summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-07-26common: remove depricated KB,MB,GB supportArtem Bityutskiy
KiB, MiB and GiB should be used instead. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: version 1.4Artem Bityutskiy
Increase ubiformat version to reflect the fact that now we torture PEBs before marking them as bad. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: make badblocks output less confusingArtem Bityutskiy
When ubiformat prints something like ubiformat: bad eraseblocks: 1400 it looks like there are 1400 bad eraseblock, although there is only one with number 1400. Fix this but turning the print into ubiformat: 1 bad eraseblock found, numbers: 1400 Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: nicify error outputArtem Bityutskiy
Do not print extra newline if write fails, because mtd_write prints a message and adds newline. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: minor printing clean-upArtem Bityutskiy
When a PEB is marked as bad while we are formatting, ubiformat prints 99% done at the end. Make it print 100% done instead. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-26ubiformat: torture eraseblocks on write errorsArtem Bityutskiy
When fail to write to PEBs, and the error is EIO, torture the PEB before marking it as bad. Basically, the code is copied from the kernel UBI. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-07-03ubi-utils: fix compilation errors when using CPPFLAGSMike Frysinger
The CPPFLAGS in the env changes how make initializes/appends CPPFLAGS in sub-makes. This causes the old ubi utils to find the newer headers at ubi-utils/include/ before the ubi-utils/old-utils/inc/. Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-30ubiformat: allow zero erase counterArtem Bityutskiy
This patch fixes the following issue: $ ubiformat /dev/mtd2 -e 0 ubiformat: error!: bad erase counter value: "0" Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-09nandwrite: fix error handlingJehan Bing
Artem Bityutskiy wrote: > Yes, write and erase failure mean that the erasblock is bad. But I think > marking a block as bad straight away is just dangerous. Who knows may be > this is a small glitch in a bus, or a software bug, or some-one > corrupted driver's memory, or whatever. This is why UBI is doing > eraseblock torturing before marking it as bad. And it is very careful > about error codes - only EIO code is considered as a reason to mark an > eraseblock as bad. Fixed broken behavior in case of write failure. More specifically: - Only try to mark a block bad if the errors are EIO. Other errors will abort the tool. - Also abort the tool if the marking fails instead of ignoring it. Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-09nandwrite: return error if failure when reading from standard inputJehan Bing
Fix nandwrite to return EXIT_FAILURE in case of error when using the standard input instead of a file for input. Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-08libubi: fix wrong size calculation with sizes > 4GiBDetlef Bardtholdt
This fixes the handling of total_bytes, avail_bytes and rsvd_bytes. The result of the multiplication must be 64 Bit. Signed-off-by: Detlef Bardtholdt <bardtholdt.detlef@ng-litef.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-06-08nandwrite: amend loop conditionJehan Bing
If the file contains only a few bytes in the last page and the --oob option is selected, the loop may exit early (readlen < meminfo.oobsize). Most of the time it will still work though because the code tries to read the whole OOB in one chunk. Signed-off-by: Jehan Bing <jehan@orb.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-05ubiformat: add a TODO entryArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-05mkfs.ubifs: inclreas version to 1.3Artem Bityutskiy
... because of the previous serious bug-fix. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-05mkfs.ubifs: fix brown paper-bag bugArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-06-02libmts: recognize pre-MTD-sysfs kernels betterArtem Bityutskiy
Not-so-old linux kernel like 2.6.29 do already have "/sys/class/mtd/mtdX" directories, while very old kernels do not. But in 2.6.29 these directories do not contain any information. Anyway, the logic in libmtd which checked whether the system supports sysfs was broken, because it assumed that old systems do not even have "/sys/class/mtd/" directory. Fix this problem by checking for "/sys/class/mtd/mtdX/name". If this is present - the system really has sysfs support. This patch also adds an extra print to libmtd. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-27mkfs.ubifs: use libubi to format UBI volumeCorentin Chary
libubi is now used to format directly UBI volume. Typing mkfs.ubifs /dev/ubi0_0 is now possible. dtypes should be ok as they are taken from UBIFS code. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-25mkfs.ubifs: remove duplicated codeCorentin Chary
ino->uid = cpu_to_le32(st->st_uid); ino->gid = cpu_to_le32(st->st_gid); was present twice. Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-11ubi-utils: fix memory corruptionsArtem Bityutskiy
This patch contains changes similar to the ones in the previous patch. Also, it changes all invocations of memset and makes sure the argument is 0, not '\0', because memset expects int, not char. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-11libubi: fix multiple memory corruptionsCorentin Chary
The memset is obviously wrong, and valgrind tells use there are some uninitialised bytes used after read() Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-11libubi: add ubi_is_mapped() functionCorentin Chary
Signed-off-by: Corentin Chary <corentincj@iksaif.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-11mkfs.ubifs: fix -U option handlingKevin Cernekee
The long form (--squash-uids) is correct, but the short form (-U) is not. Signed-off-by: Kevin Cernekee <kpc.mtd@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-11ubi-utils: add sysfs interface support and new toolArtem Bityutskiy
This large commit makes several things. 1. Switches libmtd to use the new sysfs interface 2. Implements new handy 'mtdinfo' utility 3. Does minore amendmends in libubi and some ubi-tools. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-11ubi-tests: add .gitignore fileArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08ubi-tests: improve io_paral testArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libubi: add ubi_leb_unmap interfaceArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libubi: add ubi_set_property interfaceArtem Bityutskiy
This is needed for io_paral test.
2009-05-08libmtd: make type_str to be an arrayArtem Bityutskiy
This is a prepearation to the coming sysfs interface support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libmtd: rename num fieldArtem Bityutskiy
This is a preparation for the coming sysfs support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libmtd: rename rdonly fieldArtem Bityutskiy
This is a preparation for the coming sysfs support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libmtd: rename allows_bb fieldArtem Bityutskiy
This is a preparation for the coming sysfs support. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08mtd-utils: minor amendments in crc32.hArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libubigen: add missing includeArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08ubi-tests: various changesArtem Bityutskiy
Mostly improvments in io_paral. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-08libubi: do not use udevsettleArtem Bityutskiy
Not sure why, but udevsettle does not work when threads are used. In the io_paral test I experience the problem when udevsettle opens UBI volumes and prevents tests to open them (EBUSY is returned). Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-07ubi-tests: make tests compile againArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-05-07ubiformat: fix build errorArtem Bityutskiy
src/ubiformat.c: In function ‘main’: src/ubiformat.c:741: error: too many arguments to function ‘libubi_open’
2009-05-07ubi-utils: remove debugging leftoversArtem Bityutskiy
Remove -g -O0 which I accidentally introduce. Sorry for that. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-22libubi: improve errors handlingArtem Bityutskiy
Improve comments about what is returned if UBI device or node does not exist. Better check for ENODEV error code. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-22libubi: improve libubi_open interfaceArtem Bityutskiy
Remove the not very nice @required parameter, and add a possibility to distinguish between real errors and a situation when UBI is not present. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-20libmtd: rename mtd_infoArtem Bityutskiy
Rename 'struct mtd_info' to 'struct mtd_dev_info' to reflect the fact that it provides information about a specific MTD device. Also, this is more consistent with libubi. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-20libmtd: rename mtd_get_infoArtem Bityutskiy
Rename 'mtd_get_info()' into 'mtd_get_dev_info()' to be consistent to libubi. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-20ubi-utils: rename ubi_node_typeArtem Bityutskiy
Re-name the 'ubi_node_type()' function to a more meaningful name: 'ubi_probe_node()'. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-20ubinfo: handle -d correctlyArtem Bityutskiy
Fix ubinfo utility and make it handle -d parameter correctly. Without this patch it simple refuses working with -d. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-20Prevent git-clean from removing cscope filesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-18ubiformat: increase version to 1.2Artem Bityutskiy
The previous patch fixed a nasty bug, so it is nice to increase program version to reflect that. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-18ubiformat: fix segfault and messagesArtem Bityutskiy
ubiformat segfaults like this: ubiformat: mtd0 (NAND), size 134217728 bytes (128.0 MiB), 16384 eraseblocks of 16384 bytes (16.0 KiB), min. I/O size 512 bytes libscan: scanning eraseblock 8191 -- 100 % complete ubiformat: 8190 eraseblocks have valid erase counter, mean value is 9 ubiformat: 2 eraseblocks are supposedly empty ubiformat: warning!: VID header and data offsets on flash are 512 and 1024, which is different to calculated offsets 256 and 512 ubiformat: use new offsets 512 and 1024? (yes/no) no Segmentation fault The reason is that volume table size is calculated for 256/512 layout, and when user chooses 512/1024 - it is not re-calculated which leads to segfault in 'ubigen_write_layout_vol()'. This patch also fixes the message - in the above output new offsets are 256/512, not 512/1024. Also, this patch adds explicit printing of the selected positions. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-18libmtd: amend interfaceArtem Bityutskiy
Remove the fd field from the mtd information data structure, because libmtd does not really know the device node file name, and serves only as a place to save the descriptor. The callers should find a better place. This patch improves code readability and prepares for further changes. Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-18libubi: remove unnecessary header filesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2009-04-18libubi: amend included header filesArtem Bityutskiy
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
generated by cgit v1.2.3 (git 2.39.1) at 2024-05-29 04:39:38 +0000