - detach MTD device by path ubi_attach() works like ubi_attach_mtd() when it is passed empty req->dev, otherwise it looks up correct MTD device number based on the given device node path. Signed-off-by: Mika Westerberg <ext-mika.1.westerberg@nokia.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-02-15build: add option to not force largefile supportPeter Korsgaard
Not all systems have largefile support (E.G. uClibc depending on config), so unconditionally enforcing largefile breaks the build. Work around it by adding a WITHOUT_LARGEFILE flag, similar to the existing WITHOUT_XATTR. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-01-15ubiformat: boost version to 1.5v1.3.1Artem Bityutskiy
We fixed the sequence numbers bug, which is quite serious. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-13 08:24:36 +0000