| Age | Commit message (Collapse) | Author |
|---|
|
Inject powercut while doing fsstress on mounted UBIFS for kinds of
flashes (eg. nand, nor).
This testcase mainly makes sure that fsck.ubifs can make UBIFS image
be consistent on different flashes (eg. nand, nor). Because the
min_io_size of nor flash is 1, the UBIFS image on nor flash will be
different from nand flash after doing powercut, so we need make sure
fsck.ubifs can handle these two types of flash.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Do fsstress and fsck, check whether there are any files(and their data)
are lost after fsck. This testcase mainly checks whether fsck.ubifs could
corrupt the filesystem content in common case.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Authenticated UBIFS image is not supported in fsck, add testcase
to check that.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This is a preparation for adding testcases for fsck.ubifs and
mkfs.ubifs. Add some common functions, for example: powercut,
load_mtdram, mount_ubifs, encryption operations, etc.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Add basic process code for fsck.ubifs. There are following modes for fsck:
1. normal mode: Check the filesystem, ask user whether or not to fix
the problem as long as inconsistent data is found during fs checking.
2. safe mode: Check and safely repair the filesystem, if there are any
data dropping operations needed by fixing, fsck will fail.
3. danger mode: Answer 'yes' to all questions. There two sub modes:
a) Check and repair the filesystem according to TNC, data dropping
will be reported. If TNC/master/log is corrupted, fsck will fail.
b) Check and forcedly repair the filesystem according to TNC, turns
to rebuild filesystem if TNC/master/log is corrupted. Always make
fsck succeed.
4. check mode: Make no changes to the filesystem, only check the
filesystem.
5. rebuild mode: Scan entire UBI volume to find all nodes, and rebuild
filesystem, always make fsck success.
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: Frederic Germain <frederic.germain@gmail.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
On some SPI NOR flashes you can actually erase the OTP region until its
fully locked. Add a small utility for that.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
The nandflipbits tool is intended to be used when one need to flip one or
several specific bits on a NAND media.
It can be useful to manually recover from an unexpected bit flip on a flash
device, though the main purpose of this tool is to provide a way to test
ECC algorithms robustness.
One typical example I used this tool for is testing HW ECC engines behavior
when bitflips occur in an erased page: most HW engines do not correctly
handle this case, because, most of the time, ECC bits generated for an
empty page are not all 1s, and, empty page detection embedded in such
engines is only validating that all bits are set to 1s (which is not true
when a bit-flip has occurred).
Another use of this tool is replacing nandbiterrs test which
absolutely do not work with MLC-like chips because of the rewriting of
the pages in raw mode to toggle ones into zeroes.
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
[miquel: Took Boris' work from 2014, addressed comments from Brian made
in 2015, updated it, tested more extensively and fixed issues]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
8f627247f6("mtd-utils: move libmtd source files to lib/ subdirectory")
removed fectest.c from the build system 10 years ago. Add it again.
Signed-off-by: Bastian Germann <bastiangermann@fishpost.de>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
This patch adds a program called "lsmtd". The program produces a pretty
printed list of the hierarchy of UBI and MTD devices on a system. It
tries to imitate the lsblk program from util-linux as closely as
possible.
A number of command line switches are available to fine tune what information
should be exposed and in what output format.
The goal is to have a simple way of displaying the complete MTD stack on
a system in a human readable form instead of piecing details together
from proc files and various UBI utilities.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Compiling for x86_64 generates a lot of warning because the PRIxoff_t and
PRIdoff_t are not properly defined, which comes from the missing
SIZEOF_LONG definition.
Use the autotools to generate a config.h header, include this header from
common.h and ask autoheader to generate the SIZEOF_LONG and SIZEOF_LOFF_T
definitions.
Use these new definitions to assign the proper descriptors to PRIxoff_t
and PRIdoff_t.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
|
|
Signed-off-by: Daniel Walter <dwalter@sigma-star.at>
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
|
|
Basically a user space port of the mtd sub page test kernel module.
In addition to the module parameters, the utility supports using
only a sub-range of the flash erase blocks with a configurable
stride and can restore the block contents after the test.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd page test kernel module.
In addition to the module parameters, the utility supports using
only a sub-range of the flash erase blocks with a configurable stride.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd read test kernel module.
In addition to the module parameters, the utility can scan only
a sub-range of the flash erase block with a configurable stride.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd speed test kernel module.
In addition to the module parameters, the utility can resture
the block contents after test and allows setting the maxium writes
for the test.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd speed test kernel module.
In addition to the block offset and count module parameters, the
utility supports a block stride and can restore the block contents
after test. Furthermore, a flag can be used to disable destructive
tests (i.e. only perform read speed tests).
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd stress test kernel module.
In addition to the block offset and count module parameters, the
utility supports a block stride and can restore the block contents
after test.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Basically a user space port of the mtd torture test kernel module. In
addition to the block offset and count module parameters, the utility
supports a block stride and can restore the block contents after test.
In contrast to the kernel module, the torture test is implemented by
the libmtd mtd_toruture function and thus doesn't allow for similarly
fine grained options on diagnostics.
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
This patch is largely based on Richards original RFC.
The major differences to the RFC patch are:
- Add missing sumtools & mtdpart targets
- Fix name of mkfs.jffs2 target
- Add missing subdir-objects option for non-recursive make
- Move all automake options to configure.ac
- Add manpages to install target
- Make XATTR & LZO support configurable
- Install binaries to sbin directory like in the old build system
- Install flash_erase wrapper script
- Add files missing from distribution target
Signed-off-by: David Oberhollenzer <david.oberhollenzer@sigma-star.at>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
* There is no code modification in this commit, only moving
* the files to proper place.
The user tools looks a little messy as we place almost
the all tools in the root directory of mtd-utils. To make
it more clear, I propose to introduce the following structure
for our source code.
mtd-utils/
|-- lib
|-- include
|-- misc-utils
|-- jffsX-utils
|-- nand-utils
|-- nor-utils
|-- ubi-utils
|-- ubifs-utils
`-- tests
Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
|
|
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
|
|
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@intel.com>
|
|
First, the top-level Makefile should not tell git to ignore sub-level
.gitignore files.
Second, add simple .gitignores to ignore the executables generated under
the various `tests' subdirectories.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <dedekind1@gmail.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|
|
Linux FLAT toolchains produce .gdb files alongside the normal program
for debugging purposes (so linking to "foo" will also produce "foo.gdb").
Ignore these too.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
These have overlapping functionality, and while flash_eraseall supports
newer 64bit ioctls, flash_erase does not. So rather than graft support
onto flash_erase, merge the functionality of two into flash_erase so we
only have to support one util from now on.
A simple wrapper is provided to ease old flash_eraseall users into the
new combined flash_erase util.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
|
