| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
chdir() returns negative value in case of error.
fscanf() returns amount of successfully parsed parameters.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The sys_errlist[errno] is deprecated. We should use strerror(errno) instead.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
There are two warnings:
- strlen() is used without prototype
- argument of printf() is unsigned long, but used specifier is for int
This patch fixes them.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Artem: this is jut a clean-up, no functional changes.
Signed-off-by: Andy Shevchenko <ext-andriy.shevchenko@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
When reading and writing OOB we specify the address as absolute
offset from the beginning of the MTD device. This offset is
basically an absolute page offset plus the OOB offset. And it does
not have to be aligned to the min. I/O unit size (NAND page size).
So fix the 'do_oob_op()' function and remove incorrect checking
that the offset is page-aligned. This check leads to the following
errors:
libmtd: error!: unaligned address 2, mtd0 page size is 2048
But obviously, the intent was to write to offset 2 of the OOB area
of the very first NAND page.
Instead of that incorrect check, we should check that the OOB offset
we write to is within the OOB size and the length is withing the OOB
size. This patch adds such check.
Reported-by: Kelly Anderson <kelly@silka.with-linux.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Tested-by: Kelly Anderson <kelly@silka.with-linux.com>
|
|
The integck tests re-mounts the file-system from time to time
and checks the integrity afterwords. And it re-mounts always
the same-way: unmount and then mount R/W back. However, it is
better to do it differently some times, e.g.:
* re-mount R/O then re-mount R/W
* unmount then mount R/W
* both of the above
* unmount, mount R/O, then re-mount R/W
* etc.
This will give better test coverage. This patch does exactly
that by improving the 'tests_remount()' function.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Fix the following compilation warning:
perf.c: In function ‘perf’:
perf.c:144: warning: format ‘%lld’ expects type ‘long long int’, but argument 2 has type ‘int64_t’
by adding a (long long int) cast.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Fix the following compilation warnings:
test_1.c: In function ‘test_1’:
test_1.c:67:4: warning: format ‘%llu’ expects type ‘long long unsigned int’, but argument 3 has type ‘uint64_t’
test_1.c:88:3: warning: format ‘%llu’ expects type ‘long long unsigned int’, but argument 3 has type ‘uint64_t’
The fix is to cast the argument with (unsigned long long).
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Implement the feature which we planned long time ago - make nanddump
fail if the -s parameter is not NAND page-aligned. Also bump nanddump
version.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
As we have planned, make --nosquash-rino-perm option to be the
default. Deprecate both options at the same time and print a
warning if they are used. Later we can remove them
Also, bump mkfs.ubifs version number.
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Commit a8801d8 (unify flash_erase and flash_eraseall) changed the
flash_erase interface in a backwards incompatible way. Before that
commit start position was given in bytes, and now it must be provided
in blocks.
While I agree the new interface is nicer, we shouldn't break the
interface. I have scripts that expect the old behaviour, and I'm
most likely not alone, so change the interface back to the old
way.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Write only oob part goes different path in nand_base.c, it is better
to have userland program so that we could easy debug this path when
the write only oob fail like the mtd_oobtest in mtd_test suit.
Signed-off-by: Lei Wen <leiwen@marvell.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
We must use "long long" and "unsigned long long" types when
implementing the functions "simple_strtoll()" and "simple_strtoull()",
respectively. This prevents casting/truncation errors on systems where
"long" is not the same size as "long long" (that is, on most systems).
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Fix the repeated nodes with the same primary name in device_table.txt.
They were not generated correctly.
/dev/tty c 666 0 0 5 0 0 0 -
/dev/tty c 666 0 0 4 0 0 1 6
# IDE Devices
/dev/hda b 640 0 0 3 0 0 0 -
/dev/hda b 640 0 0 3 1 1 1 15
/dev/hdb b 640 0 0 3 64 0 0 -
/dev/hdb b 640 0 0 3 65 1 1 15
Only created,
/dev/tty
/dev/hda
/dev/hdb
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The counting was incorrect. Follow that of mkfs.ubifs.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
errmsg_die() should be nearly the equivalent of the error message used
here. This saves a few lines.
Also edited the error message to include the offending option and got
rid of the quotes.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Includes error messages for negative blockalign, telling the user what
the offending option and value were.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The mtd-descriptor attributes contain signed data, not unsigned.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Includes error messages for negative device offsets and negative lengths,
telling the user what the offending option and value were.
Previous patch left out the "negative" in the error message.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
For consistency between nanddump and nandwrite and in order to provide
better means for checking for negative inputs, the "offset" and "length"
types in nanddump should be changed to signed integer types. This also
solves a signed/unsigned comparison warning.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
A do-while loop in pretty_dump_to_buffer() can be refactored into a
single sprintf() statement. MAX() and MIN() are used to ensure that:
(1) We have at least a single space between hex and ASCII output
(2) We don't overflow the line buffer
This patch was suggested by Mike Frysinger.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Add MAX() macro to common.h, to be used in future patches.
Also a style change in comma location on MIN().
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Per Mike Frysinger's suggestion, we check for strtoll() and strtoull()
errors by using the "common.h" helper functions simple_strtoll() and
simple_strtoull().
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
legacy_get_dev_info() forgot to set the OOB size
Signed-off-by: Ketil Froyn <ketil@froyn.name>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Change type off "offs" for type consistency of 64-bit data types. The
"loff_t" type is no longer needed for the MEMGETBADBLOCK ioctl since
it isn't called dirently anymore - this is handled by mtd_is_bad().
Also change an accompanying printf().
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Several ioctls are replaced with libmtd calls which should give us 64-bit
support for large devices. libmtd mostly provides drop-in replacements
for the functionality we need. However, when we require erasure of a
badly-written block, mtd_erase() only erases a single block, whereas
MEMERASE could erase a larger region. In nandwrite, we may have a "virtual
blocksize" of more than one (when blockalign > 1). Thus, I added a loop
for this case.
The mtd_oob_buf struct is no longer needed, nor is "erase_info_t".
Error messages for the new libmtd calls reflect the style found in
flash_erase.
Tested with nandsim and with NAND chips up to 4GB in size (I don't have
a device that truly requires 64-bit addressing yet).
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
For large block- and page-sizes, the multiplication of ebsize_aligned
and pagelen can overflow a 32-bit integer. This overflow can be
prevented by a simple change in order of operations (i.e., do division
first).
Since ebsize_aligned is always a multiple of mtd.min_io_size, this
produces no change in results.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Commit 07005d915d6a79dbdee14b0c4360df5058c3a98b made changes to the
buffer allocation in nandwrite and did not handle all affected code
areas properly. In particular, we were assigning:
oob.ptr = noecc ? oobreadbuf : oobbuf;
However, since oobreadbuf and oobbuf are declared dynamically, they
are NULL at this point. If they aren't properly assigned later, we
unwittingly are passing a NULL pointer as oob buffer.
This assignment line is best moved after the buffer allocations and
pointer assignment.
Effects of this problem can be seen when writing oob data with the "-o"
flag and without the "-n" flag:
$ ./nandwrite -o /dev/mtd0 img.bin
Writing data to block 0 at offset 0x0
ioctl(MEMWRITEOOB): Bad address
Data was only partially written due to error
: Bad address
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
To support large NAND devices, we need 64-bit data types for
write offsets. This patch makes data type changes along with
their corresponding printf() formats and the input conversion
(i.e., use "strtoll()" instead of "strol()").
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Begin utilizing libmtd for MTD operations: use mtd_get_dev_info() to return
a more detailed set of information about our MTD. Most importantly, libmtd
will yield a 64-bit "size" parameter. This is necessary to properly detect
devices larer than 4GB.
printf() arguments needed reformatted for the new mtd_dev_info data types.
In addition, the printf() was restructured to keep lines shorter.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The text of a printf() states that we're printing OOB area, but the
corresponding argument passes writesize. That probably wasn't the intent.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Due to the presence of the "--block-align" flag, nandwrite uses a
blocksize throughout that, depeding on the execution parameters, may
not be the actual erasesize of the NAND flash. In order to clarify
this situation for the untrained viewer of nandwrite's code, we should
not change the value of "meminfo.erasesize" itself; rather, we can
utilize a separate, calculated "ebsize_aligned". Then, when a user
actually wants to refer to the physical erasesize, it's straightforward.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Comment on "blockalign" default value is incorrect; it only defaults
to a 1x multiplier of the actual block size. Perhaps this is a relic
of early NAND where all block sizes were 16KB?
Reformatted a multi-line comment.
Changed separete "if" statements to a combined "if-else-if" since they
were logically combinable. Should have no effect on results with minor
effect on efficiency.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
We should allow the dump length to be 64-bit, especially since the value
was read in as a "long long" by strtoll().
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
This patch heals 'make install' which tried to install the utilities
to '/usr/local//usr/sbin'.
Reported-by: Charles Manning <manningc2@actrix.gen.nz>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The short option for specifying the count of erase blocks for orphans '-p'
was not detected due to a typo.
Signed-off-by: Vivenzio Pagliari <vivenzio.pagliari@gmx.de>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Adds support for 64-bit offsets (i.e., devices larger than 4GB).
Utilizes the "unsigned long long" data type as the standard type
for 64-bit offsets throughout. Reformats a few printf statements
to avoid casting and to properly handle "long long."
Calls to ioctls are mostly replaced by libmtd interfaces (which should
choose the proper ioctls for us); however, a few remain and probably
should be handled with more robust interfaces, as some of these
ioctls are considered "legacy."
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
There were some signed/unsigned integer comparisons. Their types were
changed for safety. Also, "strtol" was improperly used for unsigned
data types.
Nanddump's pretty print options needed a slight reformat to prepare for
printing offsets that are more than 32 bits (8 hex characters) wide.
This prevents overlap of output and ensures that at least one space is
printed between hex and ascii printouts. Perhaps this could use some
better alignment in the future.
Other fixes:
* Corrected several simple spacing issues
* Changed indentation of some global variable declarations in
order to prepare for the next patch, which makes those
declarations longer
* Used macro for PRETTY_ROW_SIZE instead of constant 16
* Reformatted, edited a multi-line comment
* Removed some unnecessary casts
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
nanddump should be consistent with nandwrite, which does not accept non page
aligned start addresses. Thus, non page aligned dumps are useless.
To ease migration only warn for now. Add the plan of making this an error to
feature-removal-schedule.txt.
Tweaked by Artem.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Need to use unsigned arithmetic and a 64-bit cast in order to
calculate and output the correct offset for eraseblocks at large
offsets. Signed integer arithmetic does not produce the correct
result "uint64_t" result, so for offsets over 2GB we get
messages like:
Erasing 512 Kibyte @ ffffffff83180000 -- 4308642136 % complete.
Note that this error was not affecting proper erasure; it just
produced incorrect status messages.
Also, we should not add an extra eraseblock for the final status
message; this gives misleading output when, for example, the
following statement is executed:
$ flash_erase /dev/mtd0 0 1
Erasing 512 Kibyte @ 80000 -- 100 % complete
We aren't erasing at offset 0x80000; it should display offset 0.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Dynamic allocation of the oob buffer provides the necessary
support for removing the oob size check. Now, new unknown OOB
sizes can be handled correctly (for example, 8KB page + 448B
OOB).
Included common.h for the use of xmalloc.
Memory freeing should occur on "restoreoob" as well as on
"closeall."
[Conflicts resolved by Artem]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
The buffers used for dumping page and OOB data needed dynamic
allocation to help eliminate burdens for updating (i.e., every
time there's a new OOB size we don't have to increase the sizes).
Also, there is no need to check flash chips for "standard sizes."
With recent changes to the printing codebase, we should be able to
handle arbitrary sizes with no problem.
More exit operations are now necessary on program failure, so
"goto closeall" is used more liberally.
Also, common.h is included for the use of xmalloc.
[conflicts fixed by Artem]
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Check the first block even when start_addr is not eraseblock aligned.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
When dumping oob data of a bad block, initialize oobbuf with 0xff, instead of
readbuf. This avoids bogus oob data on output.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
