Age | Commit message (Collapse) | Author |
|
Fixes compilation on hosts with the musl C library.
Also drops the unused u_short typedef.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
In gcc 5.1, the default C standard which is used to compile a C file,
has changed from gnu89 to gnu11. This changed the meaning of 'extern
inline'. See https://gcc.gnu.org/gcc-5/porting_to.html.
In mkfs.ubifs, this leads to multiple definitions of
hashtable_iterator_key and -hashtable_iterator_value. I think the most
pragmatic way to fix the issue is to replace 'extern inline' with
'static inline' here.
Signed-off-by: Bernhard Walle <bernhard@bwalle.de>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Add support for XATTR and XREF nodes to "convert image endianness" action of
jffs2dump.
Signed-off-by: Timo Warns <timo.warns@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Add support for XATTR and XREF nodes to "dump image content" action of
jffs2dump.
Signed-off-by: Timo Warns <timo.warns@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
ioctl(MEMGETREGIONINFO) has one input parameter (regionindex) and three
output parameters (info about the erase region). There are two problems
in mtdinfo/libmtd here:
1. mtdinfo.c doesn't initialize its region_info_user struct, instead
passing uninitialized data to mtd_regioninfo()
2. mtd_regioninfo() fails to utilize the 'regidx' parameter to fill out
the regionindex parameter properly, so the garbage from mtdinfo.c is
propagated to the ioctl()
This means that mtdinfo will continuously probe the same (possibly
out-of-range) erase region, instead of looping over the valid regions.
Let's fix this in the mtd_regioninfo() helper, and at the same time,
let's zero out the mtdinfo.c buffer, as an additional precaution to keep
from using uninitialized data.
Initial error report from Yang, when running "mtdinfo /dev/mtd0" on a
Cavium 6100 board:
root@CN61XX:~# mtdinfo /dev/mtd0
mtd0
Name: phys_mapped_flash
Type: nor
Eraseblock size: 65536 bytes, 64.0 KiB
Amount of eraseblocks: 128 (8388608 bytes, 8.0 MiB)
Minimum input/output unit size: 1 byte
Sub-page size: 1 byte
Additional erase regions: 0
Character device major/minor: 90:0
Bad blocks are allowed: false
Device is writable: true
libmtd: error!: MEMGETREGIONINFO ioctl failed for erase region 0
error 22 (Invalid argument)
Eraseblock region 0: info is unavailable
libmtd: error!: MEMGETREGIONINFO ioctl failed for erase region 1
error 22 (Invalid argument)
Eraseblock region 1: info is unavailable
Reported-by: Yang Wei <Wei.Yang@windriver.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
... in order to have definitions of things like __le16.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
This file will be shared with the ubidump tool in the future.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Several commonly used macros are now defined in 'common.h', let's start using
them in mkfs.ubifs, instead of duplicating them.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
This patch adds four macros:
ALIGN, __ALIGN_MASK, min_t and max_t
to include/common.h.
Signed-off-by: hujianyang <hujianyang@huawei.com>
|
|
David Binderman <dcb314@hotmail.com> reports that the following piece of looks
wrong:
if (!args.subpage_size != mtd->min_io_size)
normsg("may be sub-page size is incorrect?");
I totally agree with him and I believe that we actually meant to have no
negation in fron to f 'args.subpage_size', so instead, the code should look
like this:
if (args.subpage_size != mtd->min_io_size)
normsg("may be sub-page size is incorrect?");
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
On legacy systems, if "/proc/mtd" doesn't exist or gives a read error,
mtd_dev_present returns -1 (since it calls legacy_dev_present), contrary
to what's specified in the header file.
This causes checks like
if (mtd_dev_present(n)) {
...
}
to give false positives. Fix this by comparing the return value to 1.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
The --reads option specifies the argument as optional, but doesn't check
for a null optarg, which means that nandtest segfaults when run as
"nandtest --reads".
Fix this by making the argument required, and changing the help text to
not specify it as optional. Argument -r already specifies the argument
as required, so we fix this inconsistency too.
Signed-off-by: Guido Martínez <guido@vanguardiasur.com.ar>
Acked-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
The current nandtest performs a simple test which consists of:
1. erase block
2. write data
3. read and verify
In order to improve the nandtest strength, this commit adds a new parameter
to increase the number of "read and verify" iterations. In other words,
the test now consists of:
1. erase block
2. write data
3. read and verify (N times)
This seem to apply more pressure on a NAND driver's ECC engine and has been
used to discover stability problems with an old OMAP2.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
This commit makes no functionality change, and simply moves the
read and compare code into a separate read_and_compare() function.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
This commit removes a redundant 'len' check, which is already performed
just after the pread call.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
An implementation of rpmatch() was backported to the 0.9.33 branch of uClibc.
So the uClibc version check introduced in commit 50c9e11f7e (include/common.h:
fix build against current uClibc) is not enough. Rename the local rpmatch()
implementation to avoid collision.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Not using the macros may be a problem when cross-compiling.
Signed-off-by: Mats Karrman <mats.karrman@tritech.se>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Commit dbe0fd17f2 (mtd-utils: new prompt() helper for talking to the user)
introduced a rpmatch() call. However, uClibc versions older than (not yet
released) 0.9.34 don't have rpmatch() implementation. Add one.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
|
|
The 'make_a_release.sh' script appears to be extremely useful - I do not
forget things as I used to anymore (amending Makefile, signing, uploading
to the FTP server, etc). It is very useful that it suggest me exact commands
which I may just copy-past to my command line.
This patch improves the script and makes it suggest the e-mail announcement
which I may just copy-paste to my command line and the announcement will
be sent using 'git send-email' command. It will include all the interested
parties in CC.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
UBI's raw flash scan actually scans for UBI data, not UBIFS data (there
*are* UBI users that are not UBIFS!), so correct the warning message.
This also matches the comment in libscan.h.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Amended by Artem.
Signed-off-by: Daniel van Gerpen <daniel@vangerpen.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
The error message is incorrect for "too small LEB size" -- we were
printing the minimum I/O size instead of the LEB size.
At the same time, let's print the max LEB size along with the message
for "too large LEB size", to be consistent and more helpful.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
With the addition of block device access to UBI volumes, we now
add a simple userspace tool to access the new ioctls.
Usage of this tool is as simple as it gets:
$ ubiblock --create /dev/ubi0_0
will create a new block device /dev/ubiblock0_0, and
$ ubiblock --remove /dev/ubi0_0
will remove the device.
Artem: slightly changed the header comment.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
The build rule for mkfs.ubifs was missing an LDFLAGS_* variable like
mkfs.jffs2 had. This prevented mkfs.ubifs from being built against
explicit external libraries which is needed when cross-compiling.
This also adds UUIDCPPFLAGS and UUIDLDFLAGS variables to support the
mkfs.ubifs build.
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
|
|
Now, the MTD_NANDFLASH stands for SLC nand, and the MTD_MLCNANDFLASH
stands for the MLC nand.
This patch includes the stdbool.h, and changes the "isNAND" to boolean type,
and checks the right nand type for the MLC and SLC nand.
If the user wants to format a MLC nand for JFFS2, we will print out a message
to warn him, and exit right now.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
In the current code, the MTD_NANDFLASH stands for both the SLC and MLC.
In the kernel, the MTD_NANDFLASH only stands for the SLC now,
so in order to keep the logic unchanged, we should also check the MLC
NAND by MTD_MLCNANDFLASH.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Use the mtd_type_is_nand_user() helper to check if it is a NAND
(including SLC/MLC).
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
The helper is for user applications, and it is just a copy of
the kernel helper: mtd_type_is_nand();
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
The MTD_MLCNANDFLASH case is missed in the current code.
This patch adds it.
Signed-off-by: Huang Shijie <b32955@freescale.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
This already has a --size option for controlling how many bytes to read
from the input. Add a --skip option to control the offset into the input
too. This way people don't have to do `dd | ubiupdatevol`.
While we're here, I've fixed the types used with args.size and the read
loop so that they can hold the right sizes (like setting a 32bit+ size).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
This is a delta between v1 and v2 of the patches. I pushed v1 instead of
picking v2, and this is a fixup.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
If you have a file image and want to copy sub-portions out and into
NAND, there's no easy way to do that. You can use dd to extract it
to a temp file, or pipe it to nandwrite 1 page at a time. Both suck.
Add two new flags to explicitly set the size and offset of the input
file. Seeking stdin isn't currently supported as I'm not sure it's
necessary. It wouldn't be hard to add though...
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
We use 'int' in many places to represent offsets/sizes. That obviously
does not play well with larger NAND devices on 32bit systems. Instead,
use the right type as needed:
- long long to represent the length of the image
- use fstat() rather than lseek();lseek(); to get the length of the image
- use size_t/ssize_t when working with read()
- tweak the printf formats as needed
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
We should send the output to stdout when the user passes -h/--help
and then exit(0), but otherwise the output should go to stderr and
then exit(1).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
These call sites either assume there is no failure (they deref the
pointer right away), or the exit themselves. Use xstrdup() instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Sometimes I want to re-initialize an existing ubifs, but the tool
currently bails out if the volume is already formatted. Prompt the
user instead so they can decide.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
We've got a few tools that prompt the user for "yes/no" questions.
Add a common helper to simplify the various implementations.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
A bunch of utils are relying on _GNU_SOURCE already. The new prompt code
uses getline() which is now part of POSIX, but in older versions of glibc,
it was behind _GNU_SOURCE as it was a GNU extension.
This change doesn't actually tie us to glibc. Only code that uses GNU
extensions does that. It just kills warning when using older versions of
glibc.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Building with linux-headers-3.9 and glibc-2.17 fails like so:
In file included from summary.h:15:0,
from jffs2dump.c:37:
/usr/include/linux/uio.h:16:8: error: redefinition of 'struct iovec'
struct iovec
^
In file included from /usr/include/bits/fcntl-linux.h:38:0,
from /usr/include/bits/fcntl.h:61,
from /usr/include/fcntl.h:35,
from jffs2dump.c:25:
/usr/include/bits/uio.h:43:8: note: originally defined here
struct iovec
^
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
We already have a helper header for swapping bytes as needed, so cut
the ftl tools over to that rather than re-implement things.
I don't actually have any devices with this kind of flash, so I can't
runtime test it. But things *look* ok to me :).
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Drop duplicate "and the", and tweak grammar slightly.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Saves a syscall.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
In the problem above I've spend several hours waiting for the issue to
appear, only to had the 'luck' that it was found in a file whose name was
256 bytes in length, resulting in the write to fail. Closer examination
showed that the buffer to store the path was 256 bytes in length, but this
buffer also includes /tmp and the read/write suffix and should be able to
contain a filename which is up to 255 bytes (NAME_MAX in linux/limits.h)
in size which is a bad fit. So that array is modified to FILENAME_MAX
(stdio_lim.h) and some checking is added to truncate the filename should
it cause an overflow.
The following log shows the first patch in action (see the correct seed),
and shows why this third patch is needed:
<quote>
integck: File Data:
integck: Offset: 0 Size: 1 Seed: 5008310 R.Off: 0
integck: 1 writes
integck: ============================================
integck: Write Info:
integck: Offset: 0 Size: 1 Seed: 5008310 R.Off: 0
integck: Offset: 0 Size: 1 Seed: 8246352 R.Off: 0
integck: Offset: 0 Size: 1 Seed: 5078796 R.Off: 0
integck: Offset: 0 Size: 1 Seed: 2267087 R.Off: 0
integck: Offset: 0 Size: 1 Seed: 3602680 R.Off: 0
integck: 5 writes or truncations
integck: ============================================
integck: Saving /tmp/yqcnfygfitaatyeyvffrguegcdttamcnyhowhgieljfuxfipiljsjcbluaeaghwyinkggommsbwnmvekihgnwgiibccpbwfrpxuxwkmnyghnutrudienngxwgorudbskedaaekiuiyqksfazrwzfwbfhzjjqoiulebtlpbfiuffmsnguqkjzqjqizimsmhbqqagaebjdhqwmzdxghiavtcxubegawlgtvstuqurkurpnrckjfkgostdtpg.integ.sav.readn
integck: error!: condition 'w_fd != -1' failed in save_file() at integck.c:1445
integck: error 36 (File name too long)
</quote>
Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
the errors
See my problem description int the previous commit, the point is that integck
in file_check_data reads a buffer, and then checks if the data is correct, it
will do a seek(0), and reread from the same fd. The point is that in the
scenario I observed integck failed (due to a buffer mismatch) but the it saved
(and what was in flash) was actually correct. So I modified this function to
dump the buffers to stderr at the moment an error is found.
Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
<quote>
integck: File Data:
integck: Offset: 0 Size: 196 Seed: 5999877 R.Off: 0
integck: Offset: 196 Size: 33 Seed: 4160795 R.Off: 0
integck: Offset: 229 Size: 1252 Seed: 8070052 R.Off: 0
integck: Offset: 1481 Size: 612 Seed: 4160795 R.Off: 1285
integck: Offset: 2093 Size: 6 Seed: 6946586 R.Off: 0
integck: Offset: 2099 Size: 536 Seed: 4160795 R.Off: 1903
integck: Offset: 2635 Size: 1562 Seed: 9845455 R.Off: 0
integck: Offset: 4197 Size: 80 Seed: 702818 R.Off: 0
integck: Offset: 4277 Size: 115 Seed: 9845455 R.Off: 1642
integck: 9 writes
integck: ============================================
integck: Write Info:
integck: Offset: 826 Size: 357 Seed: 5908448 R.Off: 0
integck: Offset: 4197 Size: 80 Seed: 702818 R.Off: 0
...
</quote>
And I would expect the file data listing to include at offset 826 something
with a size of 357 and a seed of 5908448. Clearly it is not there (which
is already extremely confusing). The point is that file_write_info first
updates the raw_write, then verifies the data (passing the new write)
and only after that updates the write structure. But in file_check_data
only the newly written data is verified (passed as an argument) whilst
the save_file() function to dump the file uses the raw_writes to recreate
the written data (while raw_writes is only updated after after this check
would have succeeded). Several lines to say that in this patch the verify
only gets called _after_ the datastructures are updated.
Signed-off-by: Elie De Brauwer <eliedebrauwer@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
I'm not aware of any chip having a write size bigger than 2048 today.
Still checking for that instead of a sleeping problem to bite us maybe
in a few years is easy.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
When doing something like:
{ printf "\xff"; printf "\xfe"; } | flash_otp_write -u /dev/mtd0 0
flash_otp_write might see only a single byte when reading from stdin for
the first tim. In this case (and without this patch) it pads to
$writesize with '\xff's and writes that out. In the next iteration it
reads the 2nd byte, pads and writes again. So the 2nd byte is written to
offset $writesize instead of 1.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|